Fixing a Flat Tire and How to Prevent It
HTML-код
- Опубликовано: 30 июл 2024
- Flat tires happen! It's frustrating but here are some methods I use to help prevent it from occurring. LiquiTube is an amazing product that coats the inside of the tire and can seal punctures up to a half inch! In addition, I also plug the punctures when possible.
#flat
#tires
#ventrac
0:00-Intro
0:30-LiquiTube
2:39-Another Flat!!!
3:44-Raccoon Attack!
5:03-Test Drive
5:47-Tree Just Fell!
6:20-Back To Test Drive
7:46-The Next Day
8:26-Tire Plugs 
Авто/Мото
I have been using Ultraseal tire sealant for about 13 years in my commercial mower tires. They have three grades which can be purchased in 5-gallon containers as well as one-gallon jugs. The price has risen quite a bit lately. I watch for sales on this product.
We should have Project Farm put these tire sealants head to head!
Nice fix Bradley. Back in business!
Yes Sir!
This video really helpful been trying to find a product that works and not bad on the equipment. Thank you for sharing
Glad it was helpful!
For what its worth everything I brought home got tire sealer before it went into service. My zero turn got tire slime and my 1025 got tire sealer before it even showed up. South TX where EVERYTHING has thorns.
I use LiquiTube. It's about 300 bucks for 5 gallons and can seal punctures up to a half inch
Dude you are funny in your videos, I enjoy watching them. How do you like the Fuel Injection Engine? Any more horsepower? Always heard fuel injections give another horsepower.
Thanks, man! My wife doesn't think I'm all that funny, haha! Regarding the engine, my old 4500Z with the SAME Kubota engine but carbeurated and limited to 3,200 RPM was rated at 32.5 HP and 51 TQ. The NEW 4500N with fuel injection is now governed at about 3,600 RPM. It MUST be making more power! I has to be but Ventrac states the same HP. Other than that, I LOVE the fuel injection. No matter the conditions, the computer has her runner her best!
@@bluecordprecisiongrading2504 yeah that's what mine is, 32.5 horsepower 2021 model 4500Z
Hello Bradley, thank you for the awesome content! I just had a loose stud on my hub and had to cut it off. As for getting new one in I’m waiting on my dealer to get it. Couple questions: could I run with just four lug nuts in meantime? I have same bolt size to put in but looks like I have to take hub off to get stud/bolt in? Do you have video on how to do this? I loosened nuts on hub to draw out but the bearing and flange come with it so still not able to get bolt through the back side of hub. Hope that makes sense. Thanks!
What model are you running? It's a real shame that the newer models need the axle shaft pulled to replace lug bolts. I don't see an issue running with 4 for the time being just be careful and get that fixed as soon as you can
@@bluecordprecisiongrading2504 sounds good, and it’s the 4500Z. Much thanks!
Had all eight tires filled w/reseal by the dealer on 4520z. Front outer right tire came off the rim today. Any tips on how to put it back on w/the reseal in it?
P.S. Very cool to see the new EFI 4520n in action :)
I've never tried with the sealant in it. Try using some spoons to remount it
Question... If it will seal a hole up to 1/2 in. how do you get it out of the bucket? lol
It must have to do with a reaction to the outside air. As you can see, the bucket is sealed with a special injector pump
So how does that fuel injected engine compare to the Z?
I think it's awesome and runs great