I had a issue with a BCA 9mm upper. The bolt binded up with the Stern's Defense Glock conversion. When I closed the upper and lower the Glock magazines would not release. I called Stern's and BCA. BCA said thier products work well with the Stern's Defense Glock conversion. Stern's said I should try thier bolt. The tech asked me to measure my bolt. I used my digital calipers and he gave me the tolerances and the BCA was so far out of speck. I just ordered a Stern's Defense bolt and it runs like butter. Sometimes going cheap ends up costing you way more than you expected.
Thank you so much!!! Answered so many questions i had about building an ar9. I researched a lot of places and your short video answered all the important questions to build proper ar 9mm
Love these, quick, to the point, no dicking around, no endless banter, they get right to it, no droning on & on, no unnecessary repetition, no repeating themselves over & over.......😆
Kinda disappointing. I didn't get to use my fast-forward even once. Nothing to skip through, nothing but good, useful information on target for what I was looking for!
I completely agree, no fooling around and trying to be funny, no trying to sell things, just information on what they're presenting, no more, no less, very professional.
I would only add one more thing. When torquing the barrel nut make sure it is aligned as if you were going to place a gas tube, IF NOT and you decide to put a Magpul handguard it will not be aligned properly because it uses the teeth on the barrel nut to do so. I am no expert but had that issue myself. Thank you.
That quickly summarized most of what I learned over a longer period of investigation! Before I was only comparing dedicated 9mm setups, but then I started to consider a conversion.
Thank You I've have learned so much from you guys that's why any time I'm going to do something new with all of my arsenal the first thing I do is go to Brownells and get the low down! Again Thank You. JR
If anyone is looking at this and wondering if they can save money without sacrificing features or reliability, I recently got a faxon 9mm BCG and barrel, an armaspec 9mm stealth recoil spring, and some mean arms endomag conversion kits. I had 0 failures to feed, fire, or eject over about 500 rounds. I know that's not a ton, but that is without any real break in with the parts. I also bought a rise armament blitz trigger as it is PCC rated, and that trigger is fantastic. I would HIGHLY recommend this combo of parts if you want to dip your toes into the PCC segment.
@@clopez84 I didn't, but not because of incompatibility or anything. I ended up going from a side charging upper to another side charging upper, only difference was ejection port size. Same OEM, same basic function. If you already have a 5.56 stripped upper, there is no reason not to use it. That being said, you still need a different barrel and BCG
@@gavingross2174 thank you brother. I will use my spare 556 stripped upper. Def changing bcg barrel and muzzle. My gawd how awful it would be if I didnt. Lol.
I second that. I’m having major issues with my AR-9. I swap between endo mags and colt mags depending on the type of bullet tip I’m running. A lot of failure to feed issues where the round will get stuck slanted half way in the barrel.
badco6354 Great to the point video. there is one other option for the magazines. there is an adapter that goes inside a standard magpul magazine. it replaces the internal spring assembly. i do not have the model or name available but I will add it in another post. this set up is more suitable for a carbine configuration.
This video is 4 years old and the 223 to 9mm magazine conversion kit wasnt available then, or he didnt know about the kits. They make a conversion kit whereby you remove the guts in your 223/5.56 magazine and insert the filler which allows the 223/5.56 magazine to be loaded with 9mm. This is SO MUCH nicer than what he showed in the video. You wont need adjustments on the bottom of mag well each time you go back n forth from using your AR-15 with 223 and 9mm, and you wont have to deal with the other other problems that are common with the conversion he showed. You just load your 223/5.56 magazine with 9mm rounds and shove the mag into your gun
Conversions don't make sense anymore considering PSA and others have dedicated lowers for 225-300. The mag adapters are still 175-200 even after yrs of being on the market plus the reviews are mixed. By the time you buy a barrel and bolt you're only 100 or so away from a dedicated upper. BCA is doing great things with 9mm also including a bufferless system. I'll let them work out the bugs and get a Gen 2 in a couple yrs though!
Am I the only one who noticed when he took the mag adapter out his middle finger found it's way onto the trigger and pulled it dropping the hammer on the lower receiver?
You have to buy the Oden 9 mm bolt that is rated for full auto fire. When buying the 9mm bolt you must read the information details. I found only 1 bolt for full auto fire from Oden. I bought my Oden 9 mm off the company web site. Be prepaid to do some fitting with those magazines and the mag well adapter as I had to do. I know more are some places but where?
