That's a neat project. I recall making one similar when I was in Scouts many, many years ago. If I remember correctly we used them to drill through the framing for a canoe to run the lacing for attaching the outside covering. Thanks for the video and for jogging the memory.
I just watched the version of Primitive Technology channel's on this today. Was wondering about it from more of a modern bushcraft version and you answered. Mind reader.
Great to see a video where some one makes something , to many bushcrafter's just coping each other and making tarp shelters or duck tape tarp - plastic tents like the forts we made as kids out of junk and sometimes dad's good stuff that was meant for other things. Haven't seen any one make one since the guy from primitive technology did one years ago.
I like your wedding-ring tattoo. A very practical replacement for a ring, which could get caught in some of the machinery you operate...and a very permanent declaration! Some might not think it's romantic (because "--tattoo! le gasp!") but I think it's wonderful.
Pump drills are very cool. We us them with National Park Service school walks. The 4th graders get to use pump drills to make a hole in an abalone shell to wear as a necklace. The kids love using them (after the slight learning curve). The local Native American's (Chumash) used them once they were (sadly) brought into the missions. They were definitely not used by Native Americans here prior to the arrival of the Europeans, who brought over the pump drills. Your take on the build is very nice, I will have to try that out. We have much thinner and wider flywheels on ours, more like a "personal pizza" in size and shape.
Dave, I know you are a huge advocate of tarp shelters, what would you recommend for sheltering when in the south west deserts? There are scorpions, tarantulas, and lots of other critters I’m nervous of open air sheltering around, thanks.
Handy old school tool. I wonder if you notched the end to make it similar to a drill chuck and lashed it you could change the drilling tip for larger or smaller tips.
So the pumping action pulls on and thereby unwinds the cord wrapped around and held over the back end of the rod. It’s converting linear to rotary motion
You wind the string that is attached to the crossbar around the shaft. As it winds it becomes shorter and raises the crossbar up the shaft. When you push the crossbar down, it pulls the string and spins the shaft as it unwinds. At the bottom of the stroke the momentum will keep it spinning and wind in the oposite direction. He then releases pressure ast the string winds again. The wide cylender piece acts as a fly wheele.
you dont need to drill any holes. You can just split small logs and cut a tunnel down the sides of the splits, or you an use two sticks, and cut notches on the outsides of two small logs, used as your counterweights.
Hey Dave. Big fan since Dual Survival...please tell me...how did you become such a master expert at bushcraft? Are you self taught or did someone teach you? It blows my mind your sheer knowledge of so much man. It is nothing short of astounding.
I really cannot see the purpose of this but the rest your videos are doing damn good. I noticed you cooking over gas a lot now instead of fire like survival mode?
The purpose is teaching simple machines I have video on this same device making fire. I don’t cook on wood much because it’s not renewable quickly and I use fires EVERY DAY wouldn’t be long and I would have no material for the future or for students at my school
That little hold fast is awesome!
That's a neat project. I recall making one similar when I was in Scouts many, many years ago. If I remember correctly we used them to drill through the framing for a canoe to run the lacing for attaching the outside covering. Thanks for the video and for jogging the memory.
The original cordless drill, love it! Love that hold fast too.
Fun build.
Good to see Zahn supervising.
Dave, I've been studying your field guide to Trapping, Gathering and Cooking. It is fantastic. Thank you
I just watched the version of Primitive Technology channel's on this today. Was wondering about it from more of a modern bushcraft version and you answered. Mind reader.
Great to see a video where some one makes something , to many bushcrafter's just coping each other and making tarp shelters or duck tape tarp - plastic tents like the forts we made as kids out of junk and sometimes dad's good stuff that was meant for other things. Haven't seen any one make one since the guy from primitive technology did one years ago.
The ring of the metal at the end was the icing on the cake.
I like your wedding-ring tattoo. A very practical replacement for a ring, which could get caught in some of the machinery you operate...and a very permanent declaration! Some might not think it's romantic (because "--tattoo! le gasp!") but I think it's wonderful.
Pump drills are very cool. We us them with National Park Service school walks. The 4th graders get to use pump drills to make a hole in an abalone shell to wear as a necklace. The kids love using them (after the slight learning curve). The local Native American's (Chumash) used them once they were (sadly) brought into the missions. They were definitely not used by Native Americans here prior to the arrival of the Europeans, who brought over the pump drills. Your take on the build is very nice, I will have to try that out. We have much thinner and wider flywheels on ours, more like a "personal pizza" in size and shape.
LOVE the “old Dave” type videos.
Looks like a handy tool !!! Nicely done! 🇺🇸🇺🇸🔪🪓👍👍
You didn't really show how you achieved the rotation and the focus was on your arm when implementing the use.
