Maybe but he went into the palette with back tilt and he got the top of the pallette. U can see it very clearly at the end. He actually had afew chances here where he could of fixed it. But ahh well
I see several red flags. Forks are not opened wide enough. When the stack was leaning to the right, he then reverses to the right, "unbelievable". Smart thing to do is, Once the stack started to lean, immediately aborted the mission and bring the load down. Good Forklift operators dont take risks. You only make things worse when you take risks.
Been drivin for a while and all im sayin is well put but I’ll add that I would’ve taken the top two first if not the very top one first then unloaded the last box
Шире вилы, и взять ближе к краю той стороны которая падает. Глубже нужно заехать. Там снизу валяются удлинители вил, они мешают заехать глубже. Еще он взял по диагонали ящик. И ящики скорее всего пустые, так что не партесь!
And this my friends is why I’m having doubts as becoming a driver. Everyone sayin get the top one but it seems like he wasn’t really focused. My worry is cutting corners and dropping product
besides taking the top one off first, if he wanted to take all 3 at once, he shoulda just widened the forks bc they were way too close together and then he coulda adjusted them to where it was more balanced and it wouldve came off all at once with no problem
Could just got the top one off first
Dummy
Facts
I was sitting here thinking the same shit😂 I’ve drove forklifts for years and I was just looking like 😒 you doing too much
That's a lazy ass thats why.
Forks don't go that high.
Dude had all the chance in the world not to screw this up and still chose to screw this up
I can't!!!!😂
That's the life of being an operator. We make mistakes every now and then.
I just started forklift and I could've figured this out. Start at the top bring each one down then stack them again. It's ok bro
I find it funny he didn't figure out it was too unstable to lift in the first place.
Exactly
Looks like he’s trying to fix someone else’s stacking job.
made it worse lol
And he obviously doesn't know what he is doing!!! Top one first then on down!!!! Stupidity reins!!!
Least they didn't drop it and stopped so it could be fixed and saved from damage
Maybe but he went into the palette with back tilt and he got the top of the pallette. U can see it very clearly at the end. He actually had afew chances here where he could of fixed it. But ahh well
Drug test asap
He is teaching us how to get fired😊
Why did he just keep going 😂😂😂😂 I woulda stopped and grabbed someone smarter for help
And the worst operator of the year award goes to
Bro isn't an operator he's an opportunist
What I drop is mine😂 FLT Code😉
This was the worst attempt ever.. didn't call for help, didn't double check for another way...
Not once was the load braced against the mask. It probably would have sat nice and pretty if he did, and watched his speed.
Me going through the comments to see if someone called Mr. George.
He got called in on his day off to cover a shift.
As a Certified Forklift Operator, this makes me so mad and cringe at the same time.
Bro just wanted to destroy 😂
There are so many ways he could have gone about this that would not have resulted in mayhem lol
I was hired right after this incident. That was my thing.
She say hard work bro don't give up
Why if a load is tilted like that you always start from the top down stack them and then re stack them.
Хороший рабочий на вес золота 😂
Genius!! In these cases, you download one at a time! 😤
Is operator ko firkilft
drive karni nahin aati😂😂
That's why people are afraid to hire.
Tell me you're a rookie without telling me you're a rookie
Well atleast he got them down 🤣
tetap sabar bang dan selalu semangat.
setiap masalah pasti ada jalan keluarnya.
sukses selalu👍👍👍🤗🙏
Everything that could go wrong went wrong 💀
He jus said fuck it
I see several red flags. Forks are not opened wide enough. When the stack was leaning to the right, he then reverses to the right, "unbelievable". Smart thing to do is, Once the stack started to lean, immediately aborted the mission and bring the load down. Good Forklift operators dont take risks. You only make things worse when you take risks.
Been drivin for a while and all im sayin is well put but I’ll add that I would’ve taken the top two first if not the very top one first then unloaded the last box
I agree
Consider the driver. Nuff said
🤦🏾♀️could've gone top to bottom. 🤦🏾♀️🤦🏾♀️
Probably the first to get promoted.