I just ordered a handful of endomags and a CMMG Rotationally Delayed Blowback barrel and bolt. I wanted to be able to use any of my AR lowers with that upper and think this will do the trick. Note that the CMMG uses an ejector mounted in the bolt so you either need the endomags designed for CMMG or you need to trim the plastic ejector off the mags. I ordered a few of both types of mags as supply is limited at the moment for CMMG mags and Oregon has BS Mag limits starting tomorrow so I wanted them on hand. I much prefer having the ejector NOT be part of the magazine so you can eject a round from the bolt/chamber with or without a mag inserted (endomags for most applications use the aforementioned plastic ejector on the mag so to unload you have to pull the bolt back w/ mag inserted, lock it with bolt catch then drop mag).
I love your video do you have any videos on the AR 9 mm platform on how it chambers is the actual round going up into the barrel or does it sit in front of it in the chamber
So any Mil Spec AR 15 upper will work on a .45ACP dedicated Lower receiver and run fine? So if i have a dedicated .45ACP lower i dont need the conversion kit and just go to town! Awesome thanks!
@@johnstreitt2474 - I’m a member of two gun clubs and do quite a bit of shooting, building, and reloading - including club PRS matches. Point being, I’ve seen quite a lot on the range. Every pistol caliber AR-type home build that I’ve personally seen has had FFE issues. I’ve seen some that work OK with one brand of ammo and are worthless with another brand - which tells you how finicky the gas systems are. Based on what I’ve seen - I would buy a known pistol caliber PDW and NOT build one. And I’ve built most of my rifles. At least if you buy something like a Kriss Vector then you’re not going to waste hundreds of hours and ammo trying to sort it out, and it will hold a healthy resale value. If AR pistol calibers were so easy, then Daniel Defense, BCM, Noveske, and the other major AR manufacturers would offer them. But most don’t and for good reason. Because frustrated, unhappy customers are what destroys a business. My two cents, YMMV.
@@Liquidrodents oh I wasn't trying to sell any bro...was just curious how many of the conversion mags he was planning on buying i figured they were expensive. And everyone already has glock mags. Sorry for the confusion. Primaryarms just emailed me today they have glock mags in stock as of a few hrs ago
WOW this was REALLY lacking. You didn't mention that some "drop-in" mag blocks need to you remove the bolt catch just to drop them in. These days (at least 2 years now) there is a company that sells a mag insert that holds 30rds of 9mm in a standard P mag. Load up your standard AR mag and GO. So for an AR conversion, swap out complete upper and insert 9mm Pmag.
i bought a hahn conversion block from you folks and im having a terrible time getting it into my ar15 lower from olympic arms you folks have any ideas why its so hard to install i can only get it in about and inch from the bottom and it wont go anymore very tight my lower is fine appreciate any advice
But if you watch the video about them they are expensive and don't work all that well. I have the Hahn adapter, I get Colt SMG pattern magazines from ASC for under $20 and never have issues. They are rugged af.
Zach Morgan you may be right but my preference always will be to have full dedicated guns than interchangeable ones, please. The only exception will be the Micro Roni, so far the coolest thing I ever have which btw doesn’t change anything because it is an adapter where you use the same ammo but with style. Lol 😝
Joshua Bressel I heard you. About the Roni, my Glock17 looks super sexy now that I have installed a Bushnell red dot and the thumb rests along with a 1 point sling. May be later will buy the flashlight. For now just buying parts for next built and will do more AR’s style but will stick with 5.56/223 and 9mm due to ammo costs. I will rather prefer to fired and acquired more accuracy than to have a bunch on different calibers. See you at the range 👊🏻
Does anyone make a reasonably priced 9/10/40/45 pistol upper that doesn't use the AR-style buffer/tube/spring? Considering we've had 3/4" wide 3" 9mm pistols for 20 years.. I'm mystified as to why we don't have a AR upper that doesn't use the buffer tube, which would allow for fire-when-folded braces (or stock as a SBR) What am I missing here? Why no slick-sided self-contained AR pistol uppers??
