Now I just need to figure out how to disassemble this as you did and install the return spring, as it did not come attached. Why can't these things be simple? Why can't airsoft designers and product manufacturers make drop-in products that are ready to go? Why can't big names make products that will last so we don't have to upgrade them? Why is all of this so unnecessarily overcomplicated?
Very cool. mI'll probably get one eventually after I finally get my Z-parts trigger working inside the RA-Tech trigger. I think the issue is with the delayer.
Dont buy this unless u want to waist money, ive spent just over $300 in the couple weeks because i decided to buy this thing. Installed it and got it adjusted to the right fps and it did stay fairly consistent ranging between 60fps but after only shooting a couple mags i noticed the nozzle weighs to much for the retracting spring to draw it back at a fast enough rate during cycling and jams a bb right above the nozzle and causes the screw in the guide thats under the roller guide to strip the threading on its hole making the bolt useless. This was also with alot of blue locktight on the screw and ive gone through 2 bolts in the matter of a week and never had this issue before and ive owned the gun for 5 years
Hi RA-Tech, i already have the Aluminium Nozzle for my HK VFC 416D i have had to upgrade the Flute Valve twice so far with the reinforced flute valve upgrade. I think this should make a big difference. do you guys have any plans to bring out a VFC and GHK version. If not then this means nothing to my GBB group of 7 airsofters. We really hope that you guys bring out one for different platforms as you will make many sells. Thanks.
Now I just need to figure out how to disassemble this as you did and install the return spring, as it did not come attached. Why can't these things be simple? Why can't airsoft designers and product manufacturers make drop-in products that are ready to go? Why can't big names make products that will last so we don't have to upgrade them? Why is all of this so unnecessarily overcomplicated?
Very cool. mI'll probably get one eventually after I finally get my Z-parts trigger working inside the RA-Tech trigger. I think the issue is with the delayer.
Guys please make a nozzle like this for the WE AK GBBR!
Any plans to do the same for WA platform ?
Dont buy this unless u want to waist money, ive spent just over $300 in the couple weeks because i decided to buy this thing. Installed it and got it adjusted to the right fps and it did stay fairly consistent ranging between 60fps but after only shooting a couple mags i noticed the nozzle weighs to much for the retracting spring to draw it back at a fast enough rate during cycling and jams a bb right above the nozzle and causes the screw in the guide thats under the roller guide to strip the threading on its hole making the bolt useless. This was also with alot of blue locktight on the screw and ive gone through 2 bolts in the matter of a week and never had this issue before and ive owned the gun for 5 years
I personally swapped the nozzle return spring to a 150% and it works flawlessly.
Do you make one for the smg-8¿
Hi RA-Tech, and to WE G36c, do you have a magnetic locking NPAS too?
G36c is an AR . So its works
Does the pdw version work on older pdw gen3 we tech
Hi RA-Tech, i already have the Aluminium Nozzle for my HK VFC 416D i have had to upgrade the Flute Valve twice so far with the reinforced flute valve upgrade. I think this should make a big difference. do you guys have any plans to bring out a VFC and GHK version. If not then this means nothing to my GBB group of 7 airsofters. We really hope that you guys bring out one for different platforms as you will make many sells. Thanks.
Sorry, this model are advertised as M4 nozzle, are this compatible with the WE GBB msk too?
Brilliant ❤️
But does it fix the BB being warped by the loading arm?
The use of harder BBs helps. I used EMG BBs that would crush in GBBRs but when I tried BLS BBs that never happened and they didn’t warp.
It is ok if using this with standard bolt carrier and standard triger set we m4?
Yes, it's compatible.
I want to believe this is good. But often with ratech their products are lacking. For example this nozzle being full metal could give awful cooldown
for which rifels will it come? this whould be great in my VFC and GHK rifels
This one looks like we m4 gbbr nozzle
Hi, it's for WE AR series.
will this also fit my WE cybergun Deagle?
The deagle uses a m4 nozzle so it should
Looks promising but they didnt actually test it like they usually do.
Cool video :D
Est il compatible avec la G39 WE ?
I want a aluminium bolt ！！！！