I get the tacticool video effects with the Amazon lights in the background and the pallet wood. But if you’re trying to make an assembly video that’s worth posting, light the table, get a white background and a bright shirt. B+ on keeping it interesting by speeding through, A for actually putting a video out, B- on music, B for a couple close ups, D- on explaining the parts, F on set production. Oh, A for being in English.
I would not tear down this gun by following these instructions. This is very poorly filmed with no closeups of the little parts. I wish they would re-do it and follow your tips for the next one.
Picked mine up last week, Just took it to the range brought 100, 1400 fps 2 3/4 inch target load with me to break it in, Took about 30 rounds to get them to cycle properly, After the 100 rounds i put 1200 fps load in to see if it would shoot and it did indeed shoot flawless after the first 30 rounds, Tried 3 different loads. Did have one malfunction it slam fired not sure exactly what caused it, Other then that great gun. Had a blast after the first 30 rounds.
If you split the receiver and pivot the upper on the front pin, can you see straight through the magazine well? I live in shitty NY and would have to pin the magazine and load it that way. Any help would be appreciated thanks!
How about a video for disassembly of the GF 25. The instructions in the instruction manual for this model leave a lot to be desired, and it doesn’t even come with a wrench for the barrel nut !
Just purchased the GF12AR yesterday 3.27.21. I love it and cant wait to get back to the range. Also, I added a Red Dot Sight and that was also a nice added feature.. Overall, I am very happy with this shotgun and the price was just right... Thank you GForce Arms!!! You Rock!!!
Brought mine out today. Fired flawlessly from the first mag. Outstanding tbh. I also have the cheap pump. These are the two best guns I've owned (so far). Had an old Noble 60 and a mossberg 500 and they outperform both with target load
bought one of these a few days ago. its a GREAT gun dispite what haters think. Im very happy with the performance and price. Only problem i have ( not with the weapon ) but any of my red dot sights wont hold zero very long ( they are cheap..) . So the iron sights work well so i cant complain about them. All in all, its a awesome addition to have for home defence or sport shooting or hunting. Thanks for this product.
@@aharris87 i have a CVLIFE 1X22X33 RDS that dont hold zero, a UUQ Tactical Holographic and 1 other i cant find atm. The RDS that seems to be holding well is the Tacticon Armament Predator V1 Red/Green Veteran Owned.
@Blasphemy Defined Thanks for the info. I've been eyeing and trying to do research on this firearm. Might just have to buy it and figure out as I go. What's the biggest con you have? Maybe available accessories?
@@aharris87 yea the avaliable accessorites is it, but thats not a huge concern of mine being they are comming according to the site. I do wish it had a adjustable stock on it. But all in all i really enjoy it. No problems at all for me.
I got this today. It said it had another magazine with it but I only got the one in the gun. Unconcerned with that. It takes the popular semi auto shotgun magazines I can find used somewhere. I’m more happy that it came with the chokes. Just an inconspicuous cardboard box with GF arms logo on it and the gun wrapped its plastic of course and a case included with two chokes. Got it online for 229$ total. Will break in sometime. Thanks
I picked mine up about 5.months ago just recently emailed them agojust to ask them some questions in the mist of that I ended asking why mine only came with 1 choke and others have said theirs came with 2 extras I wasn't complaining just asking and they ended up sending me the 2 extra chokes in the mail. And that was as recent as this week so it may be worth it to email email and ask about the other magazine.. it's a really fun shotgun so far
I keep hearing that the tool used to loosen the barrel nut should be included with the gun when purchased but I didn't have one when I bought mine. Is there anyway I can buy one separately?
@@alanr4845 I bought the Gf25 I like it lot check out tac 2 weapons for the 2nd amendment 1789 it my other channel got some shooting videos of it and some how to videos coming up soon
Cannot remove the rear pin that lol the upper and lower together. It seems to have some sort of spring clip and it won't budge. I'm afraid that if I keep trying ill damage it
@@GforceArms when I got my ar12 I did not receive one of those tools to push out the rear pins, is that a special tool I need or can I use something ordinary
I have this. But i just want to know how to take it apart juuuust enough to clean it an oil it not completely disassemble it to the point where im trying to see how it was put together bruh.😢
I got one earlier this year. Fantastic firearm and dependable. I bought a 20rd drum-mag for it. I went through a 100 rounds without a FTF. I probably could have kept going but didn't. Bravo GForce!
