Thanks Dana! I bought a set of Corsa Extreme mufflers to slap on it so we will see if I like it. You would have loved the current setup though for sure!
Nice video! I have a 2018 Cadillac CTS-V Championship Edition. I just ordered 2 x 3 in Kooks, going in Stainless works exhaust. Just ordered an LMP lid, 2.3 upper, and WXM XXX hx exchangers. A few other goodies coming, keep up the good content.
@@itsjustmyopinionfred831 Oh, man! My appointment is on July 17. kooks, 2.3 uppers, Weapon X triples, mighty mouse. Upgraded SC lid. I haven't seen any Championship edition out here in Washington. I have a white one as well 17,123 miles
@unclemel8276 That's awesome! Basically exactly what I want to do. I can imagine that is gonna wake it up nicely. I have been wanting one for years! Never thought I would find a Champ edition. I see a few now and then... but I'm just outside of Detroit, so lots of cool shit around here
If you had the valves closed with your setup & did a cold start like at 5am do you think it’d be quiet enough to not wake up the neighbors? Or does being catless make it that much louder?
Sucks noones made a full exhaust that has black tips with valves headers back lol. I have to piece together crap. I’m currently in the debate of this or just doing kooks headers back and deleting valves because that’s the cheapest route for a full exhaust
I just pulled the trunk fuse for the valves so they stay open all the time. That or you just unplug them from the muffler and ziptie them up somewhere safe. Billy Boat and Stainless Works have full exhaust setups that retain valves and it may not be advertised on their website but Billy Boat offers a black tip option as well. Just message them directly for that option and they will tell you how much it is. That or just Cerakote them black
Billy Boat is awesome! I looked at some Billy Boat mufflers but ended up getting some Corsa Extremes to see how I like it so we will see. Might do a before and after vid on it
Loved having my Billy Boat setup until the Valves started to fail after going FBO. Eventually, I took them out, so there wasn't a chance of them closing during a WOT pull and ruining the engine.
What all mods have you done and who did the work on your car n your tune im looking to get sum kooks headers n their exaust n upgrade my intake..... it sound better with the stock mufflers 2 me i think bcus the factory valves was made specific for this motor n exaust set up???????
I have a Dedicated Motorsports hidden fender expansion tank and about to install his Heat Exchanger as well. Best thing is meth or possibly a Interchiller but I didn't want to run either of those
Sounds amazing 💪🏻 and I love the plate 🤙🏻
Appreciate it!
Keep the vids coming!! Don't see to many on here.
Your right not much on the V3 really
Had to subscribe! Best video on youtube today! 🔥
Thanks and appreciate the sub!
Indeed music to my ears ✔️❤
Nice car looking good, sounding good!
Thanks Dana! I bought a set of Corsa Extreme mufflers to slap on it so we will see if I like it. You would have loved the current setup though for sure!
@Z06 DNA CTS-V welcomed I have a 2016 zo6 fully built with corsa extremes love it!!
@@danawooley9464 Still got the GTR?
@@z06dna Nah, sold it!
Love these Hellcat killer's 🔥🔥🔥
Nice video! I have a 2018 Cadillac CTS-V Championship Edition. I just ordered 2 x 3 in Kooks, going in Stainless works exhaust. Just ordered an LMP lid, 2.3 upper, and WXM XXX hx exchangers. A few other goodies coming, keep up the good content.
You have the best interior on your IMSA hands down! Very similar build to what I have. Nothing crazy but just enough to wake it up a little
I am waiting for my 2018 Championship edition(white) to arrive. So excited to start the mods
@@itsjustmyopinionfred831
Oh, man! My appointment is on July 17. kooks, 2.3 uppers, Weapon X triples, mighty mouse. Upgraded SC lid. I haven't seen any Championship edition out here in Washington. I have a white one as well 17,123 miles
@unclemel8276 That's awesome! Basically exactly what I want to do. I can imagine that is gonna wake it up nicely. I have been wanting one for years! Never thought I would find a Champ edition. I see a few now and then... but I'm just outside of Detroit, so lots of cool shit around here
@unclemel8276 Paid for it yesterday and should be here by Sat.🤞 11,700 miles
Sick plate
Appreciate it!
Man Ik it’s been a minute but I NEED to know where you got all the carbon fiber pieces. I’ve been looking everywhere and cannot find them
any drone with headers to stock muffler ?
If you had the valves closed with your setup & did a cold start like at 5am do you think it’d be quiet enough to not wake up the neighbors? Or does being catless make it that much louder?
How much hp did it make?
Sucks noones made a full exhaust that has black tips with valves headers back lol. I have to piece together crap. I’m currently in the debate of this or just doing kooks headers back and deleting valves because that’s the cheapest route for a full exhaust
I just pulled the trunk fuse for the valves so they stay open all the time. That or you just unplug them from the muffler and ziptie them up somewhere safe. Billy Boat and Stainless Works have full exhaust setups that retain valves and it may not be advertised on their website but Billy Boat offers a black tip option as well. Just message them directly for that option and they will tell you how much it is. That or just Cerakote them black
@@z06dna we wired the fuse to a toggle switch much like a Mild to Wild for intown and highway settings...
I was able to retain my stock factory valves with my billy boat cat back exhaust.
Billy Boat is awesome! I looked at some Billy Boat mufflers but ended up getting some Corsa Extremes to see how I like it so we will see. Might do a before and after vid on it
Loved having my Billy Boat setup until the Valves started to fail after going FBO. Eventually, I took them out, so there wasn't a chance of them closing during a WOT pull and ruining the engine.
@@calvinjames8291 FBO?
Beautifullly Done i say the front spoiler needs be almost touching pavement FULLTHROTTLE I SAY
ITO now we dont need air going under front end at top rate of speed I know from experiance ..POPEYE they call me ..
I want one so bad. That blue metallic or tungsten silver color, I don’t even like red but it looks sick
The next best color and hard to find is Vector Blue Metallic so if you find one of those you like jump on it! I love that color!
What all mods have you done and who did the work on your car n your tune im looking to get sum kooks headers n their exaust n upgrade my intake..... it sound better with the stock mufflers 2 me i think bcus the factory valves was made specific for this motor n exaust set up???????
Do more videos
Slowly but surely will!
What else was done to it to this point the pops are insane! Sounds sick!!
Thanks man! Headers to stock mufflers, intake, tune, upper pulley, DSX lid, and a few other bolt-ons
Just installed cam and kooks on my V3. what did you install to battle heat? Mines is pulling timing from the moon and the stars right now.
I have a Dedicated Motorsports hidden fender expansion tank and about to install his Heat Exchanger as well. Best thing is meth or possibly a Interchiller but I didn't want to run either of those
What do you have connectiong to the kooks headers for the x pipe an back?
The Kooks headers have catless connections pipes that connect directly to oem mid pipe (x-pipe)
There's a guy here in stl I talk to his audi says Z06 DNA too
That's awesome! Do you know the reason behind it on the Audi?
@Z06 DNA CTS-V not exactly but I was thinking because it's hi horse power and supercharged
I need a v3
Yes you do haha
Flooring it on a cold engine? 😬😬
I know I know
get corsa extreme axel back mufflers.. ya won't regret it...
I have had some for over a year and just never got around to installing them lol. Might slap them on and do a comparison video for them
god damn this sounds sexy
How does it do on these OK roads? Looking into getting one
It's lowered on Rennick Swift Springs and does really well. Biggest thing I worry about it the Carbon Front Splitter more anything