That's a neat project, but I'm more interested in your little hold-fast. Did you make that, or buy it somewhere?
New item from our forge will be for sale soon on our site
Seems like a lot of work to accomplish what you accomplished at 2:40 with your swiss army knife. 🤷♂️ Still useful applications I'm sure.
It will start fires as well with a bit change I have past videos on this so it is multifunctional and teaches a simple machine
Nice vid. Ive seen your cooking vids that you drink ski. I live in IL and ski is made in Breeze IL too. FYI.
Dave, I know you are a huge advocate of tarp shelters, what would you recommend for sheltering when in the south west deserts? There are scorpions, tarantulas, and lots of other critters I’m nervous of open air sheltering around, thanks.
Handy old school tool. I wonder if you notched the end to make it similar to a drill chuck and lashed it you could change the drilling tip for larger or smaller tips.
Great project
I'll definitely try to start a fire with it.
Thank you.
Dave, as always... excellent, useful content!
Awesome video
Hi Dave !! What are those metal things that hold wood ?? Can I get them from somewhere ?? Thanks !
Great video
I must have missed something, but I can't figure out what makes it spin.
So the pumping action pulls on and thereby unwinds the cord wrapped around and held over the back end of the rod. It’s converting linear to rotary motion
You wind the string that is attached to the crossbar around the shaft.
As it winds it becomes shorter and raises the crossbar up the shaft.
When you push the crossbar down, it pulls the string and spins the shaft as it unwinds.
At the bottom of the stroke the momentum will keep it spinning and wind in the oposite direction.
He then releases pressure ast the string winds again.
The wide cylender piece acts as a fly wheele.
What is that cleat your using to hold the pieces down while you work on them haven’t seen that before.
New item from the forge coming to SRO soon
you dont need to drill any holes. You can just split small logs and cut a tunnel down the sides of the splits, or you an use two sticks, and cut notches on the outsides of two small logs, used as your counterweights.
Thanks Dave. I think it'd be wise for me to take this course before my advance survival course. This one or Land Nav intensive (or both someday).
Or more honestly
Could this be used as a fire drill too? Looks superior to a bow drill but i am not sure if it produces enough pressure against the fire board.
you would just hbave to change out he nail spindle and pot in a solid wood one and yes you will make fire
Have a video in my catalog
Hey Dave. Big fan since Dual Survival...please tell me...how did you become such a master expert at bushcraft? Are you self taught or did someone teach you? It blows my mind your sheer knowledge of so much man. It is nothing short of astounding.
So if you replace the nail, drill bit, with a stick of wood, could it work as a fire drill?
Have a video on that exact thing
Very NICE👍
Do you guys sell that angle iron with pin to clamp wood down? I didn’t see at SRO web page
Soon we are forging 100 sets right now
Hey Dave what's the multi tool model you used here please?
That’s cool brother!
Dave, a little explanation would help as well as you assembled the drill.
Gotta link for that vice apparatuse or will i have to make it? What did you use to flatten the nail? I use a piece of forklift fork.
New Forge shop prototype. Making 100 sets for sale now
That's pretty cool ,I remember you made one something like that to start a fire .
Where did you get that hand auger?
Do you sell them ?
Thanks Dave
I don’t get the purpose of the nail, a drillbit yes but I nail ?
Improvisation of common items
do you sell the scotch eyes and the small log dog?
The scotch eyes yes log dogs coming
Nice
NICE!!
Also why in the heck am i the only person commenting? This stuff is gold.
💖💖🎉🎉
Thank you
These videos would just not be the same without the cat.
Nailed it!
Ok Dave, I want to know about that holdfast!?
Coming out soon
i was thinking fire drill myself that hold fast is more interesting though!!!
I'm surprised Zahn's interested in this project since there's no food involved.
I really cannot see the purpose of this but the rest your videos are doing damn good. I noticed you cooking over gas a lot now instead of fire like survival mode?
The purpose is teaching simple machines I have video on this same device making fire. I don’t cook on wood much because it’s not renewable quickly and I use fires EVERY DAY wouldn’t be long and I would have no material for the future or for students at my school
That thing will beat the hell out of an egg...
Dave I guess I’m too stupid. I have no idea what you did and why . And the “hold tool” never saw that before. 🤷🏻♀️
Kitty! 😻
I need written instructions with diagrams. 😆
Or you could come to a course?
There's the cat.
i don't understand how everybody pushes silky saws but all of you's use Bahco Laplander
I use Bachos for Craft work and Silky for Firewood
BC 10000yrs...
....mm