Making A Table Saw with Simple Tools - Part 1：The Blade Lift Mechanism ➲
HTML-код
- Опубликовано: 8 фев 2025
- 如果您喜歡我的視頻，請在RUclips上訂閱【Mr.V 被咖啡耽誤的木匠】頻道
打開小鈴鐺通知，第一時間觀看精彩的視頻！
Please subscribe to 【Mr.V 被咖啡耽誤的木匠】Channel on RUclips if you like my videos
Turn on the little bell🔔 notification, the first time to watch wonderful video！
--------------------------------------------------------------------------------
鋸台在工坊裡佔相當重要的位置，少了它很多東西都變的麻煩
這次將GTS-1031拆掉，嘗試著沒有桌鋸的情況下自製
感覺就像回到剛開始玩DIY，真的很有趣😆
但DIY桌鋸還是不建議新手，預算充足下買個專業安全的會比較好唷！！~😉
--------------------------------------------------------------------------------
Part 1：The Blade Lift Mechanism│鋸台升降結構
• Making A Table Saw wit...
Part 2：Trunnions Angle Tilt Mechanism│傾斜角度結構
• Making A Table Saw wit...
Part 3：The Cabinet And Tabletop│落地櫃體及桌面
• Making A Table Saw wit...
Part 4：Wooden Table Saw Fence│桌鋸靠山
• Making A Table Saw wit...
Part 5：Sliding Table Saw Fence│滑軌式推台
• Making A Table Saw wit...
--------------------------------------------------------------------------------
對於影片有任何問題或建議都歡迎底下留言討論！！
Facebook： / mr.v.youtuber
Instagram： / viving0816
Twitter： / vivingwu
Music by Soundtrack for piano animation
/ soundtrack-for-piano-a...
如果您對木作相關有任何問題或建議，歡迎底下留言討論！！
If you have any question or you would like to have a discussion about woodworking process,
please leave a message below.🤓
Part 1：The Blade Lift Mechanism│鋸台升降結構
ruclips.net/video/XEkejMmxzmk/видео.html
Part 2：Trunnions Angle Tilt Mechanism│傾斜角度結構
ruclips.net/video/TayHmeNOWYs/видео.html
Part 3：The Cabinet And Tabletop│落地櫃體及桌面
ruclips.net/video/8JWXYHEqo6Y/видео.html
Part 4：Wooden Table Saw Fence│桌鋸靠山
ruclips.net/video/1t19Do4cG3Y/видео.html
Part 5：Sliding Table Saw Fence│滑軌式推台
ruclips.net/video/v9rp3ln-g2Y/видео.html
Mr.V 被咖啡耽誤的木匠 請問那個博士牌的機器叫做什麼呢？感謝！
@@蒼い衝擊 是GTS-1031，但已停產了，新款的是GTS-10J
影片很不錯哦，有考慮上youtube字幕嗎，國外木友看不懂中文，Chrome瀏覽器可以自動翻譯各國字幕
Yes Mr. v
Hello from the United Kingdom just found your channel and I LOVE your ideas … im wanting to build a table saw and fit my home made CNC into my home garage and still have enough room to park my little 2 seater car in during the cold season.
You are a very clever person and I wish you all of the succsss in the world.
Да, инструменты простые, практически на коленке сделал 😉😁👍
Good job
Thank you
Glad to watch this...but would you share the project plans for us?
Sangat detail hasil maksimal...trims infonya 👍👍🙏
Hey Man - Really Really good work - Very impressed, Do you have Plans ?? I want to give it a go trying to make it ?
Good job. Do you have plan for that.
Could make a rocket to Mars with those tools...
讚喔，大作呢。恭喜突破5000。
大作不敢...謝謝唷👍
我刚自己做了个台锯，升降系统用的是汽车上的千斤顶，手动升降没你电动高大上，不过简单很多。
Olá, muito bom seus trabalhos sou aqui do Brasil amei a elevação da serra, vc poderia me dar as medidas da caixa de elevação? Aguardo resposta!
