Truck shaking while driving check and repair work | truck repair India
HTML-код
- Опубликовано: 15 авг 2022
- Truck shaking vibrating while driving check and repair work | truck repair India
“Truck repair workers”
“Indian truck mechanics”
“Truck”
“Tata truck repair”
“Ashok leyland truck repair”
#truck
#truckrepairwork
#truckworkshop 
Наука
Tool box = 1 small hammer, 1 medium hammer and 2 large hammers. OK you are hired.
ha ha ha
No tyre rims check no wheel balance direct king pin 🤔
Riyaz Bhai assalamu walaikum
try to do that on TA. after a week and $3000 bill for labor u break down on the ramp on the same exit...
In India labour bill will be 200$ max
Hello? they the next time you need to change ( king pin ) when you go to put the new one back in >>>> ( Push them back in with the hydraulic jack on ) And you can push the old one out right on the truck!
Won't work. The jack would just lift the truck instead of pushing the king pin out. Been there, done that.
They use the press as a workbench? Why not ues the press as a press?
that's what the workbench is for
Thx my thoughts
Why are there's always old guys sitting around in the way of people trying to do shit?.. 🤣
Thank for Sharing .your work is like mine.
GREASE? dont need no stinking GREASE.
Embuchamento de manga de eixo mais sofrido que já vi
Every time I watch one of these videos in Pakistan (which are usually great) there is always a person sitting down just watching what’s going on. Did they buy a ticket to watch?
😀😀
also the sitter dosen't feel the need to move while people are using hammers a metre away from his face.
My thoughts....must be a sort of QM
It’s their claim to fame, some dude in canada watching you warm the chair
Lazy bones 😂
Sukses 👍👍👍
👍👍👍
Man they work and talk fast
We’re is the elephant
This is getting a little obvious when we never see the vehicle move under there own power after they "fixed" it. Let alone the fact that we could see they weren't even able to get the axle put back together. At all.
Shirt , pants , osha approved sandals.
Torque? No! Power tools? No! Hand? Yes!
very crude they dont have proper tools they only know to hammer
So who is the man sitting down in the middle of all the action? The shop foreman/shop owner? Not doing much to help except maybe yell out sh**. Has to be the shop foreman. 😉😆
Da hauen die Primitiven doch wirklich mit einem ganz dicken Hammer auf die Bremse und die Gelenke von der Lenkung. Alles klar4.
What a waste of time you put new bushings in but used the old king pins and bearings. You should never have to drive a new king pin in with a hammer. You should of used a king pin set, has new pins, bearings, bushings and shims. That was a lot of wasted effort.
А что этот расселся на стуле посреди гаража?Пахан наверное.
Yup definitely The Godfather!
I guess using that big red hydraulic press wasn't in the plan for pushing the king pins out. Guys just look behind you its right there ready to use in the shop... They would rather swing a 15 lb hammer a thousand times I suppose.
ITS THE REAL HANDS ON THING??????? I WONDER WHAT WAS WRONG !? PROBABLE A HAND BALANCED TIRE WITH AN OLD SCHOOL FRAMING SQUARE AND A 4FT LEVEL!!???
Press needs electricity and the hamster was on a break
They got all time and energy at their disposal. Thus the press wasn't at use.