Bolt has to go somewhere lol. Look at a stribog sp9a1 or a scorpion evo if you want a folding brace with no buffer tube. Also there is the brn 180 ar15ish that doesn't have a buffer tube but I don't know if comes in 9mm.
Brownells has a kit on their website ......... for $900. Might as well buy a cz evo at that point. www.brownells.com/rifle-parts/receiver-parts/caliber-conversion-kits/tavor-sar-9mm-conversion-kit-prod80170.aspx
Colt was making mom ARs back in the late 80's. The DEA used full auto versions and of you need to clear a house the 9mm won't overpenetrate walls like 5.56
So basically just buy a brand new already completed 9mm PCC got it. This is too extra lol plus I like having all completed guns. A few years ago it was worth it to build your own at home but the prices are so insane unless you know CNC milling, 3d printing, etc. it’s more expensive to build one buying all the parts. I’m not talking about just buying a lower and complete upper I mean building it from scratch. Once you gotta replace the barrel if it’s not a Glock it’s time to just get a brand new separate gun.
Especially with a Hiperfire hammer and springs in there.... steel at velocity vs aluminum bolt catch don’t mix well. Plus blowback operated guns are a thing of the past. There’s MUCH more efficient/better designs out there. Even the CMMG delayed blowback system is a massive step forward than just a heavy hunk of metal slamming back and forth with nothing to lock into... Especially if you’re trying to be competitive. Anything short of an actual gas operated or locked breach /delayed system is way behind the curve. A few ounces slamming back and forth makes a massive difference
A 200 dollar magwell adapter is stupid. A modification for a standard magazine makes way more sense, you can use the magazine that is intended for the rifle!
Great stuff, anything to give the law abiding citizen the same chances to survive in this world we live now! Where it seems that criminals and politicians belong to the same club! 😆😅🤣😂
A rifle and pistol that use the same cartridge and magazine is very beneficial. Think lever actions and revolvers back in the old days. Its also cheaper to shoot than 5.56 and 9mm out of a 16" barrel is very effective
Over the years, wstching this gentleman has become like visiting with a wise friend. thx u sir!!
The Mr. Rogers of the gun neighborhood. 😊
I had a issue with a BCA 9mm upper. The bolt binded up with the Stern's Defense Glock conversion. When I closed the upper and lower the Glock magazines would not release. I called Stern's and BCA. BCA said thier products work well with the Stern's Defense Glock conversion. Stern's said I should try thier bolt. The tech asked me to measure my bolt. I used my digital calipers and he gave me the tolerances and the BCA was so far out of speck. I just ordered a Stern's Defense bolt and it runs like butter. Sometimes going cheap ends up costing you way more than you expected.
Man, this guys enthusiasm needs to be idled down a couple notches.
😂😂😂😂
You can't act this reckless around firearms.
Seriously, he's like the Shamwow dudes dad 😂😂😂
@@theanxious billy mays would have sold it better 😢
Thank you so much!!! Answered so many questions i had about building an ar9. I researched a lot of places and your short video answered all the important questions to build proper ar 9mm
Love these, quick, to the point, no dicking around, no endless banter, they get right to it, no droning on & on, no unnecessary repetition, no repeating themselves over & over.......😆
Your awesome lol
No tacticool target practice intro sequence with generic copyright friendly rock playing in the background
Kinda disappointing. I didn't get to use my fast-forward even once. Nothing to skip through, nothing but good, useful information on target for what I was looking for!
So basically the opposite of your comment lol
I completely agree, no fooling around and trying to be funny, no trying to sell things, just information on what they're presenting, no more, no less, very professional.
I would only add one more thing. When torquing the barrel nut make sure it is aligned as if you were going to place a gas tube, IF NOT and you decide to put a Magpul handguard it will not be aligned properly because it uses the teeth on the barrel nut to do so. I am no expert but had that issue myself. Thank you.
That quickly summarized most of what I learned over a longer period of investigation! Before I was only comparing dedicated 9mm setups, but then I started to consider a conversion.
I’d do a 22lr conversion for cheap plinking, but I think I’d just buy a dedicated 9mm pcc if I wanted one.
Thanks for the great info as always.
Clear concise information from a reliable source. Wish the same were true for the evening news.
Thank you.
Brownells is knocking it out of the park. One of the best gun channels period
Absolutely AWESOME video. As Joey Dubbs76 said, no banter, no opinions of who or why or imagonna. Just short, sweet and to the point.
