I always want one, but instead I impulsively bought the complete opposite, I have a we-tech ct25 (aka pocket pistol) and it’s the most fun thing I have to use
I use to run them full auto co2 ones and ran two of them at once. Was running around like them guys from the movie boondocks saints. It was the most fun I've ever had in my early airsoft years
My WE Desert Eagle is by far my favorite sidearm and primary during pistol only games. I replaced my bucking with an MR Hop and my barrel with an EdGI barrel (which I then wrapped electric tape around so that it doesn't wobble inside the outer barrel) and it's a laser that kicks like a mule (compared to my WE G18C anyway), it always puts a smile on my face when I use it. Only had to replace one part out of a year's worth of use (slidelock bar broke) so far and I'm expecting wear and tear to happen sooner or later for other parts but other than that, I couldn't be happier with it.
@@Audriux6 It's arrested through a metal pin-wedge, the thing that fell out at 2:00. He should have knocked it in again more firmly with a makeshift hammer, by the way, as it will definitely fall out again. I use a screwdriver-extension and a larger hex-tool to hammer it out and in again. The inner barrel plus hopup-unit will fall out off the outer barrel, once that pin is out of the way.
My Cybergun Deagle suffered from a broken trigger-spring (the one that also arrests the slidelock wire) and a broken valve-knocker. Both I could easily get from KYAirsoft in HongKong. But, I noticed that I could replace the trigger-spring with a spring from one of my wife's hair-clamps! Those springs are quite similar to that trigger-spring. It only took some tweaking with a plier to make it fit, and now I simply keep in in there, even after I received the actual replacement from HongKong! The valve-knocker was not something that I could improvise. I got the replacement and watched a RUclips video to instruct me about the entire operation. I was apprehensive about that job at first, knowing how fiddly it may become, but once I took the trigger-group cautiously apart, step by step, it all went well, and I had a properly working trigger-unit in no time at all.
Yes indeed, the CO2-version is the snappiest of them all. Once you start to compare the green gas and the CO2 side by side, you will notice the difference. The green gas Deagle is kind of fine, but the CO2 is merciless!
I have deagle but from company called HFC. Its full polymer but it has epic blowback anyway. Let's be honest here, you don't buy deagle to outperform other pistols. You buy deagle for hefty kick that this gun has
If you like the look and feel of a metal Deagle, go all the way and buy the 10" extended barrel "zombie killer" for it, like KYAirsoft in HongKong offers it. It's awesome, and I even can shoot more straight with it. Be aware though, this 10" barrel is not for the Tokyo Marui version, although, they have a proprietary extended barrel Deagle. The 10" zombie-killer fits the WE/Cybergun full-metal Deagle. I can highly recommend it, if you love your WE/Cybergun Deagle.
Terrific review! FYI i'm pretty sure that's the silver version, not the chrome version? I have a chrome TM deagle and plan to get this one as well and the chrome version of this is a mirror finish not a satin silver like this one. Edit: got the black one 🤗
I had quite a few of them (TM and WE), honestly the kick isn´t that crazy. Disassemble the WE once and you will notice that the slide itself is insanely light and thin. The only nice thing it has is the full travel slide. The TM Deagle has the better hop up, the mags are easier to load, arguably the nicer chrome finish, the form of the hammer is more accurate (look at pictures) and many more things. +the TM Deagle slide is steel reinforced from the inside so the durability argument is not as striking as you might think.
I have Desert eagle from WE cybergun too, but in clasic version and black color :D it is huge and amazing airsoft GBB and the reason why I got a nickname GasMaster :D :D
I've had so many Airsoft desert eagles from different brands and they all share the same flaw: weak loading nozzles. Still don't understand why they don't make the damn loading nozzles out of metal!
Because it's a molded part. Cheaper and to be fair it can be good even if it's plastic like my VFC or GHK nozzles. Also most of the Alu nozzles tend to not work - I assume because metal on metal friction or just poor design.
I have the Cybergun CO2 full auto version. Well, in full auto you have a very good chance to miss the broad side of a barn. But it's fun and that's what matters. Shoots way too hot, 1.4J but even if it weren't I wouldn't take it to a game, it's just unnecessarily big. I only bought it for plinking and because my collection needed the plain black version, just like the ones in the first Matrix movie, no rails or compensator on mine, just the two upper slots.
It’s a great gun but, it’s better when using red gas. I haven’t tried it with black gas. Warning ⚠️ don’t use co2 to charge the green gas mag I ended up cracking the valve. Also it’s very difficult trying to find replacement HopUp chambers.
dumping ruins the pressure super quick.. not only r u using a lot of gas for the slide but youre also freezing the magazine lowering the pressure like crazy.. it performs terribly for quick shooting. Id say get AEP for fast shooting
@@CryBite For airsoft, I agree. An electric would be the route to go for rapid fire. I was more or less being sarcastic with reference to my 50AE. Naturally their capacity isn’t remotely similar to an airsoft variant.