@ exactly I noticed after I shot it the first time and immediately thought it messed up something . Also if your having trouble with ammo try Winchester expert shot 1450. It is a steel ammo but ran great for an initial break in gonna drop to 1330 brass after today . No jams or misfire gun ran smoothly
@@tyreekhunt8052 its funny i was shooting 1350 winchester buckshot and it was cycling fine and then went up to slug which was 1650 and it starting jamming for some reason
I took It to the range and it wouldn't eject the 2 3/4 target loads I also tried high brass double OO buck and still wouldn't eject. Is there any ideas on the issue or should I try a heavier load?
Is there a disassembly video for the GF00S? That's what mine is and the instructions it came with are for the one in this video which is slightly different
Truly excited to get this gun. Just got it. Hopefully I will not have any cycling issues after I break it in. Only going to use for home defense. ✅ very excited. The gun looks amazing
Bought the gun last week price was decent. It shoot great at the range shoot everything except mini. I'm a Dan now dont let the hater persuasive you otherwise.
Just got it a few days ago and already put 100 rounds through it but when attempting to disassemble it the included wrench tool stripped the noches on the screw so I’m not able to take out the bolt assembly so 6/10 for me
Not sure it matters but heat the barrel nut up with a heat gun and use a vice and take a punch and hammer to each notch until you slowly turn it loose, then apply for a free one with the warrenty
We're working on field gun reviews showing the firearms cycle. Please consider subscribing to be notified when these go live and we thank you for your support and comments.
I got a GF12 AR a few weeks ago. Finally got to put some round thru it this weekend. It shot really well and the recoil was nice and smooth. The only question I have is mine did not come with an extra piston. Should there have been 2 in the box?
Please fill out our service form and we'll get back to you ASAP on this matter. Fill out the ticket just as you've commented here so our service team knows the situation. Thanks for the kind words, we hope to get this resolved for you. www.gforcearms.com/service
A few of these types were on sale this month, of them, i chose this model on the dissassembly. Less tools needed, one model had a piston -o- ring i didnt care for, not saying its a bad thing, but i work on cars for a living and i know how to break and lose small parts like o rings. If you work on fords this probably wont bother you. Looks like a lotta fun, cant wait till it comes in. Anybody know if this comes with chokes?
The choke is Benelli/Beretta style. No more constricted than full choke. M 1919 type magazines. Replace the flip up sights with a quality brand. The gas pistons depend on your loads. Over 1500 fps need the heavy piston according to the people I've talked to. The stock and lower are 1 piece molded. I'd like to see a different front grip with key mod or rail options. And a way to install an adjustable stock. Overall a good weapon. It takes a break in period of getting used to what piston to use with what ammo. Learn your weapon..Learn your ammo..Know your use
I edited my original post. It's a M 1919 magazine. My typo error sorry folks. Most gun sights have 10 round mags. 20 round mags too. And FYI the original 5 round mags you can slide them bottom up on the short rail on the front grip. It is really as simple to tear down as the video. Enjoy your toys boys
I'm trying to figure out if the Barrel is actually treaded to add on a Muzzle or not looks it but unsure, hopefully gonna buy one of these tomorrow????
Good stuff guys! Was able to grab a GF12AR this week and loving every bit of it. Do you guys recommend any companies or brands to swap out the buttstock for an adjustable one? Thank you
Thank you much for the kind words. There are not adjustable buttstocks available for the GF12AR, but we are working on accessories, that being one of them. We will tentatively come out with that sometime in 2021.
Hi thanks for the comment. Yes, you can shoot both 2 ¾” and 3” shells from your shotgun. We do not recommend the use of mini-shells. See our other FAQs here: www.gforcearms.com/faqs
I discovered a trick for those of you with a brand new AR12 that will not cycle without jamming. Just store the gun with the receiver open (locked back) and Max load your magazines. After storing my gun like this for 30 days- it runs (high brass) like a well oiled machine.
Remove the choke tube with the removel tool that is located in the box of choke tubes and install break by hand, I also used a small piece of rubber and chanellock pliers to make sure that it was good and tight
I just bought mine an only have 6 shells through it an it jams every other shot an iv read up that it has problems with the gas system how do I fix this
Hi I cannot get the charging handle to come out of my gforce12 shotgun. The weapon is new, and I am afraid of stripping it. What can I do to get it loose?