Thank You I've have learned so much from you guys that's why any time I'm going to do something new with all of my arsenal the first thing I do is go to Brownells and get the low down! Again Thank You.
JR
If anyone is looking at this and wondering if they can save money without sacrificing features or reliability, I recently got a faxon 9mm BCG and barrel, an armaspec 9mm stealth recoil spring, and some mean arms endomag conversion kits. I had 0 failures to feed, fire, or eject over about 500 rounds. I know that's not a ton, but that is without any real break in with the parts. I also bought a rise armament blitz trigger as it is PCC rated, and that trigger is fantastic. I would HIGHLY recommend this combo of parts if you want to dip your toes into the PCC segment.
Did you keep the same 556 upper receiver?
@@clopez84 I didn't, but not because of incompatibility or anything. I ended up going from a side charging upper to another side charging upper, only difference was ejection port size. Same OEM, same basic function. If you already have a 5.56 stripped upper, there is no reason not to use it. That being said, you still need a different barrel and BCG
@@gavingross2174 thank you brother. I will use my spare 556 stripped upper. Def changing bcg barrel and muzzle. My gawd how awful it would be if I didnt. Lol.
@@clopez84 like 300 blackout through a 5.56 lol
@@gavingross2174 baaaahahaha. Unfortunately im sure somehwere someone has done this horrible error.
Wow, I thought it was going to be hard and expensive to change over from 223 to 9MM. Now I know what to do. Thank You
9mm AR conversions tend to be quite finnicky, best to buy a dedicated platform. Evo, mp5, ruger pc, etc.
I second that. I’m having major issues with my AR-9. I swap between endo mags and colt mags depending on the type of bullet tip I’m running. A lot of failure to feed issues where the round will get stuck slanted half way in the barrel.
@@DrSnackCake5 endomags suck so there's that
@@jaredfleagle6126 yes they do lol but it somewhat works.
What buffer/spring are you running? Could be bolt bounce. Use a standard carbine spring, and the bolt, and buffer should weigh about 22oz combined.
@@mitchellpatterson1829 not sure how heavy but I’ve put in a heavy one.
Just rcv'd the Hahn, top drop in, looking forward to testing. Ty Brownells
Thank you for the info!
Simple, straight forward, and informative. Thank you!
Great video, nicely produced and straight to the point.
Don't forget to change the barrel!!
I have the traditional blowback bolt n barrel combo. Mine won’t feed the second round. What barrel would work with this?
badco6354
Great to the point video. there is one other option for the magazines. there is an adapter that goes inside a standard magpul magazine. it replaces the internal spring assembly. i do not have the model or name available but I will add it in another post. this set up is more suitable for a carbine configuration.
Nice job dropping the hammer on the bolt catch 👏 👏 👏 lol
That's what I ran to the comments section to read for. LOL
much good advice. concise and to the point. thank you.
Very informative! I could do without the music throughout the whole thing
yes, the music was a little distracting. great info tho, thanks!
@INVICTUS FARMER lol
I wear hearing aides ..I thought it was going to be loud and annoying..it was very mellow
It's part of the charm of Brownells though
This is the channel for Firearm Knowledge..!
Thanks, Steve !!
Thanks! It was helpful!
This video is 4 years old and the 223 to 9mm magazine conversion kit wasnt available then, or he didnt know about the kits. They make a conversion kit whereby you remove the guts in your 223/5.56 magazine and insert the filler which allows the 223/5.56 magazine to be loaded with 9mm. This is SO MUCH nicer than what he showed in the video. You wont need adjustments on the bottom of mag well each time you go back n forth from using your AR-15 with 223 and 9mm, and you wont have to deal with the other other problems that are common with the conversion he showed. You just load your 223/5.56 magazine with 9mm rounds and shove the mag into your gun
No barrel change?
Cool, just what i needed.
THANK YOU FOR ANOTHER VALUABLE INFORMATIVE VIDEO. 😁👍
GREAT video!!
Conversions don't make sense anymore considering PSA and others have dedicated lowers for 225-300. The mag adapters are still 175-200 even after yrs of being on the market plus the reviews are mixed. By the time you buy a barrel and bolt you're only 100 or so away from a dedicated upper. BCA is doing great things with 9mm also including a bufferless system. I'll let them work out the bugs and get a Gen 2 in a couple yrs though!