You guys must try Marushin Desert Eagle 8mm out of box no upgrades shoots on green gas 430Fps on 0.45G 8mm!!! Long Desert 10 inches shoot 530Fps because inner barrel goes to the end of outher barrel and because is non-blowback. I must use duster gas or 134a gas lower performance in the game lol.
It's practical when a Glock or 1911 feels like a small toy in your hands. The Deagle is the only gun that doesn't feel tiny far too small. Also, the WE Tech Deagle grip is the exact same size as any Hicap grip. If you use a hicap and say this, you're a hypocrite.
Mam jak puvodniho deagla od We tak i tohodle, prvni Deagle me 2 roky fungoval pouze na black gas a nic se mu nestalo od zacatku jsem na to pouzival 40 gule ted jsem presel na 32. za me nejvice spolehliva zalozka
Who is hooked just like me?
I always want one, but instead I impulsively bought the complete opposite, I have a we-tech ct25 (aka pocket pistol) and it’s the most fun thing I have to use
I use to run them full auto co2 ones and ran two of them at once. Was running around like them guys from the movie boondocks saints.
It was the most fun I've ever had in my early airsoft years
I just orederd 1 yesterday, the L6 variant in black.
i have buy that one (but black) i want to chage the Inner barrel (for the ssp18 one) and the Hopup bucking
have a TM chrome green gas Deagle and still after seeing this bought it in black CO2 you guys convinced me 😎
It has a freaking GBB rifle nozzle and hop up. That's how huge the gun is. And that's how awesome it kicks.
My WE Desert Eagle is by far my favorite sidearm and primary during pistol only games. I replaced my bucking with an MR Hop and my barrel with an EdGI barrel (which I then wrapped electric tape around so that it doesn't wobble inside the outer barrel) and it's a laser that kicks like a mule (compared to my WE G18C anyway), it always puts a smile on my face when I use it. Only had to replace one part out of a year's worth of use (slidelock bar broke) so far and I'm expecting wear and tear to happen sooner or later for other parts but other than that, I couldn't be happier with it.
How do you take out the inner barrel?
@@Audriux6 It's arrested through a metal pin-wedge, the thing that fell out at 2:00. He should have knocked it in again more firmly with a makeshift hammer, by the way, as it will definitely fall out again. I use a screwdriver-extension and a larger hex-tool to hammer it out and in again. The inner barrel plus hopup-unit will fall out off the outer barrel, once that pin is out of the way.
My Cybergun Deagle suffered from a broken trigger-spring (the one that also arrests the slidelock wire) and a broken valve-knocker. Both I could easily get from KYAirsoft in HongKong. But, I noticed that I could replace the trigger-spring with a spring from one of my wife's hair-clamps! Those springs are quite similar to that trigger-spring. It only took some tweaking with a plier to make it fit, and now I simply keep in in there, even after I received the actual replacement from HongKong!
The valve-knocker was not something that I could improvise. I got the replacement and watched a RUclips video to instruct me about the entire operation. I was apprehensive about that job at first, knowing how fiddly it may become, but once I took the trigger-group cautiously apart, step by step, it all went well, and I had a properly working trigger-unit in no time at all.
There are Co2 mags available for the WE, even more kick and they shoot bang on 330fps on a .2
Do You have it?
@@Frambhueee yes I have the green gas and co2 mags. I did a review on my channel
Yes indeed, the CO2-version is the snappiest of them all. Once you start to compare the green gas and the CO2 side by side, you will notice the difference. The green gas Deagle is kind of fine, but the CO2 is merciless!
I have deagle but from company called HFC. Its full polymer but it has epic blowback anyway. Let's be honest here, you don't buy deagle to outperform other pistols. You buy deagle for hefty kick that this gun has
i also have a hfc deagle, it broke after a week and i blew 150$
I need a holster mount like that. That thing is sick. I need something to hold my 44 magnum lol
Mine slings .48 beyond 80m, all from a maple leaf barrel, bucking and nub. Amazing pistol due to the m4 parts it uses
@Josef Mucha where can we expect a GBBR project from you? :D
Use "old used hop up buckings" for inner barrel stabilizers in CyberGun Desert Eagle.
If you like the look and feel of a metal Deagle, go all the way and buy the 10" extended barrel "zombie killer" for it, like KYAirsoft in HongKong offers it. It's awesome, and I even can shoot more straight with it.
Be aware though, this 10" barrel is not for the Tokyo Marui version, although, they have a proprietary extended barrel Deagle. The 10" zombie-killer fits the WE/Cybergun full-metal Deagle. I can highly recommend it, if you love your WE/Cybergun Deagle.
Uhh i definetly didn't need another purchase idea... OH WELL i guess i'll have to get one
Terrific review! FYI i'm pretty sure that's the silver version, not the chrome version? I have a chrome TM deagle and plan to get this one as well and the chrome version of this is a mirror finish not a satin silver like this one. Edit: got the black one 🤗
I had quite a few of them (TM and WE), honestly the kick isn´t that crazy. Disassemble the WE once and you will notice that the slide itself is insanely light and thin. The only nice thing it has is the full travel slide. The TM Deagle has the better hop up, the mags are easier to load, arguably the nicer chrome finish, the form of the hammer is more accurate (look at pictures) and many more things.