@@GforceArms thank you.. but my concern is the little rail section is way up front. it may be too far up for a foregrip. may need it closer to the magazine to be comfortable. What do you think?
how come yall dont have a video to take apart the gf00s the manual on the gun doesn’t even show it ether and cant find it online ether like the gun was erased from the earth
Are your shells getting stuck when ejecting? You appreciate this gun the most if you use shells that have lubricating agents within the raw plastic. STS, AA and Federal Gold Medals. I use those shells only and have 0 cycling problems.
Rifled slugs. We recommend shooting slugs with only a CYL or IMP CYL choke. That gun comes with a MOD choke, so no. The choke system is Benelli Mobil choke compatible.
Can you please do a video on the GFY-1 I got mine the other day and would love to see a breakdown video on it!! Please!! I want to shoot it so bad but I need to clean it first
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I get the tacticool video effects with the Amazon lights in the background and the pallet wood. But if you’re trying to make an assembly video that’s worth posting, light the table, get a white background and a bright shirt. B+ on keeping it interesting by speeding through, A for actually putting a video out, B- on music, B for a couple close ups, D- on explaining the parts, F on set production. Oh, A for being in English.
Well said. Wtf is with the lighting? Why not film in the complete darkness
I agree more closeups more part explanation and most definitely more lighting
Is this gun the same as the GF00? I'm confused?
I would not tear down this gun by following these instructions. This is very poorly filmed with no closeups of the little parts. I wish they would re-do it and follow your tips for the next one.
Exactly. Just bought the GF12 as my first long gun ever, and it looks way more complicated than field stripping and cleaning my P-01!
This is my first gun and am really happy to see a video breaking down the exact gun. Thank you
Thanks for your support and we appreciate your comment. Enjoy!
@@GforceArms i accidently pull out the front takedown pin all the way is there a video on showing how to lock it back in
Is this gun the same as the GF00? I'm confused?
@@jklaws4582have you gotten anymore yet?
Picked mine up last week, Just took it to the range brought 100, 1400 fps 2 3/4 inch target load with me to break it in, Took about 30 rounds to get them to cycle properly, After the 100 rounds i put 1200 fps load in to see if it would shoot and it did indeed shoot flawless after the first 30 rounds, Tried 3 different loads. Did have one malfunction it slam fired not sure exactly what caused it, Other then that great gun. Had a blast after the first 30 rounds.
If you split the receiver and pivot the upper on the front pin, can you see straight through the magazine well? I live in shitty NY and would have to pin the magazine and load it that way. Any help would be appreciated thanks!
How about a video for disassembly of the GF 25.
The instructions in the instruction manual for this model leave a lot to be desired, and it doesn’t even come with a wrench for the barrel nut !
Just purchased the GF12AR yesterday 3.27.21. I love it and cant wait to get back to the range. Also, I added a Red Dot Sight and that was also a nice added feature.. Overall, I am very happy with this shotgun and the price was just right... Thank you GForce Arms!!! You Rock!!!
What red dot did you end up using?
Just picked one of these up and took it to the range. Works great, cycles buckshot and slugs no problem. Looking forward to more aftermarket support
What kind of ammo? I got some 2 3/4 1350fps. Reading so many weird mixed reviews
Did it shoot slugs out of the box or did you have to modify it or anything?
@@dbrown904904mine shoot straight out the box
Is the piston supposed to be able to slide up and down when the spring is cocked? Mine does
Eyeing one of these right now. Seeing a video like this goes a long way to helping me decide to go with this.
Brought mine out today. Fired flawlessly from the first mag. Outstanding tbh. I also have the cheap pump. These are the two best guns I've owned (so far). Had an old Noble 60 and a mossberg 500 and they outperform both with target load
ruclips.net/p/PLZF-jXyFjq8zHMlYTtM0swjrbwT-hj1Mu
This is a moded GF2P 12 gauge pump. The cheap one but I upgraded it for cheap now it's badazz!
Glad to see a video on this guy! Picked it up a few weeks ago and it ran amazing!
Appreciate the comment!!
bought one of these a few days ago. its a GREAT gun dispite what haters think. Im very happy with the performance and price. Only problem i have ( not with the weapon ) but any of my red dot sights wont hold zero very long ( they are cheap..) . So the iron sights work well so i cant complain about them. All in all, its a awesome addition to have for home defence or sport shooting or hunting. Thanks for this product.
