Thanks so much for tutorials on Inventor Design Accelerator. Not many books or CAD instructors talk about or teach people how to use the Design Accelerator. I have used Inventors in my works for years but never used the Design Accelerator but will start learning from now.
Thanks a lot, Sir. Really useful in my teaching to my students. Really appreciate your knowledge and your kindness of sharing the knowledge to other. Keep in touch and keep in sharing good things to other..... All the to you from Malaysia.
hi thanks for the tutorial, it gives us so much view about tools that we can use by the way, in my school we have to design a reduction gear (maybe gear ratio 1:30), I just figure a two stages spur gear with 1:5 and 1:6 gear ratio it is just for education that we crank with our hand will give different speed I change the drop-down list (module) to number of teeth, I click 5 in the desire gear ratio then click calculate,but it shows "calculation indicate design failure" should I change the parameter of power? actually, I don't really know about how much power will I deliver to the system with my hand I really want to learn more about this, I don't know what parameter I should change like the number of teeth in small gear and bigger gear,module, unit correction, face width, and so on thank you
Hi Ian and thanks for following my tutorials. Try to use a small value for power (ex. 0.001 kW) and then apply Calculate. Do the same with the first gear presented in the tutorial. Good luck!
@@prof-stancescu hi thank you so much for your reply, but could you give me a suggestion where do I learn if I want to know more about choosing the right specification (number of teeth, unit correction, module,face width)? I think I will confuse in the future if I can't understand that problem or maybe if you have time could you make a video of that?thank you so much
You can activate Design Accelerator / Spur Gear as in the tutorial and then apply Help to find this: help.autodesk.com/view/INVNTOR/2021/ENU/?guid=GUID-3BCB80E6-3328-433B-972D-C92D6CED7674 Find there everything you want.
This tutorial does not have any associated assets - see www.fastgrup.ro/tutorials The only parts are axles which must be modeled as one single one to be used wherever it needs - one instance or more Good luck!
Thanks so much for tutorials on Inventor Design Accelerator. Not many books or CAD instructors talk about or teach people how to use the Design Accelerator. I have used Inventors in my works for years but never used the Design Accelerator but will start learning from now.
Glad you enjoyed it!
Really appreciate your knowledge sharing, sir.
I'm studying engineering and your tutorials are treasure!
Glad you like them!
GREAT WORKING, AND GREAT WAY OF TEACHING SIR. LEARNING AND SEEKING FROM YOU MUCH.
Thanks a lot, Sir. Really useful in my teaching to my students. Really appreciate your knowledge and your kindness of sharing the knowledge to other. Keep in touch and keep in sharing good things to other..... All the to you from Malaysia.
You are most welcome!
These are amazing demonstrations! Thank you!
Glad you like them!
Exactly what i was looking for. Thank you my friend.
Glad I could help
Great tutorials, keep them coming!
Glad you like them!
Thanks for your amazing work Dr
My pleasure
literally awesome !!!!!!
Welcome!
Thank you for sharing this, sir.
Glad to welcome you
hi thanks for the tutorial, it gives us so much view about tools that we can use
by the way, in my school we have to design a reduction gear (maybe gear ratio 1:30), I just figure a two stages spur gear with 1:5 and 1:6 gear ratio
it is just for education that we crank with our hand will give different speed
I change the drop-down list (module) to number of teeth, I click 5 in the desire gear ratio
then click calculate,but it shows "calculation indicate design failure"
should I change the parameter of power?
actually, I don't really know about how much power will I deliver to the system with my hand
I really want to learn more about this, I don't know what parameter I should change like the number of teeth in small gear and bigger gear,module, unit correction, face width, and so on
thank you
Hi Ian and thanks for following my tutorials.
Try to use a small value for power (ex. 0.001 kW) and then apply Calculate.
Do the same with the first gear presented in the tutorial.
Good luck!
@@prof-stancescu hi thank you so much for your reply, but could you give me a suggestion where do I learn if I want to know more about choosing the right specification (number of teeth, unit correction, module,face width)?
I think I will confuse in the future if I can't understand that problem
or maybe if you have time could you make a video of that?thank you so much
You can activate Design Accelerator / Spur Gear as in the tutorial and then apply Help to find this:
help.autodesk.com/view/INVNTOR/2021/ENU/?guid=GUID-3BCB80E6-3328-433B-972D-C92D6CED7674
Find there everything you want.
Fantastic
Thank you so much 😀
Informative package. Thank you for your kindness in teaching us. If possible, please teach us some tutorials on dynamic simulation.🙏
Take a look at TI-044 and 045. I must finish other two tutorials and then I'll try to ad more about all - including DS. Thanks!
@@prof-stancescu is not 143 DA TOTERIAL AT LISTE
Thanks, For your Class.. It is very Interesting
You are welcome!
wow you're magician
Thank you my friend!
great vid
Thank you
Nice impressions
Thanks!
Nicely demonstrated. But where is cam and follower mechanism generator?
Take a look at Tutorial Inventor - 142 DA - DESIGNING A CAM
Kindly if you can share the Mold Design in Inventor too..... tq
Watch my tutorial no. 205 for a Mold Design and be happy my friend...
@@prof-stancescu Thanks a lot Sir
thank you Sir. But I request for the real project case study like a project such as conveyor there are motor listrik and power transmition .
Ok I will try
@@prof-stancescu thank you Sir
@@prof-stancescu i am waiting sr
Hey sir , thank you I want to learn more from you
Always welcome
eline sağlık dayı
eline sağlık dayı - I do not understand, thank you!
I can't find the assets for the power transmission on the link sir. Can you please help me in finding them?
This tutorial does not have any associated assets - see www.fastgrup.ro/tutorials
The only parts are axles which must be modeled as one single one to be used wherever it needs - one instance or more
Good luck!