How to Replace CV Axle Shaft 2007-2013 Mini Cooper
HTML-код
- Опубликовано: 21 окт 2024
- Buy Now!
New CV Axle Shaft from 1AAuto.com 1aau.to/ia/1AAC...
This video shows you how to install a cv axle shaft on your 2007-2013 Mini Cooper. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2007 Mini Cooper
2008 Mini Cooper
2009 Mini Cooper
2010 Mini Cooper
2011 Mini Cooper
2012 Mini Cooper
2013 Mini Cooper
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 16mm Socket 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• 22mm Socket 1aau.to/oa/1AXA...
• 32mm Socket 1aau.to/oa/1AAS...
• T50 Socket 1aau.to/oa/1AXA...
• Swivel
• Torque Wrench 1aau.to/oa/1AXA...
• Block of Wood
• Transmission Fluid
• 8mm Allen Wrench
• Brass Punch
• Chisel 1aau.to/oa/1AXA...
• Drain Pan 1aau.to/oa/1AXA...
• Floor Jack 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Jack Stands 1aau.to/oa/1AXA...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Andy from 1A AUTO my man 😎
Great tuitorial thanks. Given me ther confidence and knowledge to do the job.
Then replace the broken exhaust pipe:)
For those with a virgin car, the outermost joint does not simply come out of hub. You will need a “hub puller” but beware the one O’Reillys has for rent does not fit the Mini bolt pattern.
Really hope you're replacing that downpipe too.
Why would my driver side front axle on 2011 mini cooper Countyman be stuck
Make sure to put antiseize on the new splines that go into the hub. You'll thank yourself later...
you have removed the shaft, why top up the fluid in a halfass job, drain it all and replace it.
That driveshaft sure got rusty real fast
Ok i wouldn't get one .. 😂