Thanks for the honest review!! We appreciate your comment.
What red dots aren't working well?
@@aharris87 i have a CVLIFE 1X22X33 RDS that dont hold zero, a UUQ Tactical Holographic and 1 other i cant find atm. The RDS that seems to be holding well is the Tacticon Armament Predator V1 Red/Green Veteran Owned.
@Blasphemy Defined Thanks for the info. I've been eyeing and trying to do research on this firearm. Might just have to buy it and figure out as I go. What's the biggest con you have? Maybe available accessories?
@@aharris87 yea the avaliable accessorites is it, but thats not a huge concern of mine being they are comming according to the site. I do wish it had a adjustable stock on it. But all in all i really enjoy it. No problems at all for me.
Looks like I'll need to get my PHD for this surgical procedure.
All those tighten up just pft, or do they need to get torqued down
Picking mine up this week! Can’t wait
If you take our the rear pin, and pivot the upper upward on the front pin, can you see through the magazine well Like you would on an ar?
I got this today. It said it had another magazine with it but I only got the one in the gun. Unconcerned with that. It takes the popular semi auto shotgun magazines I can find used somewhere. I’m more happy that it came with the chokes. Just an inconspicuous cardboard box with GF arms logo on it and the gun wrapped its plastic of course and a case included with two chokes. Got it online for 229$ total. Will break in sometime. Thanks
I picked mine up about 5.months ago just recently emailed them agojust to ask them some questions in the mist of that I ended asking why mine only came with 1 choke and others have said theirs came with 2 extras I wasn't complaining just asking and they ended up sending me the 2 extra chokes in the mail. And that was as recent as this week so it may be worth it to email email and ask about the other magazine.. it's a really fun shotgun so far
We need a model GF00 tear down PLEASE!
I keep hearing that the tool used to loosen the barrel nut should be included with the gun when purchased but I didn't have one when I bought mine. Is there anyway I can buy one separately?
Is the gf25 the same
Good question. I dont think it is. Im struggling
@@alanr4845 I bought the Gf25 I like it lot check out tac 2 weapons for the 2nd amendment 1789 it my other channel got some shooting videos of it and some how to videos coming up soon
Cannot remove the rear pin that lol the upper and lower together. It seems to have some sort of spring clip and it won't budge. I'm afraid that if I keep trying ill damage it
I picked one up a few weeks ago, nice shotgun
Thanks for the kind words!!
@@GforceArms when I got my ar12 I did not receive one of those tools to push out the rear pins, is that a special tool I need or can I use something ordinary
@@Ngc-ve7tb The rear pin can be pushed out with a basic punch tool.
@@GforceArms okay thanks guys that's what I figured I haven't messed with it yet have a great day and be safe
I cannot get that barrel cover off. I don't want to go at it with pliers but I may have to. Any hints?
I have this. But i just want to know how to take it apart juuuust enough to clean it an oil it not completely disassemble it to the point where im trying to see how it was put together bruh.😢
I just ordered me one of these bad boys last week! Can’t wait!
Hell yes. Thanks for the comment and the support!!
@lordbeavis69 forsure! I may make a video on it since I see none on this specific gun at all on YT
@@hellasketch6523 pls do🙏🏽
I got one earlier this year. Fantastic firearm and dependable. I bought a 20rd drum-mag for it. I went through a 100 rounds without a FTF. I probably could have kept going but didn't. Bravo GForce!
Can you do a GFY-1 Bullpup video next? I just purchased one last weekend.
We've got it in our pipeline! Stay tuned for it soon. Thanks for the comment and the support!!
That would be great Just bought one also...
Is the GFY-1 a Black Aces fd-12 bullpup clone? They look remarkably alike.
@@tac0008 Not the same, no.
Is it normal for the piston to move freely (Up & Down) if the slide is locked back? I have a GF25
Yes just talked to g force it’s assembled that way
@@tyreekhunt8052 thank you! I felt like it wasnt moving before disassembling. I guess it was one of those thing you dont notice until after
@ exactly I noticed after I shot it the first time and immediately thought it messed up something . Also if your having trouble with ammo try Winchester expert shot 1450. It is a steel ammo but ran great for an initial break in gonna drop to 1330 brass after today . No jams or misfire gun ran smoothly
@@tyreekhunt8052 its funny i was shooting 1350 winchester buckshot and it was cycling fine and then went up to slug which was 1650 and it starting jamming for some reason
So trying to break mine down for cleaning and there is no chance this tool is getting the barrel nut off of mine. The things dam near welded.
