Fix PS5 Controller Drift 🎮 Absolute Solution 🎮 with The Base Tools 🛠️
HTML-код
- Опубликовано: 21 янв 2024
- In this video we are going to show you how to fix drift for ps5 controller stick.
You can buy ps5 controller stick and replace the new one.
This video shows the absolute solution for stick drifting in ps5 controllers. 
Хобби
wow this is the easiest way i found..i thought i had to change the whole joystick. needed a heatgun and all that. this is actually much easier to just change the potentiometer. thank you!
That’s right… we just do it without heatgun. Thanks for your attention ❤️😄
I replaced the sliders inside for my right joystick & it worked perfectly. This was the first video I watched on the drifting problem so I had to leave a comment.
Thanks for your attention 🌸🌟
Start with just cleaning the potetiometer with alcohol or electronic cleaner. The black rings on the green part and just change the white wipers. No soldering needed and works 85 percent of the time. Nice video. The method in video will work best if you have had the controller a long time and are hard on the sticks.
Can you install a Hall Effect potentiometer instead of the regular one using this exact method ?? Like would the regular joystick work with a Hall Effect potentiometer or is the hardware different??
Awesome job! Once you broke out the soldering gun, my confidence dropped 😂. You make it easy.
opening up the DS4 was so easy and putting it back too but this one seem like a lot of things could go wrong.
Use flux and a copper braid to remove any remaining solder from the contacts. Always use flux when soldering, wetting and surface tension. You can also check the resistance of the potentiometers before installation. And please, clean the soldering iron tip.
Thanks for your advice 👍🏻🌸
Can you SEND program the base tools?
Man you think you can teach me how to do all the soldering?
Hello..You play DMZ call of duty with ps5 controller.. I can’t play the game show me the controller of Xbox buttons to play
Just take the little round thing out of the green thing and clean both things. Worked for me. I used rubbing alchohol and qtips.
And I pried it apart with a guitar pick.
Yes… sometimes it works… thanks for your advice 👍🏻🌸
Which cable is the one you took out on 2:43? I accidentally ripped that one and need to look for a replacement online
Two bottom side are two mics cables… both sides are triggers … up side is for touch pad.
ganda ng video, ganito kelangan natin sa Pinoy RUclipsrs or content creators yun may matutunan ka, hindi puro pa cute at pa raffle
❤️🌸
OR JUST GRAB HALL EFFECT STICK BOXES. WHY SOLDER IF ITS GOING TO HAPPEN AGAIN.
The orange ones have a different electrical resistance than the green ones.
They are not interchangeable!
This will usually lead to very high sensitivity.
Have you checked the difference?
You have to change the whole stick if you want to replace an orange one. It works properly and good without difference. It may survive more than usual one.
@@DIYVidss You're right.
It works when you change the whole unit and not just the sensor part .
I could have been more specific in my comment.
كيفية ترجيع خطوط مقطوعه انالوج دراع بلايستيشن 4
What temperature did you have it to desolder? I tried today and could not get it it to separate
It’s 60w soldering iron … it doesn’t designate the temperature.
Thanks
Welcome🌸🌟
I wanna do this but i’m so terrified of soldering. Especially when it comes down to the black and red wires.. the soldering of the pot looks fairly simple though
Yes it could be hard for first time 😁
@@DIYVidss Do you have instagram by any chance
@@danielm4136 No. I don’t 😁
The analog joystick is still the same as the previous version, it is easily damaged, with a more complicated machine board, it is even more difficult to replace it, for some reason Sony doesn't make the analog one easily removable, even though I hope it is replaced with a socket model
Thanks for your attention 🌟
Hey can you help please i changed the sensor while ps5 was in rest mode added a ps4 sensor that white thing but while i pluged the battery got a orange light blink later when i put the cover and everything together still the orange light blinked when i pressed the ps button later found out ps4 sensor are different so that might be the issue so restored back old sensor still facing the orange light issue. Tried resetting by pin from back of the controller still just gives orange light any idea whats wrong
Ps4 stick and ps5 stick are the same in controller board … that could not cause a problem. Maybe other sockets are not properly fixed on the controller board.
@@DIYVidss thanks for the reply
@rajasnawar8545 do you fix your problem?
I opend it took out both "discs" and replaced them with those from old dualshock 4.
Yea … it works 👍🏻
Idea: Could you give a fair price range for each repair that you do? That way, we (the ignorant) have a better better idea of someone giving us a fair shake.
