sometimes my sc connector doesn't work properly. And my wifi operator told me to spray on the front side of sc connector from any cleaner and reconnect it. This trick works but I didn't find anything on internet is it safe???
Hi there! I'm also a Telecom Technician from Hungary. And you? I work with optical fibers. My apc connectors not always but very often break the fiber after a few hours. So this is how I got here :D maybe that's me who's doing something in the wrong way. But I don't think so. My fibrlocks and the splices I do with fusion splicer never go wrong.. I have no idea what's going on :D
True, but maybe you should learn to read an instrument: It shows -14.6d0Bm = 34.69µW first and with the cable -15.39 dBm = 28.91µW - that's 0.79dB loss..
Is there a better reason using this termination rather than fusion splicing with the pigtail?
That is a nice solution you got there. More enegat than splicing pigtails.
Yeah
You're talking about the OTO? :D
Is the used SC/APC can be reused several times? I understand that there's an optical gel inside it, will it affect its performance over time?
Yes it can be reused
good job
where was the 8 degree surface made? the cleaver can only cut a straight surface
how to uninstall the protective cap?
Thank ❤
Very simple
How I purchase this connector
sometimes my sc connector doesn't work properly. And my wifi operator told me to spray on the front side of sc connector from any cleaner and reconnect it. This trick works but I didn't find anything on internet is it safe???
Ya bro it's safe but after spraying you should blow some air to it so that dust can move from the edge
I'm also work from telecom Very simple for that fiber optical connector
Hi there! I'm also a Telecom Technician from Hungary. And you? I work with optical fibers. My apc connectors not always but very often break the fiber after a few hours. So this is how I got here :D maybe that's me who's doing something in the wrong way. But I don't think so. My fibrlocks and the splices I do with fusion splicer never go wrong.. I have no idea what's going on :D
Love the song :-)
Will this work for multimode cable?
Yes
you need a MM connector.
www.aliexpress.com/store/product/100PCS-box-FTTH-SC-APC-single-mode-fiber-optic-SC-APC-quick-connector-SC-APC-FTTH/3985025_32893571695.html?spm=2114.12010615.8148356.15.41306e18QbH7IU
What is the song name?
-15dbm faible valeur
7db is too much loss!
True, but maybe you should learn to read an instrument: It shows -14.6d0Bm = 34.69µW first and with the cable -15.39 dBm = 28.91µW - that's 0.79dB loss..
@@salat how did you calculate that? 🤔
@@3mariusx C=A-B ? 🤣🤣🤣
@@btudrus and what C B and A represent? 🙄
@@btudrus still waiting for an explanation
That's the most troublesome mechanical connector I've ever seen.
Haven't used it, there is no need to say my product
what would you recommend
@@stevensole4411 a Corning TKT-UNICAM
It is very good connector 🙄
Esa mierda es mal echo marca -15.00 db eso tiene que quedar menos de -10.00 db
7db lose
You should learn to read an instrument: It shows -14.6d0Bm = 34.69µW first and with the cable -15.39 dBm = 28.91µW - that's 0.79dB loss..
@@salat again, how ?
Very simple