I got the GF-25 but the booklet is not right on how to break down the upper from the lower. I still cant do it and even a smith was stumped.
I have a Gf12ar Do I need a tool to get that back take down pin out
please do the GF2P
It's coming soon. Thanks for the support and comment!
Here it is! ruclips.net/video/ri1V1m3brzU/видео.html
@@GforceArms thank you ❤️
Just ordered the GFY-1 today. Can't wait for that sweet looking bullpup to arrive! When will we get the GFY-1 Teardown video?
We're working on it. Please stay tuned and consider subscribing. Thanks for the comment and support!!
This took long enough lol!! I love mine! Let that baby loose last week at the range. I’m a true fan!!!
Glad to hear, thanks for your comment. We're working on more, coming soon!!
@@GforceArms And I’ll be buying! Your pump action is next on my list!
@@tecoshaw2502 Appreciate your support! Would love a review on our Facebook page if you have time to spare. Have a good day!!
@@GforceArms Absolutely!!!
I’m thinking about purchasing one is the butt stock removable or collapse
Got mine today headed to the range in the am
Let us know your thoughts and consider writing us a review on Facebook. Thank you.
I took It to the range and it wouldn't eject the 2 3/4 target loads I also tried high brass double OO buck and still wouldn't eject. Is there any ideas on the issue or should I try a heavier load?
@@teztez6518 We recommend using 1300FPS or higher velocity ammunition.
I will definitely try that out and send my response. I dont have a fb but I will get the review posted in the comment section
@@teztez6518 It's a common issue. We are confident it'll be a much more enjoyable experience. Thanks for the follow-up.
Can we get the gf00 breakdown at some point? It's been out for awhile and you responded months ago you'd have one out shortly.
We had an issue with our specialist, and are having difficulty finding a replacement. We appreciate your patience! :-)
Is there a disassembly video for the GF00S? That's what mine is and the instructions it came with are for the one in this video which is slightly different
The GF00 will have its own teardown video, it'll be out soon. Thanks for your patience.
Truly excited to get this gun. Just got it. Hopefully I will not have any cycling issues after I break it in. Only going to use for home defense. ✅ very excited. The gun looks amazing
Do the gf25 teardown the same way this one
How do you pull out the lower reciever takedown pins?
Do it again and turn the lights on
You should do a video for the GFY-1
We're working on it. Consider subscribing to get a notification when it goes live. Thanks for your comment.
Bought the gun last week price was decent. It shoot great at the range shoot everything except mini. I'm a Dan now dont let the hater persuasive you otherwise.
Fan*
@@SonPham-wl2fu Glad to have you on board, Son. Thanks for the support. We don't recommend the use of mini-shells.
Wow that's a lot to take apart
Hey turn the lights on man,trying to watch the assembly process in the dark!.
Just got it a few days ago and already put 100 rounds through it but when attempting to disassemble it the included wrench tool stripped the noches on the screw so I’m not able to take out the bolt assembly so 6/10 for me
the factory does not recommend you remove it, it is medicated glue
Not sure it matters but heat the barrel nut up with a heat gun and use a vice and take a punch and hammer to each notch until you slowly turn it loose, then apply for a free one with the warrenty
how to install the charge handle?????
Any videos showing this gun in action?
We're working on field gun reviews showing the firearms cycle. Please consider subscribing to be notified when these go live and we thank you for your support and comments.
If you split the receiver and pivot the upper on the front pin, can you see straight through the magazine well?
I got a GF12 AR a few weeks ago. Finally got to put some round thru it this weekend. It shot really well and the recoil was nice and smooth. The only question I have is mine did not come with an extra piston. Should there have been 2 in the box?
Yes mine came with 2 , a lite load and a heavy load piston
Please fill out our service form and we'll get back to you ASAP on this matter. Fill out the ticket just as you've commented here so our service team knows the situation. Thanks for the kind words, we hope to get this resolved for you. www.gforcearms.com/service
@@GforceArms Thanks! Will do!
Yes, I didn’t get a second piston. Just noticed that today when I went back into the box.