Cool. Hammer strike on the frame? Tisk tisk.
Likely, we all have done so at one time or another.
Kenneth G Maiden I seriously doubt anything would break
@@broup9137 yeah, but still an AR sin.
Kenneth G Maiden k I don’t deal with bullshit but you’re free to
Do big deal.. its a tool not a show piece. .. ewww you might scratch your rifle. Haha
It's not an AR sin at all. Learn: ruclips.net/video/Ged8GxBCdrA/видео.html
Great video
Great man wish I would like him to work on my new gun.
As soon as I saw he let go the hammer on that lower I came to the comment section just to see what everyone was saying about it lol
Meh, it's not a big deal. ruclips.net/video/Ged8GxBCdrA/видео.html
Am I the only one who noticed when he took the mag adapter out his middle finger found it's way onto the trigger and pulled it dropping the hammer on the lower receiver?
No, and the slight awkwardness right after the loud "click" ....
Thanks for making this video
Colt SMG pattern magazines FTW!
Will this work with my M16 lower, and enable full auto firing when selected?
That would be something we would suggest chatting with our gun gurus on at Brownells.com or calling our gun techs at 800.741.0015.
You have to buy the Oden 9 mm bolt that is rated for full auto fire.
When buying the 9mm bolt you must read the information details.
I found only 1 bolt for full auto fire from Oden.
I bought my Oden 9 mm off the company web site.
Be prepaid to do some fitting with those magazines and the mag well adapter as I had to do.
I know more are some places but where?
Can also use Endomags as a cheaper option to take your gen 2/3 PMAGS.
Very concise, thank you. Everythimg I needed to know.
BSF makes the best Carbon Fiber barrels
Not sure if I want to go with a mag block or a meanarms endomag. I want to swap back and forth from 9mm to 7.62x39.
😑
I just ordered a handful of endomags and a CMMG Rotationally Delayed Blowback barrel and bolt. I wanted to be able to use any of my AR lowers with that upper and think this will do the trick. Note that the CMMG uses an ejector mounted in the bolt so you either need the endomags designed for CMMG or you need to trim the plastic ejector off the mags. I ordered a few of both types of mags as supply is limited at the moment for CMMG mags and Oregon has BS Mag limits starting tomorrow so I wanted them on hand. I much prefer having the ejector NOT be part of the magazine so you can eject a round from the bolt/chamber with or without a mag inserted (endomags for most applications use the aforementioned plastic ejector on the mag so to unload you have to pull the bolt back w/ mag inserted, lock it with bolt catch then drop mag).
Buy a cmmg upper and their Arc9 mag and done.
I love your video do you have any videos on the AR 9 mm platform on how it chambers is the actual round going up into the barrel or does it sit in front of it in the chamber
Can this be used in california on a mag locked Ar-15? I would think not since it has a its own magazine release, thus bypassing the maglock mechanism.
Great video. Drop the music.
Why is there a distracting music score, really loud, while I'm trying to listen to this interesting content? It's a pain.
please make a lot vids
I use the 32 rnd stick mags, with the blowback bcg. Nightmare!!! Won’t feed. Damages the case. Any suggestions?
If you already have one in 5.56, keep it and buy a 9mm AR. Now you have both. Just tell the wife the conversion would cost more.
So any Mil Spec AR 15 upper will work on a .45ACP dedicated Lower receiver and run fine? So if i have a dedicated .45ACP lower i dont need the conversion kit and just go to town! Awesome thanks!
What do you get when you fuse Clint Eastwood with me rogers? This man here
I already have a Glock 9mm lower but I'm looking to build a Colt 9mm AR... will my Glock BCG work with Colt mags?
Did he drop the hammer on the lower? Maybe it’s not as big of a deal as they make it out to be?
Be prepared for problems, cussing, and heartbreak.
So many parts
Can you elaborate on your experiences? Could be helpful. Thanks.