+the TM Deagle slide is steel reinforced from the inside so the durability argument is not as striking as you might think.
I have Desert eagle from WE cybergun too, but in clasic version and black color :D it is huge and amazing airsoft GBB and the reason why I got a nickname GasMaster :D :D
Any problems with your desert? Mine did broke on the outer barrel, but even with the barrel broken can shoot
@@Frambhueee no I haven’t any problems yet… I think … only first time when adjusting hop unit is screw and leaver stick together (sorry for engl.)
What size Allen Key do we use to adjust the hop up??? Can’t find out anywhere!!
on mine you adjust it by hand no allen needed but his may be diffrent
I've had so many Airsoft desert eagles from different brands and they all share the same flaw: weak loading nozzles. Still don't understand why they don't make the damn loading nozzles out of metal!
Because it's a molded part. Cheaper and to be fair it can be good even if it's plastic like my VFC or GHK nozzles. Also most of the Alu nozzles tend to not work - I assume because metal on metal friction or just poor design.
I shot this older version of the WE Deagle with green and black gas in 23°C it did 2-3 mags.
I have a feeling it can survive a lot of pressure.
Mine broke. The canon, fixed it, then the slide…
quick and stupid question i recently bought my first gbbr, what speedloader do you use/recommend ? i need one that fits my WE Scar H
Any regular AEG speedloader works, just hold it pressed in the right angle against the mag. Needs a little bit of practice
not me 2 good dam BIG LOL I like the ssp18 :) But do the novritsch flashlight fit in the novritsch ssp18 pistolholster ? :D
Might buy this just for the looks
When will we be seing some gbbr gameplay again ?
I have the Cybergun CO2 full auto version. Well, in full auto you have a very good chance to miss the broad side of a barn. But it's fun and that's what matters.
Shoots way too hot, 1.4J but even if it weren't I wouldn't take it to a game, it's just unnecessarily big. I only bought it for plinking and because my collection needed the plain black version, just like the ones in the first Matrix movie, no rails or compensator on mine, just the two upper slots.
That's not hot where I'm at.. I don't think my field has a j limit for pistols
Do you ever come to Tocna?
What holster do you use with this gun?
It’s a great gun but, it’s better when using red gas. I haven’t tried it with black gas. Warning ⚠️ don’t use co2 to charge the green gas mag I ended up cracking the valve. Also it’s very difficult trying to find replacement HopUp chambers.
uhhhhh.. let me watch this 😎🤙
look who's here :) Already ordered the DE? :D
Nov really needs to make a ssp .50 or whatever he would call it.
I have one, but I keep it as collectors item, it is very heavy for gameplay
With my we pdw, I rock the we m92a1
DE's a bit big lol 😆
I got jelly with that mag dump. Mine has a max capacity of eight, including the charged round.
dumping ruins the pressure super quick..
not only r u using a lot of gas for the slide
but youre also freezing the magazine lowering the pressure like crazy..
it performs terribly for quick shooting.
Id say get AEP for fast shooting
@@CryBite For airsoft, I agree. An electric would be the route to go for rapid fire. I was more or less being sarcastic with reference to my 50AE. Naturally their capacity isn’t remotely similar to an airsoft variant.
Big pistol!
Pretty cool gun
Nezahraješ někdy s nějakou mp7?
Třeba tou wellovkou za 2k😂
OH YEAH!
Mines turned a few heads at the local park
You guys must try Marushin Desert Eagle 8mm out of box no upgrades shoots on green gas 430Fps on 0.45G 8mm!!! Long Desert 10 inches shoot 530Fps because inner barrel goes to the end of outher barrel and because is non-blowback. I must use duster gas or 134a gas lower performance in the game lol.
I’m using propane gas with an adapter on a one pound bottle, will that hurt my gun?
Is it big? Yes. Is it fun? Yes. Is it practical? No.
It's practical when a Glock or 1911 feels like a small toy in your hands. The Deagle is the only gun that doesn't feel tiny far too small.
Also, the WE Tech Deagle grip is the exact same size as any Hicap grip. If you use a hicap and say this, you're a hypocrite.
its more practical than its real counterpart at least.
Nobody ever said glock or 1911 feels small xD Unless its a glock 43@@Gojira_Wins
It’s aluminum alloy
Mam jak puvodniho deagla od We tak i tohodle, prvni Deagle me 2 roky fungoval pouze na black gas a nic se mu nestalo od zacatku jsem na to pouzival 40 gule ted jsem presel na 32. za me nejvice spolehliva zalozka
You from czech Republic joshef
He is from Austria
@@herbertplatzer2172 nah he's from czechia
it have c02 maggs so ofc it can take any gas
I wish we had Black gas here in America
Guns bigger than you