Opel / Vauxhall Corsa D roof antenna removal

Поделиться
HTML-код
  • Опубликовано: 11 сен 2020
  • Opel / Vauxhall Corsa D roof antenna removal.
    Tools needed:
    T20 screwdriver for the interior grab handle
    17mm flexible head ratchet spanner for antenna base nut
  • Авто/МотоАвто/Мото

Комментарии • 24

  • @andreashellwig9863
    @andreashellwig9863 Год назад +3

    Great! Because I have to replace the antenna of my parents' Corsa here in Germany.

  • @glashio
    @glashio 2 года назад +1

    Just replaced my antenna for my Opel Meriva A, Thanx a lot :)

  • @mohammaduddin6990
    @mohammaduddin6990 7 месяцев назад

    Wonderful video, straight to the point, and easy to follow. Thank you. 😊

  • @stefano4017
    @stefano4017 3 года назад +1

    very nice tutorial 👍🏾🔝🥇

  • @Stefan91
    @Stefan91 5 месяцев назад

    Great Video! Thank you from Germany 🎉

  • @fuadkrasniqi3236
    @fuadkrasniqi3236 2 года назад +4

    You sir, is a Hero🤪👏🏻👏🏻 thnx

  • @Zuul88
    @Zuul88 Год назад

    If you have a Navi/GPS you'll have a 3 wire antenna with M6. Replacement parts mostly have M5 and they also might come with bigger securing nuts, not like the M17 shown

  • @mathieudaller3363
    @mathieudaller3363 Год назад

    merci

  • @davidebaccilieri4050
    @davidebaccilieri4050 2 года назад

    if you have an airbag in the lateral plastics, how to takes apart these plastics?

    • @CorsaDForever
      @CorsaDForever  2 года назад +1

      Remove the plastic in the same way, the airbag is attached to the chassis and not reaching that area.

  • @sonicmanic1972
    @sonicmanic1972 10 месяцев назад

    Hi, I ordered a new mount for my Corda D and noticed I need a 22mm spanner. I know you for your vehicle used a 17mm. I wonder can you confirm do you think the hole in the roof will fit a slightly larger thread? All the antenna mounts on ebay have the dimensions as 21.7mm.

    • @CorsaDForever
      @CorsaDForever  10 месяцев назад

      Hi. I don't know. I think the square hole in the roof is the same size for all. Maybe your antenna has only the nut larger and not the hole.

  • @jordanlangley2880
    @jordanlangley2880 3 года назад

    List the tools needed please

    • @CorsaDForever
      @CorsaDForever  3 года назад +3

      T20 screwdriver for the interior grab handle and 17mm flexible head ratchet spanner for antenna base nut
      .

  • @sonicmanic1972
    @sonicmanic1972 11 месяцев назад

    Do you clean the area when you remove the old antenna?

  • @MrArore
    @MrArore 2 года назад

    Where do the antenna cables go to the front?

    • @CorsaDForever
      @CorsaDForever  2 года назад

      I think it goes on the right side of the roof, down on the right pillar to the radio cd.

    • @schatzi1955
      @schatzi1955 2 года назад

      In the Video you look from behind to the Antenna. The Cable goes to the right Side.

  • @cristian-00
    @cristian-00 2 месяца назад

    I should try on my Corsa E, but I've seen that I have the airbags in the lateral pannels. Does anyone have the same doubt?

    • @CorsaDForever
      @CorsaDForever  2 месяца назад +1

      The airbag is not attached to the panel, you can remove it without any problems, but disconnect the battery before that, you start after 30 minutes after disconnection.

    • @cristian-00
      @cristian-00 2 месяца назад

      @@CorsaDForever is this to avoid to enable the airbag?

    • @CorsaDForever
      @CorsaDForever  2 месяца назад

      Yes. Normally, nothing should happen if you don't disconnect the airbag, but for safety it is advisable to disconnect the battery when working near the airbags.

  • @florinsarbu2288
    @florinsarbu2288 4 месяца назад

    Băi baieti nu va mai chinuiti sa desfaceti plafonul ,o garnitura simpla adica inel, fara talpa se poate monta direct pe loc ,bineinteles curatat locul vechii garnituri ,asa am procedat si eu nu intra apa nici la ploaie nici la spalatorie !