RESPECT SIR IAM FROM HYDERABAD V R PLANNING OUR HOME CONSTRUCTION BUT THE PROBLEM IS LAND IS BEDROCK WHOLE LAND 125 SQ YARDS FOR FOOTINGS CLOUMNS OF PILLAR CAN V USE THIS HILTI OR ANY OTHER OPTIONS U ILL SUGGEST (DZ HILTI CHEMICAL COST ND VAILBLITY IN HYDERABAD ) PLEASE SUGGEST SIR
One mistake. As you slowly push the rebar into the hole, you must rotate anti-clock wise to ensure that the epoxy doesn't squeeze out because the rebar threads will keep the epoxy down. But when you rotate clock wise like you did, the threads will bring the epoxy up and out of the hole. Also make sure you clean the hole well and try to use rebars that are not rusty like the ones here. Clean them with a wire brush or soak them in a rust dissolver so that the epoxy adheres to the rebars completely. And its not a chemical, its an Epoxy.
You are wrong in the rotation advise. The lines are on opposite direction on the two sides of the rebar, so the direction of the rotation doesn't make a difference! As per Hilti instructions, the rebar need to be pushed inside and turned a little in both directions. And thats all.
@@qarayen1725 Can I ask you how many rebars you have installed WITH YOUR OWN HANDS? I have installed hundreds of rebars using Hilti 500 over the past 5 years and I am talking from observed personal experience, hundreds of times. Do you have this physical experience? The threads on the rebars we have here locally run only once side along the length of the bar. If you turn the rebar clockwise as it penetrates, the adhesive oozes out far more then when twisting anti clockwise, which makes perfect sense because the threads run one direction and as a result it locks the adhesive from pushing upwards. Ofcourse this is influenced on the design of the rebar, so maybe for some bars you will need to twist both ways if the threads are symmetrical (ie. run in opposite), of turn clockwise for opposite threads. In my experience, the local rebars we have from various countries all have the same design. And I know there are various design worldwide. Can you show where the instructions from Hilti that state that turning should be in "both directions"?
BAHOT accha Thanku
Good
best fishee r ka hai camecal kolne ke kitne time tak karab nahi hota0
Great wrok
Sir which brand chemical is best ?
Hilti re500
Kiska channel hai
RESPECT SIR
IAM FROM HYDERABAD
V R PLANNING OUR HOME CONSTRUCTION BUT THE PROBLEM IS LAND IS BEDROCK WHOLE LAND 125 SQ YARDS FOR FOOTINGS CLOUMNS OF PILLAR CAN V USE THIS HILTI OR ANY OTHER OPTIONS U ILL SUGGEST (DZ HILTI CHEMICAL COST ND VAILBLITY IN HYDERABAD )
PLEASE SUGGEST SIR
I have best deal for this chemical
How to clean mixing tube please tell.
It is one time use thing.
How much cost this machine
Chemical bhi Lete Hain 500 ka Bara 500
Price kya hai gun ka
or video daliye bhai jaan
Me laber rate kam krta hu kam ho to btana
Hame Kam karwama hai
Aap APNA number send kare
Iff u need same work in dubai cal me
Bhahut nadiya
One mistake. As you slowly push the rebar into the hole, you must rotate anti-clock wise to ensure that the epoxy doesn't squeeze out because the rebar threads will keep the epoxy down. But when you rotate clock wise like you did, the threads will bring the epoxy up and out of the hole. Also make sure you clean the hole well and try to use rebars that are not rusty like the ones here. Clean them with a wire brush or soak them in a rust dissolver so that the epoxy adheres to the rebars completely. And its not a chemical, its an Epoxy.
Thank bro for correction
Always suggest if I will do any mistake in video
Keep supporting
Like and share
Mere pass hilti 500 gun hai or mujhe bechni hai ye gun mai delhi se hu agar koi lena chahta hai to sampark kre 8802614461 par Dinesh
You are wrong in the rotation advise. The lines are on opposite direction on the two sides of the rebar, so the direction of the rotation doesn't make a difference!
As per Hilti instructions, the rebar need to be pushed inside and turned a little in both directions. And thats all.
@@qarayen1725 Can I ask you how many rebars you have installed WITH YOUR OWN HANDS? I have installed hundreds of rebars using Hilti 500 over the past 5 years and I am talking from observed personal experience, hundreds of times. Do you have this physical experience? The threads on the rebars we have here locally run only once side along the length of the bar. If you turn the rebar clockwise as it penetrates, the adhesive oozes out far more then when twisting anti clockwise, which makes perfect sense because the threads run one direction and as a result it locks the adhesive from pushing upwards. Ofcourse this is influenced on the design of the rebar, so maybe for some bars you will need to twist both ways if the threads are symmetrical (ie. run in opposite), of turn clockwise for opposite threads. In my experience, the local rebars we have from various countries all have the same design. And I know there are various design worldwide. Can you show where the instructions from Hilti that state that turning should be in "both directions"?
ada yg kepalnya warna hitam sama tidak kualitasnya tolong di jawab
Chemical chahie
Thekedar ka number mil jaega
मेरे पास केमाकल है
Kimat
Mere paas bhi hai kisi ko chahiye to batana
From jamshedpur
Sar iam hilti oppretor contact number please
Kaha se aap