I have to tell you, I wish I had seen your video before I began learning about dmx. You just covered concisely in 1 video what took me weeks to learn in other videos
Thanks a lot!! There are many awesome videos there already which are to the point. In this video, tried to bridge them with general people, our next vjs, lds! You can suggest your fan or nephew this video as starting point, if they ask u teach ur magic
I like the way you explain most of it but just a teeny tiny correction has to be made: The max value 255 doesn't come from binary, it comes from RGB values. When DMX channels were designed, it was easiest to give everything the same range of values. So where combinations of Red, Green, and Blue were already going to have ranges of 0-255, they also applied it to the movement of lighting fixtures (X, Y, Z). Binary, by contrast, uses powers of 2, (with the exception of 0/Null and 1). So binary counts up 0, 1, 2, 4, 8, 16, and so on. And it uses combinations of those numbers to make every other number. This is why, if you're counting your fingers normally, you can only get 5 from each hand. Because you're counting in Base 10. But if you use Base 2, you can count up to 31 on one hand, or 1,023 on both. Binary counts like: 1 2 2+1 4 4+1 4+2 4+2+1 8 And so on
hello from right opposite site of the world, Bangladesh! i am glad u liked it! check out more videos in this channel. i'm sure u will dig out your jewel within them :)
it depends on your budget and what you are looing for, and finally budget. in Bangladesh, it is possible to buy basic light desks for 3/4k, standard console wud be 30/50k. let me know your budget, i will try to guide. also decide if you're planning for fully hardware based light control system, or PC based
Excellent presentation. Very informative and interesting. My only advice is I would change the very last word from "tomorrow" to either "today" or "first", etc. Thanks.
use transcription if you can't understand english. or this video has Bangla edition on youtube, you can search for this. maybe you will understand that one :) @@mahendrakushwah1496
Sir I have 4port art net controller this connect ma2 on pc software but out put is not coming where I am worng pls help me Thanks in advance Happy Diwali sir
Sir thank you for your comment, to the point. Sadly I personally haven’t using ma2. Next time I meet a fellow brother with ma2 experience , i will bounce your question.
An entertaining and educative tutorial. I really enjoyed your teachings, you are are indeed a great teacher. Kudos to the boss
thanks! pls keep me in your prayers
I have to tell you, I wish I had seen your video before I began learning about dmx. You just covered concisely in 1 video what took me weeks to learn in other videos
Much appreciated
I am currently working as a light designer in a club in Jaipur, but I want to learn more advanced, so you can guide me.
How can I help you?
Amazing Lesson on Stage Lighting.
Fantastic overview! Love the production on this one. Nice work
Thanks a lot!! There are many awesome videos there already which are to the point. In this video, tried to bridge them with general people, our next vjs, lds!
You can suggest your fan or nephew this video as starting point, if they ask u teach ur magic
Sir I want beacom a stage lighting oparator what I have to do explain me sirr plz....
short ans:
a. learn basic
b. get controllers and fixture or find who has them and collaborate with them
c. do it
Waiting for this one 🔥
I want Grandma2 tutorials
Hello sir my name is Kashif I want to ask you how to patch smd screen on dmx
❤❤
@@kashifdass3729 tou will need a dmx decoder that supports your led strip connection
I like the way you explain most of it but just a teeny tiny correction has to be made:
The max value 255 doesn't come from binary, it comes from RGB values. When DMX channels were designed, it was easiest to give everything the same range of values. So where combinations of Red, Green, and Blue were already going to have ranges of 0-255, they also applied it to the movement of lighting fixtures (X, Y, Z).
Binary, by contrast, uses powers of 2, (with the exception of 0/Null and 1). So binary counts up 0, 1, 2, 4, 8, 16, and so on. And it uses combinations of those numbers to make every other number. This is why, if you're counting your fingers normally, you can only get 5 from each hand. Because you're counting in Base 10. But if you use Base 2, you can count up to 31 on one hand, or 1,023 on both.
Binary counts like:
1
2
2+1
4
4+1
4+2
4+2+1
8
And so on
Wow. Thanks for your comment. Yes i was wrong abt calling binary, its more of a bit-byte situation as you said. Much appreciated for your comment
Hey friend! Hello from The States! First vid, Subscribe! You have amazing energy! Thanks for laying everything out. 💥👊🏻💥
hello from right opposite site of the world, Bangladesh! i am glad u liked it! check out more videos in this channel. i'm sure u will dig out your jewel within them :)
Hello sir. Where do you leave cos i want to learn more , i juzt start a lighting hiring company and i need your help thank you
hi, reach me and our community here:
Chat: chat.whatsapp.com/FgHZ1hveWSBAsymEiXfiM6
Please the WhatsApp link is not working
check out this video's description for watsapp link. or you can find my email at the "about" section of this channel@@quameowusu
Kon console use kora thik hobe stage light er janno
it depends on your budget and what you are looing for, and finally budget. in Bangladesh, it is possible to buy basic light desks for 3/4k, standard console wud be 30/50k. let me know your budget, i will try to guide. also decide if you're planning for fully hardware based light control system, or PC based
I went to learning... Stage lightning
Excellent presentation. Very informative and interesting. My only advice is I would change the very last word from "tomorrow" to either "today" or "first", etc. Thanks.
haha thanks for your great words, yes its TODAY!
Number
Reach me for quick tips, Chat: chat.whatsapp.com/FgHZ1hveWSBAsymEiXfiM6
hey! outstanding video! Could you tell me the name of the sotware to program simulators, please. Minuto 8:20 aprox. Thanks for the help!
Hi thanks for your comment. Realizzer, which is now DEPENCE2, Capture, WYSWYG , L8 are few of the popular ones.
Great tutorial 💥💥💥.
Please can you do a video of a controller software with the connecting protocol @03:19
yes, sure! keep an eye on this channel!
Hindi language UJ Sir
why is that?
Hindi language use please
use transcription if you can't understand english. or this video has Bangla edition on youtube, you can search for this. maybe you will understand that one :) @@mahendrakushwah1496
I want to get into dmx production thank you for sharing
You can do it!
Amazing guru
Sir I have 4port art net controller this connect ma2 on pc software but out put is not coming where I am worng pls help me
Thanks in advance
Happy Diwali sir
Sir thank you for your comment, to the point. Sadly I personally haven’t using ma2. Next time I meet a fellow brother with ma2 experience , i will bounce your question.
What kind of controller do you have? You need actual MA Hardware to unlock any parameters.
@@TK-kv6ji Qnet 2048
Hi
Hello