RCI-2970N4 for Keliinui in HI

RCI-2970N4 Tune up Report for Keliinui in HI on 6-16-22
--- This WAS a Private video for Keliinui with just brief editing
and only one camera.
--- Tested with an Astatic 636L microphone 🎤
www.bellscb.com
To BUY a radio like this:
www.bellscb.com/products/tenm...
𝗖𝗵𝗮𝗽𝘁𝗲𝗿𝘀
0:00 - *** 𝙄͟𝙣͟𝙩͟𝙧͟𝙤͟𝙙͟𝙪͟𝙘͟𝙩͟𝙞͟𝙤͟𝙣͟ ***
--- 𝗖𝗮𝗿𝗿𝗶𝗲𝗿 𝗣𝗼𝘄𝗲𝗿 𝗦𝗲𝗰𝘁𝗶𝗼𝗻 ----
0:48 - AM High Power Carrier (100w)
1:00 - AM Low Power Carrier (10w)
1:05 --- 𝗣𝗲𝗮𝗸 𝗣𝗼𝘄𝗲𝗿 𝗦𝗲𝗰𝘁𝗶𝗼𝗻 ----
1:17 - AM Low Power PEAK (200w)
1:28 - AM High power PEAK. (490+w)
1:38 - SSB High power (430w)
1:49 - SSB Low power (340w)
2:07 - SSB USB Frequency check with Stryker SR-955HPC
2:19 - SSB LSB Frequency check with Stryker SR-955HPC
2:43 - Echo Adjustment
3:15 - Echo knob location for decent sound
3:36 - HI CUT switch demonstration
3:50 --- 𝗢𝗻-𝘁𝗵𝗲-𝗔𝗶𝗿 𝗥𝗮𝗱𝗶𝗼 𝗖𝗵𝗲𝗰𝗸 𝗦𝗲𝗰𝘁𝗶𝗼𝗻 ---
4:25 - They heard me but I didn't hear them.
4:48 - Contact with Raven in FL
5:41 - My signal as recorded at Ravens Base station 10 miles away
🔴 Screwdriver’s comments
------------------(◣_◢)-----------------
Thank you for watching. Please Subscribe to my channel to see more videos.
Click the 🔔 “BELL” for Email Notification.
Remember to click the "notify bell" to receive
notices when I post new material. You don't
get notified by just subscribing, you have to click
the BELL to get emails when we post a new video.
That's just how RUclips does it.
DON'T MISS ANOTHER VIDEO: Follow these steps
⏵1. Visit my channel page ( / bellscb1 )
⏵2. If you're not subscribed, click the Subscribe button.
⏵3. Click the bell icon. 🔔 (so important)
⏵4. A dialogue box will appear, allowing you to select to
receive 𝗔𝗟𝗟 notifications.
Did you like my video? .... Please click 👍 LIKE and comment.
Did you hate my video? .... Please click the 👎 DISLIKE and 𝙋𝙊𝙎𝙏 𝘼
𝘾𝙊𝙈𝙈𝙀𝙉𝙏 telling me what you did not like.
Your comment means so much to help me do
better.
Please remember, this is for giving a vote on
my VIDEO - NOT the radio. If you don't like the
radio, please don't dislike my video.
● Website: www.bellscb.com
● Subscribe to our RUclips channel: / bellscb1
● Like Us on Facebook: / bellscb
● Contact us: [e-mail]
Disclaimer : The information contained on the video is for general information purposes only. Bells CB LLC assumes no responsibility for errors or omissions in the contents of the video. In no event shall Bells CB LLC be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, negligence or other tort, arising out of or in connection with the use of this video or the contents of the video.
Bells CB LLC reserves the right to make additions, deletions, or modifications to the contents of the video at any time without prior notice.
IF for ANY reason you feel this video violates your rights, inform us immediately at "[e-mail]" and the video will be removed until the issue is resolved, or deleted permanently if necessary.
© 2022 Bells CB LLC
All Rights Reserved.
𝅘𝅥𝅯 Music by :
Technology Calm Logo 02 by TaigaSoundProd®
Link: www.filmmusic.iosong6670-technology-calm-logo-02
License: www.filmmusic.iostandard-license
📽️ Video Processing and editing:
𝑺𝒄𝒓𝒆𝒘𝒅𝒓𝒊𝒗𝒆𝒓
Bells CB LLC ®
www.BellsCB.com
M211000657

[@Optimus2179]

That echo sounded great around 2:44

[@bblod4896]

That brings back good memories. 😢

[@aaronson2540]

Good to see you Bell it's been awhile hope all is well sir...

[@taylerchism2946]

I have been watching your videos for years, if my galaxy dx 33 hml ever goes out I will be giving you a call to get a Stryker 655 from you. Keep up the good work!