+Metronite Maybe around 5-10hp but I haven't done any Dyno test so I cannot confirm the numbers, what I have noticed is that it revs faster than stock you can reach 3000-4000rpm easily.
I want to get the "MAGNAFLOW 2010-2013 MAZDA 3 STREET SERIES CAT-BACK PERFORMANCE EXHAUST SYSTEM #15127" for my 2011 mazda 3 2.0L Is there anything i need to know?
They all sound that way but it can drag for longer if the battery is going bad makes a even slower crank but for the nost part they all sound like this one in the vid
hey i have a stock mazda 3.... can i install this in there or i need to modify other things as well ? its a automatic tho. but i would like that sound.. ty for the ppl that will reply to me. cheers.
Yes you can install it on a stock Mazda 3. In my case this particular model has 2 cat converters, I just removed the 2nd cat converter and replaced it with a resonator to minimized any raspy sounds or droning.
Try the Magnaflow website before they have video clips on how their products would sound on different vehicles or you can just search in RUclips the exact model and make of the exhaust system for sound reference.
Mark Ridgeway I see this is an old post but for those looking to mod their SKYACTIV Mazda with an aftermarket header... The Gen3 Mazda3 has an OEM header. “Mazda has gone with a true 4-2-1 design (also known as tri-y) with an integrated catalytic converter and what appears to be equal length runners.” “Typically a well-designed 4-2-1 will make more power and torque in the midrange while a well-designed 4-1 will make more power way up at the top of the RPM range. Since normal driving does not involve being at the top of the RPM range all the time, it makes sense that Mazda went with the 4-2-1.” - Corksport. Great engineering went into the SKYACTIV engine design. I personally wouldn’t do much in the header department.
the exhaust sounds great...is yours MagnaFlow part# 16786? and, the K&N SRI, did it throw a CEL code after you installed it? if it did, what do you do to fix it? Thx in advance for any help.
+Jay Sala actually I didn't encounter any CEL code after I have installed it but after 3 months I did encounter a CEL code P0420. What I did to fix it is that I had the engine decarbonized and the O2 sensors cleaned, now no more problems whatsoever.
+Alvin Ron Pablo ... thx for the reply. a CEL after the exhaust? i've never read anything about that, now then, there are numerous posts in forums about getting a CEL after installing a CAI or SRI.
update: i've had my Injen CAI on for about 2 years and have never gotten a CEL...Yay!!! LOL now, the short list of exhausts continues to bewilder me (Corksport, Magnaflow, Borla, HKS).
@@jays3967 that’s sweet as to hear, where abouts did you buy it? i don’t know much about intakes and whatnot but did you just buy a generic one or one made for the mazda?
Pre, ito ba yung ininstall mo sa Mazda 3 mo? Plano ko lagyan yung akin eh. www.tdotperformance.ca/magnaflow-15127-street-series-cat-back-stainless-exhaust-system.html
My magnetic phone stand is in the same spot as your phone stand. I can’t decide which cat back I want to get
beautiful sound, saving to do my exhaust on my 2.0.
Bro I love how this sounds. Nice vide o I love the difference I have a 07 Mazda 3 sedan and would love to do that to my car
What size muffler do you have I have the same car but I don’t wanna order it an it doesn’t fit
Does removing any of the catalytic converters mess up the O2 sensors? Why did you take them away before and after the first cat? I'm confused
Hello, you have photos of your system exhaust
sounds good!
Sólo le cambiaste el silenciador o tmb le abriste la tubería a 3"???
Sounds amazing. What intake is it?
What were your gains after installing the intake and exhaust? Looking into upgrading my '09.
+Metronite Maybe around 5-10hp but I haven't done any Dyno test so I cannot confirm the numbers, what I have noticed is that it revs faster than stock you can reach 3000-4000rpm easily.
Puedes darme informacion del magnaflow y q mas cambiaste para q sonara asi
I want to get the "MAGNAFLOW 2010-2013 MAZDA 3 STREET SERIES CAT-BACK PERFORMANCE EXHAUST SYSTEM #15127" for my 2011 mazda 3 2.0L
Is there anything i need to know?
I love how sounds wanna know how you do it please !!! I have a 06 mazda 3 2.0 !
Jesus Sandoval corksport power series sounds better in my opinion. I have it on my 05 Mazda 3 2.0
That’s a nice exhaust
00:01 that metal grinding noise, what is that? That happens on my 05 hatchback 2.3L too
LgdIKILLU same mine does that my dad said it’s something with the starter but it’s not a problem
They all sound that way but it can drag for longer if the battery is going bad makes a even slower crank but for the nost part they all sound like this one in the vid
Mine does not, its probably the starter, but it should not make any probelms for a long time
Every Mazda 3 sounds like that mine does everyone else’s I hear when they start it does it’s just the starter motor I’m pretty sure
hi brother I want to know what kind of magnaflow did you put in the mazda?
Boss exhaust tip lang ba to? Sorry salamat
hey i have a stock mazda 3.... can i install this in there or i need to modify other things as well ? its a automatic tho. but i would like that sound.. ty for the ppl that will reply to me. cheers.