@@shootitraw6989 Be sure and fill out the form and we will get back to you about this. Thanks!! www.gforcearms.com/service
A few of these types were on sale this month, of them, i chose this model on the dissassembly. Less tools needed, one model had a piston -o- ring i didnt care for, not saying its a bad thing, but i work on cars for a living and i know how to break and lose small parts like o rings. If you work on fords this probably wont bother you. Looks like a lotta fun, cant wait till it comes in. Anybody know if this comes with chokes?
When can we expect more accessories for the gf00?
Mags drums and grips ect
Aftermarket parts are tentatively releasing in 2021. Thank you for your patience.
What other brands of mags will work with this shotgun?
I have the GFY-1 and Panzer Arms mags fit perfectly.
@@ParadoxZer0 great info
@@ParadoxZer0 How are you enjoying The it? I just bought one a week ago haven’t gotten the chance to hit the range yet...
Hi thanks for the comment! Please refer to our new FAQs section on our website. gforcearms.com/frequently-asked-questions/
The choke is Benelli/Beretta style. No more constricted than full choke. M 1919 type magazines. Replace the flip up sights with a quality brand. The gas pistons depend on your loads. Over 1500 fps need the heavy piston according to the people I've talked to. The stock and lower are 1 piece molded. I'd like to see a different front grip with key mod or rail options. And a way to install an adjustable stock. Overall a good weapon. It takes a break in period of getting used to what piston to use with what ammo. Learn your weapon..Learn your ammo..Know your use
Thank you for your comments and thoughts. Appreciate your honest review. More coming soon, stay tuned.
I edited my original post. It's a M 1919 magazine. My typo error sorry folks. Most gun sights have 10 round mags. 20 round mags too. And FYI the original 5 round mags you can slide them bottom up on the short rail on the front grip. It is really as simple to tear down as the video. Enjoy your toys boys
Need a vid on the gf00s version
It's in the plan!! Thanks for the comment. :)
GF 00 is not the same takedown process. Not sure how to get it open.
Just recently purchased this gun. What tool did you use to loosen the barrel nut at 2:00?
When did this gun come out?
I just got one and this thing it's a fu#&ing monster!
Can I swap out the stock with a different one?
Yes, you take the buttpad off and you can access the bolt to remove it.
@@GforceArms sweet! Thank you for the response!
Why does this weapon's barrel nut have a traditional right-hand thread but the bullpup's has a left-hand thread?
How do I change the stock?
What’s the best ammo to use??
I'm trying to figure out if the Barrel is actually treaded to add on a Muzzle or not looks it but unsure, hopefully gonna buy one of these tomorrow????
Can we install a binary trigger on this ??
Hello, Is the stock removable?
Yes, you take the buttpad off and you can access the bolt to remove it.
I noticed the stock is molded/ all one piece. Would love to see if there is anyway to put an adjustable stock on it.
Good stuff guys! Was able to grab a GF12AR this week and loving every bit of it. Do you guys recommend any companies or brands to swap out the buttstock for an adjustable one? Thank you
Thank you much for the kind words. There are not adjustable buttstocks available for the GF12AR, but we are working on accessories, that being one of them. We will tentatively come out with that sometime in 2021.
@@GforceArms thats a epic fail 😑
They are a new company ,give them a chance
How well does it work? I’m looking at buying one
@@aaronfox5559 it works well lower recoil
Is this gun the same as the GF00? I'm confused?
1. is there any way to add an adjustable stock?
2. Any way to add some rail section under the handgaurd?
We're working hard on developing aftermarket parts for our firearms, not available this moment. We appreciate your interest and patience!
I just picked mine up what after market mags fit for this gun
Our magazine fed shotguns are MKA 1919 magazine compatible.
Does this only shoot 3” shells or will it take 2 3/4 as well?
Hi thanks for the comment. Yes, you can shoot both 2 ¾” and 3” shells from your shotgun. We do not recommend the use of mini-shells. See our other FAQs here: www.gforcearms.com/faqs
Are these compatible with other parts from panzer or rock island? Like drums, stocks, grips ect
Unfortunately, no.
Good video but the lightning could be better
Is this compatible with any other upper?
The barrel nut on mine refuses to loosen up and come off.
Is this a rebranded VR80?
No, the GF12AR is no a rebranded VR80. As with many firearms, they may look similar but there are differences.
working on a Gforce Arms MKX3 video?
