Would the engine sit too far forward if you mounted the transfer box using factory mount and location. That way you could keep factory prop shafts too.
With the 6L80e transmission and the transfer case adapter I have, that setup is 3 inches longer than the r380 and transfer case combo. So while you could theoretically make that work it would be tighter than I would like up front and being I’m this far into custom on this one I would rather just place it in a more ideal spot for me.
@@LostCauseRanch yes, always keep them clean helps! I always paint the chassis with a marine primer and waxoil and it keeps the rust at bay! We have 3 defenders we use for mooring ships so pulling each ropes and wires so they work in a marine environment and the paint I’ve put on them has worked really well. Galvanising is without a doubt the way to go if you have them apart!
Is there a reason you don’t use the Rw-engineering adapter and mounts available in the states? Just curious because i’m about to order all the bits to do one myself. I like that the Rw-eng one doesn’t change the driveshaft length but is there a negative that I don’t know about?
At the time this one was significantly cheaper than the rw one and we where doing our own mounts and exhaust along with running a different front drive and new driveshafts anyways.
Packaging mainly, not a lot of real estate to run off the shelf headers. Could make some but that is quite the time investment and it will still have more than enough power for this thing with a factory style manifold.
I have done this install on my V5 Rangie Chassis - I would recommend NOT using standard Rangie mounts. They just tend to tear too easy even in a standard V8 Let alone the 6.2
Also I found it easier to use the stock range rover/defender v8 LT230 mounts - fit these first then they will determine the location of the engine mounts.
While i was just joking around with you (nobody wants two of those!). If you know anyone interested, I do have one for sale. Sadly, working from home has made it unnecessary for me to keep mine. While I will shed a tear, I’ll live!
Nice work , really like the way you take time to show how you fabricate the small pieces , nice engine mounts
Thanks, I try to show more of the process while not making it super boring. I’m having fun building this thing.
Nice work!
Appreciate that, it has been a fun one. Hopefully the parts I’ve been waiting on for months finally show so I can get rolling again.
The Defender 90 is coming along nicely Joe & Ted.
Thanks, should keep moving along well now.
@@LostCauseRanch what was the cost of that complete engine and gearbox. Good work bro
Love it Sir, beautiful fabrication................. thankyou
Appreciate that!
Great stuff loving the progress!!
Appreciate that!
What do you guys do with all these LS swapped landies??
Would the engine sit too far forward if you mounted the transfer box using factory mount and location.
That way you could keep factory prop shafts too.
With the 6L80e transmission and the transfer case adapter I have, that setup is 3 inches longer than the r380 and transfer case combo. So while you could theoretically make that work it would be tighter than I would like up front and being I’m this far into custom on this one I would rather just place it in a more ideal spot for me.
a defender with that amount of power is a terrifying thought.
Hi! Can you organize this series in a list on your channel? It's hard to find the videos in the correct order
I think this list should be in order:
ruclips.net/p/PLUB-dRzX_nHhaUjo96ZHYbeAM1NPCP5Yj
Let me know if it’s not.
Well I don’t think it will ever rot mate! I’ve always said it’s such a shame Land Rover never galvanised chassis and body structures!
Yes, definitely the downfall of some of the rovers. There is quite a few around this area that meet their demise because of that.
@@LostCauseRanch yes, always keep them clean helps! I always paint the chassis with a marine primer and waxoil and it keeps the rust at bay!
We have 3 defenders we use for mooring ships so pulling each ropes and wires so they work in a marine environment and the paint I’ve put on them has worked really well.
Galvanising is without a doubt the way to go if you have them apart!
Is there a reason you don’t use the Rw-engineering adapter and mounts available in the states? Just curious because i’m about to order all the bits to do one myself. I like that the Rw-eng one doesn’t change the driveshaft length but is there a negative that I don’t know about?
At the time this one was significantly cheaper than the rw one and we where doing our own mounts and exhaust along with running a different front drive and new driveshafts anyways.
Love it
It has been a fun one to build!
where did you get the transfer box adapter?
Syncro Gearboxes in the UK.
@@LostCauseRanch awesome thank you for thr reply
Man that’s looking sweet! Why cast iron manifolds rather than headers? Nice fab work!
Packaging mainly, not a lot of real estate to run off the shelf headers. Could make some but that is quite the time investment and it will still have more than enough power for this thing with a factory style manifold.
Nice build. Are those engine mounts in the stock location on chassis or were they moved?
Stock location on the chassis. Trying not to modify the chassis at all.
@@LostCauseRanch what about the transfer case mate
I have done this install on my V5 Rangie Chassis - I would recommend NOT using standard Rangie mounts. They just tend to tear too easy even in a standard V8 Let alone the 6.2
Also I found it easier to use the stock range rover/defender v8 LT230 mounts - fit these first then they will determine the location of the engine mounts.
It will rip the transfer box to bits
While this is a fun build, you know what you need…another V10 Touareg.
Still have that guy. It will make it back on here in some fashion in the future after knocking out a couple of the bigger builds.
While i was just joking around with you (nobody wants two of those!). If you know anyone interested, I do have one for sale. Sadly, working from home has made it unnecessary for me to keep mine. While I will shed a tear, I’ll live!