Why use iNav when you can use Arducopter, it does everything iNav can do and so much more. I am building a Arducopter build based on the flywoo Explorer LR 4 v2 frame, using a Holybro Kakute H743 mini v1.3 flight controller and flywoo Nin v2 1404 2750kv motors. I'm having a hard time finding a Am32 3 to 6s 20by20mm esc 30mm or less corner to corner or what fits between the standoffs. Can you please help me with a recommendation
My Flywoo Explorer came shipped with an M10 gps but the magnetometer wires were clipped. After extending the two wires and attaching to the flight controller the magnetometer works fine now. The sda and scl wires need to be reverse connected though because the label on the gps is wrong.
Hi :) I am probably a littke late but atm i do the same as you've done in the Video with my Explorer LR4v2-Walksnail and inav 7.1.0. Flywoo sent me the correct firmware for theyr new f722 pro mini FC. Do you still have a dump of your final settings done in inav 6? I would be very happy if you have them and would sharing this with me :) Sorry for my bad english, greetings from Austria
Why use iNav when you can use Arducopter, it does everything iNav can do and so much more. I am building a Arducopter build based on the flywoo Explorer LR 4 v2 frame, using a Holybro Kakute H743 mini v1.3 flight controller and flywoo Nin v2 1404 2750kv motors. I'm having a hard time finding a Am32 3 to 6s 20by20mm esc 30mm or less corner to corner or what fits between the standoffs. Can you please help me with a recommendation
Are you still flying your LR 4? Have you made any more modifications to it?
I really like Alt Hold and Pos Hold. #1 reason to go to iNav.
Thank you. Can you please make more Flywoo Explorer LR 4 V2 videos
My Flywoo Explorer came shipped with an M10 gps but the magnetometer wires were clipped. After extending the two wires and attaching to the flight controller the magnetometer works fine now. The sda and scl wires need to be reverse connected though because the label on the gps is wrong.
Do you know where I could buy the mount to hold the RDQ BN-880 with a compass module? Thanks for the vid I am going to try this project.
Did you solve the dip issue? My Flywoo Explorer with inav dips to the front right when i punch out.
Hi :)
I am probably a littke late but atm i do the same as you've done in the Video with my Explorer LR4v2-Walksnail and inav 7.1.0.
Flywoo sent me the correct firmware for theyr new f722 pro mini FC.
Do you still have a dump of your final settings done in inav 6?
I would be very happy if you have them and would sharing this with me :)
Sorry for my bad english, greetings from Austria
I'm with a drone here when I change from angle mode to gps it gives an accelerated one. can you tell me where you move the inav to see this?
I am not sure what you are asking. You are switching from angle mode into gps? Meaning you are switching to POS Hold?
LONG VIDEO !