@@johnstreitt2474 - I’m a member of two gun clubs and do quite a bit of shooting, building, and reloading - including club PRS matches. Point being, I’ve seen quite a lot on the range. Every pistol caliber AR-type home build that I’ve personally seen has had FFE issues. I’ve seen some that work OK with one brand of ammo and are worthless with another brand - which tells you how finicky the gas systems are. Based on what I’ve seen - I would buy a known pistol caliber PDW and NOT build one. And I’ve built most of my rifles. At least if you buy something like a Kriss Vector then you’re not going to waste hundreds of hours and ammo trying to sort it out, and it will hold a healthy resale value. If AR pistol calibers were so easy, then Daniel Defense, BCM, Noveske, and the other major AR manufacturers would offer them. But most don’t and for good reason. Because frustrated, unhappy customers are what destroys a business. My two cents, YMMV.
@@petersouthernboy6327 I build ar9s pretty regularly. Not really an issue
@@jaredfleagle6126 - that’s impressive 👍. Are you using a dedicated lower or blocks? Whose BCG?
Great video, anyone know if there's an affordable kit you can buy that has all the part to convert to 9mm
Are you planning to sell the Endomag? I have read and watched several reviews and looks like it’s the cheaper way to convert your AR15 lower in an AR9
How many mags ya gonna buy? I have piles of glock mags.
garym51124 i’m looking for glock mags. Still looking to sell?
@@Liquidrodents oh I wasn't trying to sell any bro...was just curious how many of the conversion mags he was planning on buying i figured they were expensive. And everyone already has glock mags. Sorry for the confusion. Primaryarms just emailed me today they have glock mags in stock as of a few hrs ago
Can you buy a standard complete lower then buy a complete 9mm upper and just install a mag converter?
So going from a 5.56 I’d have to swap the barrel to a 9mm barrel?
Will you need to check headspace on a 9mm AR?
WOW this was REALLY lacking. You didn't mention that some "drop-in" mag blocks need to you remove the bolt catch just to drop them in.
These days (at least 2 years now) there is a company that sells a mag insert that holds 30rds of 9mm in a standard P mag.
Load up your standard AR mag and GO. So for an AR conversion, swap out complete upper and insert 9mm Pmag.
An AR in 9mm ? ? ? GENIUS ! ! ! ! !
Colt sold 9mm ARs many years ago... at Walmart!
How heavy is that primary weapons buffer?
i bought a hahn conversion block from you folks and im having a terrible time getting it into my ar15 lower from olympic arms you folks have any ideas why its so hard to install i can only get it in about and inch from the bottom and it wont go anymore very tight my lower is fine appreciate any advice
now you dont even need to use mag well adapters, they have ar15 converted mags
Dyllon McDonald like CMMG or endo right?
But if you watch the video about them they are expensive and don't work all that well. I have the Hahn adapter, I get Colt SMG pattern magazines from ASC for under $20 and never have issues. They are rugged af.
Do they sell kits I only see uppees
Will hollow points work with a colt adapter?
2:53 did he just drop a hammer on a bare receiver?
DO 9MM BOLTS FOR AR15'S USE THE SAME FIRING PIN AS 556 BOLT?
Will be much better to make a built using a 9mm dedicated lower receiver or AR9
Not really. Using a standard lower is much more versatile and can be converted back to a rifle caliber if you so please
Zach Morgan you may be right but my preference always will be to have full dedicated guns than interchangeable ones, please. The only exception will be the Micro Roni, so far the coolest thing I ever have which btw doesn’t change anything because it is an adapter where you use the same ammo but with style. Lol 😝
Joshua Bressel I heard you. About the Roni, my Glock17 looks super sexy now that I have installed a Bushnell red dot and the thumb rests along with a 1 point sling. May be later will buy the flashlight. For now just buying parts for next built and will do more AR’s style but will stick with 5.56/223 and 9mm due to ammo costs. I will rather prefer to fired and acquired more accuracy than to have a bunch on different calibers. See you at the range 👊🏻
I have 2 ar9s....and im still wanting 1 of these conversions. Thinking sylvan though just to try it out
cmmg make 9mm mag conversation kits for Magpul mags
Wow I would just build or buy a 9mm carbine.
@Joshua Bressel yes all quality parts. Enjoy it bro
Would this work similarly for an AR-10?
How heavy is the buffer have to be?
I think he’s trying to tell me something with his neck
556 over 9mm all day
I don't have any desire to convert my ar to a 9mm. Ill just go with a while new rifle like a kel tech or an mpx.