Should’ve went after the top 2 crates my guy when the weights shifting at the top js
He gave zero fu#!$
Never look back : this guy
Шире вилы, и взять ближе к краю той стороны которая падает. Глубже нужно заехать. Там снизу валяются удлинители вил, они мешают заехать глубже. Еще он взял по диагонали ящик. И ящики скорее всего пустые, так что не партесь!
Clearly this guy is not qualified to operate a forklift 😂😂😂
And this my friends is why I’m having doubts as becoming a driver. Everyone sayin get the top one but it seems like he wasn’t really focused. My worry is cutting corners and dropping product
Yapması gereken iki şey var
1 kafasındaki şapkadan kurtulmak .
2 en üstteki paletten indirmeye başlamak.
😂😂😂 je pense que ce travail est pas pour lui 😂
I trained forklift drivers. The top 1st, since it is unstable.Then determine if they can be restocked and moved.
Office staff helping out
Lazy instead of trying to get it down one but dude thought he could still get them all at once
I literally pick 4 together by God's grace
And I'm here unable to get a job offer from Canada despite my talent. How on earth do you mess up like this.
He doesn't deserve that licence
Наберут по объявлению)) 😂
บนออกก่อนใจเย็นดิ โธ่..ชีวิต หนักกว่าเก่า
This literally just happened to me at wotk
I cant find job as a operator who is take like this man their company ı almost lost my mind lol
Nope, couldn't take the top off... They don't pay enough.
he should of started from the top smh
He might have gotten all three pallets. If he would have opened his forks up wider. They look to close together for that pallet size.
This is a no brainer …..
Seemed 100% avoidable
Bro lied on his application
your experience is excavator then you apply forklift operator
than the specified weight What to do if another officer tells you to load more
And off coarse no seatbelt. I’m a safety officer and I see this a lot. Incident report galore
he don't give a darn 😅
I would just leave it for the next driver to drop
It was actually stacked just fine. The problem was the idiot didn't open up the tines and picked it up at one of the worst possible angles.
Adjust that second one and you can move the 3rd and be coo
If only there was a way to remove the top one first
"Mr. Georgggge...."
So hard 😭
I am also MHE OPERATOR
I would have done that a bit differently.
I was kinda rooting for him at one point
Why? He had at least 3 chances to see it was unstable and set them down and get it right!
dia dapat lesen rasuah😂😂
Take the top one off first, bro 😂
Yeah he lacks common sense 😂
Would help if your forks were strait 😂😂
Fucking hilarious comments bro.😂😂😂😂
Slide the triple stack to the right to brace and remove the top 2 stacks that's some rookie shit he did
He’s no forklift driver!
I want problem always 😅😅😅
Could have gotten them one by one, or like home boy below says the top one first. Reckless actions. Reminds me of me.
He had a chance though
This is a misjujment by the driver. He must think first before doing.
Picking up the top one first is the key.
EXACTLY! Why risk toppling them ALL over when you have a good chance of getting them down one by one with NO damage done!!! Lazy stupid or both!!!!!
So much he could have done....
But didnt.... 😢😔
Probably could have pulled it off if forks where spread
Who let this guy drive a forklift?
Re-stack from the top
How did he get a licence
If you ever feel useless in life, resort to this video
Get off that truck.
Why he didn't take off the top one first
I gotta think he just did that on purpose
Sub sa pala top wala us k bad dusra num wala pher last wala
Oh, Look.....A job opening!!!
2 at most 😂paid the price for his over inflated ego
He should just take the one from up
Why didn't he grab from the top ?
Hello mr. George how much you pay for the new guy LOL
besides taking the top one off first, if he wanted to take all 3 at once, he shoulda just widened the forks bc they were way too close together and then he coulda adjusted them to where it was more balanced and it wouldve came off all at once with no problem
Start by the top taking 1 by 1 ??
But I just wanted the bottom box
Kalu barang yg di atas mau jatuh jangan dipaksakan ngambil di bawah... Du jadinya beginih jatuh kan
No, thats not a Forklift driver problem, thats an idiot driver problem. I bet even a 5th grader could tell how to fix that properly.
They are empty He didn’t care
Top one first mate lol
he should take out the top first then the next then restack. common sense is free.