Nice video
Thanks❤️🌟
good video 👍 😁😊 🇩🇴
Thanks for participating ❤️🌸
Where I can find like your tools
From amazon or ali express 😀😀
The no flux is crazy 😳😳
Thanks for attention 🌟🌸
Can you please fix my ps5 controller? The problem is stick dtift and i have no idea what to do
This video shows the absolute solution for this issue… the first try is cleaning the inside sticks with tuner spray and if it doesn’t work you have to change the stick on the ps5 controller board.
@@DIYVidss I dont know how tho
@@DIYVidssdo you have a link to the stick module
I have a novel idea,boycott Sony products until they put out a decent product .
I don't own a PS5 since I'm a Xbox player but opening a PS5 controller looks way more harder than opening a Xbox controller. This is why I prefer to not have a built in battery pack over either the choice of batteries or a interchangeable battery pack.
Appreciate 🌟👍🏻
So it tears down like a Dual Shock 3?? Nice.
no youre wrong
That looks WAY more complex than DS3.
Damn I thought he was a werewolf 😅😅
My stick gets physically stuck.. (pause) is this a fix for that?😂 for real tho?
Ok so I did all of this and my right analog stick instead of drifting to the left now it just goes straight up and doesn’t stop, I can move sideways but not up and down at all it just goes up 😩😭 someone help me please
Change it again… unfortunately most sticks in shops are not work properly 😕
Change it again… unfortunately most sticks in shops are not work properly 😕
Did you ever figure out the problem because I’m currently having this problem as well, and I need a solution
Damn.. next time I will buy duals. edge... freakin drifts...
Thanks for your attention 👍🏻🌟
This controller is an over-designed pos... to spend that much money for something so small to go wrong is a terrible customer service issue - the Xbox controller has the same issue, but accessing the components can be done in about 3 steps without the need to put the entire controller at risk
Thanks for your advice 👍🏻🌸
This required much patience that i dont have...so nah...if i have my ds5 broken,then i just send it for the guy who know how to fix it or i just buy the new one😂
Thanks for participating 🌟❤️😁
My potentiometer is damaged, i cleaned it and it was a pretty good temporary fix. But i think ill order a solder tool and more potentiometers and joysticks. Soldering seems like a usefull skill to have.
Yes exactly… 👍🏻🌟
We should never need to fix this. It's Sony that needs to fix it. Few of us aren't tech minded. Need to fork out for at least £35 to get it fix but aren't garrenteed either . I'm n uk
Thanks for commenting 👍🏻👌🏻
❤❤❤❤❤
Thanks for your attention 🌸🌟❤️
Im just gonna buy a new pad. 😅
👍🏻😁
Nope, I’m not going to do that, I don’t trust myself to not screw it up. Going to just buy a new controller whenever I get stick drift.
Whats to lose if u going to buy a new controller anyway
Thanks for your attention 🌟❤️
I sucked my controller after watching this video
Why😂😂
I am unable to assemble 🙂 properly
I fix them
pls buy soldering iron and flux paste😂😂
Thanks for your advice 😁🌟
Legit solution, horrible execution. If you do that you will definitely destroy one of the vias. The correct method would be either leave the green part on and just change the moving parts, or use solder wick or a solder sucker to remove the solder, in that way the pcb will not be damaged.
Yes exactly 👍🏻🌟
It was quicker to buy new one
Precisely 😁👍🏻
😊😍😊😍
Peggio di così si muore. 🤦🏻♂️🤦🏻♂️🤦🏻♂️
Good fucking lord the piece is hard to get to… if you don’t have the soldering tool, it is practically cheaper to buy a new controller 🤷🏼🤷🏼🤷🏼
Thanks for your advice 🌟🌸
Why don't you just invest in a sucker instead of using a sim card release key. Smh
I just have a Soldering iron 😁😁
Incredible this s**t from sony...50% of dualsense or more with drift...i have 5 dualsense and 4 of them are with this problem
Yes… most ps5 controllers have this problem and it causes after less than 6 months usage…
Worst de soldering I ever seen😂
Thanks for your comment 😁❤️
no offence intended bro you do "anyway" ;)@@DIYVidss
With my friends, 4 controllers, over 1000 hours/years of play, and.....0 drift.
👍🏻😁😁
🤬😡ps5
The Japanese game controllers fall apart in a couple of months. xbox controllers last from generation to generation
Yes exactly… ps5 controllers broken down after a few months 😕😕 specially their sticks.