Great and interesting job. one note though, looks like you are using drywall screw, those screws are brittle and will snap under pressure. to be on safe side, use wood screw. Also you will need to move your zinc bearing to inside, so the weight force from your moving part transfer to the wood panel instead of two screws holding the bearing, vibration will make them loose and the lead screw will fall off.
You gotta make a table saw to make a table saw ;-)
Magnificent!
HI, Good job dude. Can you share the plans? Congrats
Love the design. Could u please post the plans.
good
我也想DIY鉅台了
Te quedó muy bueno, pero creo que el titulo esta equivocado al decir que está hecho con herramientas simples.
Ferramentas simples?
Bravo good sir! Happy new year!
Happy new year！~
Hello
Congratulations for this beautifull job
Is it possible to have /buy the plan ?
Thanks
Jb
x2
Great proyect, nice Job. Do you have PLANS for sale ? Please let me know. What kind of material is the blue top > looks super
Wonderfull job! Please translate to English the small subtitles. Thank tou!
Hi. I like the design of this table saw. I've been looking at different ways of doing this and I like the look of this method. Where do you measure the curve from that the bearing follows when lowering and raising the motor carriage.
Vc usou a serra circular pra fazer a serra de bancada?
你能提供你所展示的材料清單和圖紙嗎？
Really great build! Are there any plans for this? Thank you
❤❤❤❤❤
What was the purpose of building a tablesaw? I guess just to see if you could?
Прекрасная работа. Спасибо за видео!👍 Повторить такое будет сложно 😉
Пр0стblм движeнueм рyk 6рюku npeваращaются, npeвращaются 6pюku...
Привет из России, спасибо за интересные видео.
Thanks very much. glad you're enjoying the videos！😃
請問這樣圓鋸會不會有散熱的問題呢？
Really good work. Can we have a plan ? please
System lifting ia a long time for set up and down
пожалуйста выложи чертежи .....спасибо огромное...знаю ты не жадный ))
新年快樂
太強了
新年快樂😘
Plans
Hello. where can i get or buy a blueprint? I would love to do rendeaen too.
我是台中人，我也喜歡木工。我希望可以跟你交流！
HI~你好喔，台北人👍
剛發現、慢慢閱、讚
謝謝，希望你會喜歡💕
Hello Mr. V,
really a good job, well done.
Could you please share the brand and model of the circular saw?
Thank you very much.
Thank you. I am pleased you like it. Btw, the circular saw i used is from BOSCH GTS-1031
@@mr.v4702 Well noted, thanks a lot for your answer.
It's really excellent. Is it your own design?
Not really, I also refer to “John Heisz” and other’s practice.
Thanks for replying. Looking forward to the tilting mechanism.
@@mr.v4702
Your right but John Heisz didn't make the plan available.
I never fails to astound me that all these videos claiming "make a table saw with simple tools" have a shop with so many tools he surely could afford to just buy a table saw. Want to impress me, make a table saw using a hand saw and a drill.
And he also claims to be coffee shop owner with no experience in carpentry at all :)
@@srikanthpalle1828 This is not the point. He claims to do it with "simple" tools but uses a whole carpententry workshop 🤦♂️
Not only that, but the motor he’s putting in his table saw..... came out of a table saw!
Великолепно! Почему Вы разобрали пилу Bosch, вибрации или другие проблемы ? Новая пила лучше ? Спасибо за видео!
Сам 1031 всегда был слишком маленьким, чтобы им было легко пользоваться, и звук очень громкий, и наклонять его тоже не удобно.
Некоторое время назад, когда взлетали и падали, я хотел изменить тип пола, но просто друг упомянул, что он не рассматривает создание пильного стола в качестве рабочего стола? Я хочу сказать, что если Ю Ци потеряет его, лучше сначала попробовать DIY.
Thats not simple tools used..
There is where people lose likes and subscriptions
I do not see any measurements. And what is the blue material. Are there any plans printed?
