100 percent, you can get one of wolverines rails and it goes right over it. Real steel rails should fit but might need spacers and AEG rails are hit or miss.
The size of the contact yoke the IGL goes through may make it difficult to find one with a thick weave that can fit. Honestly not sure if one will. The wolverine IGLs they sell on their site for like 7 bucks
Make sure you put it on semi to change it. The middle setting on the selector (since both are semi) The manual says 5 seconds but I hold it a little longer. That little click is very very quiet. If it dosent change modes I'd contact Wolverine/Heretic labs or the dealer you got it from. The European ones are semi locked.
There is a slight wobble to mine but it's not anything to worry about. It won't throw off accuracy because of how the upper is designed, it does have a very smol amount of play tho
That could be a big reason why. The dwell is how long the nozzle stay "open* with it pressed into the bucking releasing air. It's literally much air is release with each trigger pull. If you don't hear any leaks then I would start with the dwell for sure.
Great job keep it up and they will come.
This thing looks awesome! Is it possible to put on a handguard overtop the outer barrel that it comes with?
100 percent, you can get one of wolverines rails and it goes right over it.
Real steel rails should fit but might need spacers and AEG rails are hit or miss.
Very good video! How do you find the IGL? Did you replace it perhaps with something with weaving? I love how amped Airsoft’s weaved IGLs feel
The size of the contact yoke the IGL goes through may make it difficult to find one with a thick weave that can fit. Honestly not sure if one will. The wolverine IGLs they sell on their site for like 7 bucks
Thank you so much this was so helpful im probably getting one from evike
Glad it was helpful!
What other products are needed for the gun? I may buy one but I am confused what I will need.
Tank, regulator, and line. Do a little resaerch into HPA setups, and you'll find what you're looking got.
Would it help if I made a video?
I don't know of any hpa rifle batteries are there any that you would recommend?
Literally any, 7.4 lipo is what you're looking for
Have you ran this on 1.5j? What psi did you need to do so?
That way above and legal limit for fields near me so I have not even tried to push it that far
What weight bbs were you using during the chrono? 300 with .2s?
There's were .25s I think.
Nobody uses .2s in hpa guns
@@Jurnskii I know. I use .28s in my article 1. Was just curious what you were using to chrono.
So I've tried to do the trigger program and im locked on semi/semi. I'm in the US so I don't have the German version (I hope)
Make sure you put it on semi to change it. The middle setting on the selector (since both are semi)
The manual says 5 seconds but I hold it a little longer. That little click is very very quiet.
If it dosent change modes I'd contact Wolverine/Heretic labs or the dealer you got it from.
The European ones are semi locked.
Hey man! I've just received my Article 1, have you noticed an issue with the upper receiver and lower receiver being wobbly?
There is a slight wobble to mine but it's not anything to worry about. It won't throw off accuracy because of how the upper is designed, it does have a very smol amount of play tho
Does the gun come with the battery if it doesn’t want battery is it?
No it does not. It uses the same fcu battery all HPA rifles use.
Can you make a video on how to tune the trigger please 🙏
Sure np
The wolverine airsoft channel put a really good video on trigger adjustment
How do you put the tracer on it
how to put a tracer on the heretic labs Article 1 @WolverineAirsoft
Could u put the upper on a g&g lower?
Negative the upper is mtw style
If u don’t have hpa what do u need to get for hpa on it
ampedairsoft.com/new-to-hpa-hpa-101/
I just got one and the air efficiency is terrible on it what about you?
Gota to set your dwell right. Also with the shorter barrel you'll need to run it at like 100-110 psi and that could affect it aswell.
@@Jurnskii ight thank you i'll try that i havent done anything to the dwell yet is that why?
That could be a big reason why. The dwell is how long the nozzle stay "open* with it pressed into the bucking releasing air. It's literally much air is release with each trigger pull. If you don't hear any leaks then I would start with the dwell for sure.
@@Jurnskii what fps do yur gun shoot at 100 psi i got mine at 290
if youre using .25s that sounds about right.