Hi thanks for the comment, Tanker. It'll be out soon!! Cheers.
Is the piston supposed to lock in place, or will it slid if you have the bolt locked back?
I discovered a trick for those of you with a brand new AR12 that will not cycle without jamming. Just store the gun with the receiver open (locked back) and Max load your magazines. After storing my gun like this for 30 days- it runs (high brass) like a well oiled machine.
Can you plz do a field review for this also, contemplating on buying.
It's in our queue, thanks for the comment!
Yes Please same Here !
been waiting for this
Glad to hear it, more coming soon!!
is this fun truly reliable? why is it so affordable?
Would I be able to order new vivid pins? Can anyone help me out? Thank you.
Just picked up the MKX-3 today, I bought 2 of them, can you tell me how to install the muzzle break it came with, thanks for the video
Remove the choke tube with the removel tool that is located in the box of choke tubes and install break by hand, I also used a small piece of rubber and chanellock pliers to make sure that it was good and tight
@@solardozer1 thanks brotha, do you have to take the barrel collar off
I can’t get off the barrel nut it’s sooo tight idk what to do
Are the mags proprietary or are they compatible with others on the market. Picking one up tomorrow but you can't have enough mags
Thanks for your comment. You can use other mags, they are specific models but no they are not proprietary.
So what other brands of mags will work in the firearm? I just bought one of these and am looking forward to getting it in.
Is there anything else I can use to loosen the barrel nut? The three prong tool given doesn’t loosen it 🙏
I just bought mine an only have 6 shells through it an it jams every other shot an iv read up that it has problems with the gas system how do I fix this
We recommend using 1300FPS or higher velocity ammunition in our shotguns.
Hi I cannot get the charging handle to come out of my gforce12 shotgun. The weapon is new, and I am afraid of stripping it. What can I do to get it loose?
Can i add a front foregrip to this?
There's a picatinny rail, add whatever you like!
@@GforceArms thank you.. but my concern is the little rail section is way up front. it may be too far up for a foregrip. may need it closer to the magazine to be comfortable. What do you think?
@@paulblart876 We've seen others put a foregrip there. Seems OK. We haven't tried it on our own.
Does the Rock Island mags fit this gun?
MKA1919 magazines will fit this firearm.
@@GforceArms thanks. What capacity mags?
@@MacrossJet All sizes, we've tested it with the ProMag 10, 20 and 50 round magazines.
This gun looks a little littletoo long....it would look so much better if it had shorter barrel..is there aftermarket barrel made for this gun???
Is there one for the gf00 version?
Ikr. So these are two different guns?
how come yall dont have a video to take apart the gf00s the manual on the gun doesn’t even show it ether and cant find it online ether like the gun was erased from the earth
Are your shells getting stuck when ejecting? You appreciate this gun the most if you use shells that have lubricating agents within the raw plastic. STS, AA and Federal Gold Medals. I use those shells only and have 0 cycling problems.
How well do they run using low brass ammo such as clay and field shot? Is there a noticeable change in cycle rate
We recommend using 1300FPS or higher velocity ammunition in our firearms.
Is it bad to keep magazines loaded with shells? will they warp?
A good quality magazine can stay loaded for years and function flawlessly.
Would you shoot sabot slugs or rifled slugs out of this? Also, do slugs shoot fine with the choke that comes with it?
Rifled slugs. We recommend shooting slugs with only a CYL or IMP CYL choke. That gun comes with a MOD choke, so no. The choke system is Benelli Mobil choke compatible.
Can't see a thing with the dark lighting.
Where can I get the magazines from?
Make sure you are subscribed to our email list, announcement soon! Thanks. Email list on our website: gforcearms.com
@@GforceArms just broke mine in & I love it! Shot about 100 rounds of the high brass shells. Now the low brass shells cycle through it perfectly.
Can you please do a video on the GFY-1 I got mine the other day and would love to see a breakdown video on it!! Please!! I want to shoot it so bad but I need to clean it first
It's on its way, thanks for the comment. Please consider subscribing if you aren't already to be in-the-know when it goes live.
I just bought one of these and after 22 shots it won’t fire any shells. Not sure what went wrong with it.
Try cleaning it
Do you need any license to purchase that shotgun?
Refer to your local state/county laws concerning this question. Thanks for the comment.