Yes you can install it on a stock Mazda 3. In my case this particular model has 2 cat converters, I just removed the 2nd cat converter and replaced it with a resonator to minimized any raspy sounds or droning.
Alvin Ron Pablo Dude I have the same model, I was wondering where you bought the 2 cat converters? Mine needs both
@@Deathwish610 just get a cat-back. No need for new cats
HIGHERWØRLDS PRODCTION I need manifold and converter, should I just get the manifold and switch the cat converter for a cat back?
I have an 07 mazda 3 2.0L. Does this go from the cat to the back or is it a full exhaust from the engine back?😅
I ve 2004 mazda 3 and am having problem with number on the drive belt pls i need a solution cos i ve been change too many belt.
saan niyo po idol nabili ganda sa tinga
How much was the exhaust
San kayo nag pa install sir
Does the new exhaust give you better gas mileage
...no.
by removing the 2nd converter what did that do for you? I'm curious? Does that just take away any raspy sounds?
I added a resonator(glasspack muffler) in place of the 2nd Cat, Better air flow and deeper sound i think.
Pre saan mo nabili? Kaka kuha ko lang 07 mazda 3 2.0 gusto ko din ganyan exhaust hehe
Does it fit on a Mazda 3 sedan?
It is fitted on a gen 1 Mazda 3 sedan
What size piping?
why did i bought 2.3 disi when this sound similar with less money :DDD
Is there an online if I want to buy a muffler but I want to know how it sounds before I buy it?
Try the Magnaflow website before they have video clips on how their products would sound on different vehicles or you can just search in RUclips the exact model and make of the exhaust system for sound reference.
👍👍👍
How much po pagawa niyo?
Stainless pipes po ba gamit niyo?
How much was everything aprox.?
+Mehyar Assasah including the installation around $650.
your gonna spend 500.00 for headers and 600.00 fit exhaust. about 200.00 for intake. gains are about 25 to 30.
Mark Ridgeway I see this is an old post but for those looking to mod their SKYACTIV Mazda with an aftermarket header...
The Gen3 Mazda3 has an OEM header. “Mazda has gone with a true 4-2-1 design (also known as tri-y) with an integrated catalytic converter and what appears to be equal length runners.” “Typically a well-designed 4-2-1 will make more power and torque in the midrange while a well-designed 4-1 will make more power way up at the top of the RPM range. Since normal driving does not involve being at the top of the RPM range all the time, it makes sense that Mazda went with the 4-2-1.” - Corksport. Great engineering went into the SKYACTIV engine design. I personally wouldn’t do much in the header department.
@@miked946 old post or not, people still stop by and this helped at least one person! I own a skyactiv version. So, thanks for your reply!
@@miked946 there’s always someone scroll through the comments looking for good information like me
are you driving a standard?
No seems like Manuel mode
No standard wouldnt have the green light on the dash indicating he is in drive
Looks like Philippines :)
correct haha
God damni need to do this
how much did everything cost, including installation
Around 500-600$
Alvin Ron Pablo u did that yourself right cause no way i can see thar being 5 to 600 with labor maybe like 8 to 1000
the exhaust sounds great...is yours MagnaFlow part# 16786?
and, the K&N SRI, did it throw a CEL code after you installed it? if it did, what do you do to fix it?
Thx in advance for any help.
+Jay Sala actually I didn't encounter any CEL code after I have installed it but after 3 months I did encounter a CEL code P0420. What I did to fix it is that I had the engine decarbonized and the O2 sensors cleaned, now no more problems whatsoever.
+Alvin Ron Pablo ... thx for the reply.
a CEL after the exhaust? i've never read anything about that, now then, there are numerous posts in forums about getting a CEL after installing a CAI or SRI.
update: i've had my Injen CAI on for about 2 years and have never gotten a CEL...Yay!!! LOL now, the short list of exhausts continues to bewilder me (Corksport, Magnaflow, Borla, HKS).
@@jays3967 that’s sweet as to hear, where abouts did you buy it? i don’t know much about intakes and whatnot but did you just buy a generic one or one made for the mazda?
@@jays3967 EPIC!! I've just got my base model daily mazda 3 hatch and getting an exhaust asap.
fairview q.c?
Yes
Its great man ! How much did all of this cost ?
What part #?
Hi the part numbesr are in the description
Where'd you get it?
I ordered it online from Amazon.
it is welded.
Just gonna say sounds the same exact same as a muffler delete..
Niiiice.
Send me everything you used for the eaxhauts like parts and what type of muffiler
That is not how you ask for things
Pre, ito ba yung ininstall mo sa Mazda 3 mo? Plano ko lagyan yung akin eh.
www.tdotperformance.ca/magnaflow-15127-street-series-cat-back-stainless-exhaust-system.html
I bought the individual parts online as listed on the description, pina install ko lang sa Mufflerland sila na rin gumawa ng pipping
@@vinpabs Good idea, masmabuti nang pagawa sa experto. Ganun nrin cguro gawin ko. Maraming salamat, pre.
Dumb nice
CUNTO TE COSTO
Lol
talo nyan supra sounds plng
Never understood why people put an exhaust on an automatic...sounds stupid as shit
The part # for the tip is incorrect.