The blue material is mdf, colored mdf
請問你拆掉1031的主要原因是什麼? 你覺得他有什麼缺點是你無法接受的? 我也是用1031 覺得他鋸片前的台面太短 很難用 你呢? 這樣改下來 真的是買台落地型比較省事 時間加上材料 覺得不太划算 當然DIY癮發作 就不會考慮這些
當然DIY癮發作阿~~哈😝
但會想DIY的確有些動機的，1031本身一直覺得太小不好用外，聲音也超大，另外也覺得傾斜不太方便。
前陣子升降壞掉，本就想換落地式的，影片拍起來也比較利害的感覺
但剛好木友提到說做了桌面不考慮做鋸台嗎？想說都想換掉了，於其丟掉那不如先試試d一台，就這樣癮發作了。
但還是會換落地鋸台，就再過陣子，租大點工作室時。
@@mr.v4702 我用不到一年 最近開始 上升是還好 下降不是很順 要常潤滑那2根導柱 不然就會抖抖抖的下來。前陣子用他開槽 發現溝深會跑 他的高度沒鎖定裝置 也是我想換的原因之一
好奇搭問
把 bosch gts1031 的馬達移植後
空轉/ 裁切的音量有減少嗎?
有考慮把箱體加上隔音設計嗎?
@@qmolin 比較小一點點而己。
隔音設計可能會，但也可能直接換台落地的~😆😆
@@mr.v4702 換吧 不會後悔的 我已經換了 皮帶傳動噪音差很多 密閉式腳架集塵也比較好 鑄鐵檯面用完要保養一下比較麻煩 不然是會生銹的
是否能公布各木片單元的尺寸
Il manque le couteau diviseurs à l’arrière de lame ?
Il y a le risque que les planches viennent contre le visage !
⛑
😊
RRR R Oui, il y a des produits finis, veuillez voir les derniers ☺️
are you using the motor of a circular saw??? or is it some other kind of motor??? because i`d like to make something like this, and have the 10" blade with riving knife, but i don't know what motor to use
Thank you.the circular saw i used is from BOSCH GTS-1031
how about the dimension, sir???
Двигатель подозрительно похож на двигатель от моей Ryobi которую в ближайшее время ждет такое же превращение. Слишком плохо в станке все с завода, только двигатель хороший.
Simple tools....
Then uses a lathe.. hmmm
又一個木工神人出世，很細緻的製作，只是好奇升降過程有些微晃動感會不會影響結構安全?
這我有注意到，結構箱形和底部固定後就不會晃動了😋
Very difficult to follow the manufacture of the bottom of the table saw. Useless for me.
8:38 what name is it, to search the keywords
👍
Thank you~😋
哇 .你這樣 怎麼買鋸台...^^
其實闆娘已同意讓我買鋸台，只DIY魂發作~😇
下次加上吸塵器，關於木工的影片油管上已經有太多了，創業的時間有點太晚了
嗯嗯~有打算做集塵唷
創業的話我已創業多年了，而拍影片就單純做自己喜歡的木工而己😀
@@mr.v4702 我也喜歡做，可惜沒有空房子當工房，這種廢木頭組合加工充分利用的成就感很棒
Hello. I am looking forward to continuing with your 45 ° tilt. Even though I made a machine everything works fine on it only the 45 ° decision fails. Not centered on the page moves 4-5 cm. and I don't know where I went wrong! Can you help? Thank you for that.
Pencil and tape are simple tools...lol
0:09 я понимаю вас.
哥们威武，你的木工房在哪里？
在台灣台北喔😃
@@mr.v4702 哟，那很近，我的木工房在福建三明大田县
@@靖于野 剛看了一下你的視頻，你的功夫很棒喔
而且....你也太帥了吧，這犯規了😆
@@mr.v4702 那都是PS，真人很一般的。哈哈。你的木作太酷了，好多漂亮实用的辅具，我要好好学学。
Con herramientas simples jajajajajajajajajajajaja
看起來好複雜QQ
嗯..大東西.....這的確比較複雜🥳