Does anyone make a reasonably priced 9/10/40/45 pistol upper that doesn't use the AR-style buffer/tube/spring?
Considering we've had 3/4" wide 3" 9mm pistols for 20 years.. I'm mystified as to why we don't have a AR upper that doesn't use the buffer tube, which would allow for fire-when-folded braces (or stock as a SBR)
What am I missing here? Why no slick-sided self-contained AR pistol uppers??
Bolt has to go somewhere lol. Look at a stribog sp9a1 or a scorpion evo if you want a folding brace with no buffer tube. Also there is the brn 180 ar15ish that doesn't have a buffer tube but I don't know if comes in 9mm.
Probably because they have mp5s and ump45s and they don't care about us small fry
@Rocketboyjerry if you can get it to function in a pistol you should be able to make something for the ar, there's plenty of space.
Where can I just buy everything he was talkin about in a kit so I don't have to shop all over the world.
Dollar Tree
floyd forever here my friend
The site has a whole bunch of uppers with kits
karrisguns.com/kg-Raider-9mm-pistol-upper-conversion-endomag-1.html
Brownells has a kit on their website ......... for $900. Might as well buy a cz evo at that point.
www.brownells.com/rifle-parts/receiver-parts/caliber-conversion-kits/tavor-sar-9mm-conversion-kit-prod80170.aspx
Why would you do such a thing to your AR?
Cheaper to shoot?...
Colt was making mom ARs back in the late 80's. The DEA used full auto versions and of you need to clear a house the 9mm won't overpenetrate walls like 5.56
do they have a magazine conversion to use Beretta fs 92 magazine
So basically just buy a brand new already completed 9mm PCC got it. This is too extra lol plus I like having all completed guns. A few years ago it was worth it to build your own at home but the prices are so insane unless you know CNC milling, 3d printing, etc. it’s more expensive to build one buying all the parts. I’m not talking about just buying a lower and complete upper I mean building it from scratch. Once you gotta replace the barrel if it’s not a Glock it’s time to just get a brand new separate gun.
Anyone else cringe when he dropped the hammer on that lower?
Meh
Especially with a Hiperfire hammer and springs in there.... steel at velocity vs aluminum bolt catch don’t mix well. Plus blowback operated guns are a thing of the past. There’s MUCH more efficient/better designs out there. Even the CMMG delayed blowback system is a massive step forward than just a heavy hunk of metal slamming back and forth with nothing to lock into... Especially if you’re trying to be competitive. Anything short of an actual gas operated or locked breach /delayed system is way behind the curve. A few ounces slamming back and forth makes a massive difference
Yep
nah, not really
Nahh
Buy a 9mm. upper and a mag block to accept 9mm. mags.
buffer and spring?
Cool. Thanks.
Would you do one of these for .45 ACP?
I’d like to know if this works as well. I have an AR45 build in the works
Can one still use the 556 upper receiver?
The barrel extension is the same outside diameter. The 5.56/.223 upper will receive a Stoner pattern 9MM barrel.
A 200 dollar magwell adapter is stupid. A modification for a standard magazine makes way more sense, you can use the magazine that is intended for the rifle!
Great stuff, anything to give the law abiding citizen the same chances to survive in this world we live now! Where it seems that criminals and politicians belong to the same club! 😆😅🤣😂
What is the typical cost to convert?
Your soul.
2:55.😂
It doesn't hurt it to do that on an AR: ruclips.net/video/Ged8GxBCdrA/видео.html
Why would someone want to convert to 9mm in a rifle? I don’t understand.
A rifle and pistol that use the same cartridge and magazine is very beneficial. Think lever actions and revolvers back in the old days. Its also cheaper to shoot than 5.56 and 9mm out of a 16" barrel is very effective
Why in the hell would you want to destroy a AR-15?
its cheaper to by a kit & have a AR15 & AR9 than to convert a AR15
Don't let the hammer slap the lower. Lol I saw that. Great info though.
It's not an issue. ruclips.net/video/Ged8GxBCdrA/видео.html
Glock mags are so much cheaper, I don't like that there is no bolt hold open.
too bad you wouldn't donate one of those "mag adapters" to me.
Why are we forced to listen to a guitar? Very annoying. Your information is entertaining enough.
👍👍👍👍