Thank you for your review! In case you were unaware of, you could press f2 and set htop to display cpu frequency and temperature (libsensors-dev required).
Hi there, After I unzipped Debian image for my Radxa zero 3w i used belana etcher to image it to my SD card. I also imaged Armbian and that worked too. Double check your micro hdmi adapters good and the input on the screen is good I also read although I'm not 100% sure but I think it will only take a certain sd card size max. I'll have to double check. Also double check you pulled the correct image down. They have md5 hash to verify the integrity so it's not corrupted as well. Let me know how things work out.
@Pi_Boy24 hi, have you got yours working? I am having the same exact issue, none of the images available worked for my 3e, tho they all worked on my 3w.
@@maxjiang1324 Hi Max, I have tried all the images that are available for 3e, but none of them worked, if you have any solution for this please let me know...
@@Pi_Boy24 Sure, I am asking their support on aliexpress, probably there won't be a solution soon, but as soon as we figure out, I am going to let you know!
Hey Laurence! Yeah this new sbc radxa board is a lot better and smoother than the orange pie. Everything in Debian worked nice! It's not meant to be a super fast machine or desktop but I'm surprised at how well it worked. Thanks again!
@@RememberThisTech it's an app that mirrors and controls android devices using android debug bridge adb. I think older zeros can't run it properly because they lack hardware acceleration. I hope the zero 3w can run it though.
@@joehero9 Ahh i see thanks! Well I can't be sure if it can or not but this Radxa runs pretty smooth compared to other zeros I've tried so far. If you get it and try it let me know how it works!
Hey there and tyvm! Are you going to mount the radxa in the boom box? Hook up wifi and stream music out to the radios speakers? That would be a cool project! Let me know how it goes!
Hi there. I've yet to make a video for the radxa and android. But you should be able to flash your micro sd card using belana etcher then boot from the SD card.
Hola José! ¡no hay problema! Me gusta probar y jugar con estas mini computadoras sbc que ejecutan Linux. ¡Siempre me sorprende lo mucho que pueden meter en dispositivos tan pequeños!
Thank you for your review! In case you were unaware of, you could press f2 and set htop to display cpu frequency and temperature (libsensors-dev required).
@maxjiang1324 Hi there, and welcome to the channel! Ahh, great tip, tyvm! Thanks for watching and commenting. I appreciate it :)
How did you installed OS in this... I am having Zero 3e but its not booting up just showing green light...
Hi there, After I unzipped Debian image for my Radxa zero 3w i used belana etcher to image it to my SD card. I also imaged Armbian and that worked too. Double check your micro hdmi adapters good and the input on the screen is good I also read although I'm not 100% sure but I think it will only take a certain sd card size max. I'll have to double check. Also double check you pulled the correct image down. They have md5 hash to verify the integrity so it's not corrupted as well. Let me know how things work out.
@Pi_Boy24 hi, have you got yours working? I am having the same exact issue, none of the images available worked for my 3e, tho they all worked on my 3w.
@@maxjiang1324 Hi Max, I have tried all the images that are available for 3e, but none of them worked, if you have any solution for this please let me know...
@@Pi_Boy24 Sure, I am asking their support on aliexpress, probably there won't be a solution soon, but as soon as we figure out, I am going to let you know!
@@maxjiang1324 i just bought 2 of these 3e just green light no video out?
Hello Jason, it's a vast improvement on the last SBC., which you tried and Debian is a fine distro.
Hey Laurence! Yeah this new sbc radxa board is a lot better and smoother than the orange pie. Everything in Debian worked nice! It's not meant to be a super fast machine or desktop but I'm surprised at how well it worked. Thanks again!
Wow can you run scrcpy on it does it have any issue?
Hi there. I'm not sure, I'm not that familiar with that Android mirror/control program. Perhaps I'll try and test it someday!
@@RememberThisTech it's an app that mirrors and controls android devices using android debug bridge adb. I think older zeros can't run it properly because they lack hardware acceleration. I hope the zero 3w can run it though.
@@joehero9 Ahh i see thanks! Well I can't be sure if it can or not but this Radxa runs pretty smooth compared to other zeros I've tried so far. If you get it and try it let me know how it works!
Using this for an openipc vtx ground station
@@smika710 Hi there. Oh cool!
if you order the version with gpio then the header are fixed ore remoable ?
Hi I'm not sure, I would advise to read the two tech descriptions on the non and gpio versions and double check.
Excellent review. This might work for a boombox I wan to repurpose into an internet radio and media player, maybe with Shortwave, Rhythbox or similar.
Hey there and tyvm! Are you going to mount the radxa in the boom box? Hook up wifi and stream music out to the radios speakers? That would be a cool project! Let me know how it goes!
Thank you for your review. How can I install Android, I will be waiting for your help in this regard.
Hi there. I've yet to make a video for the radxa and android. But you should be able to flash your micro sd card using belana etcher then boot from the SD card.
@@RememberThisTech Android image link ?
I'm not 100% sure they have one officially yet but github might have some that people might have compiled to work with it
Muy interesante , por desgracia no puedo opinar esta vez ya que nunca he usado este tipo de dispositivos.
Hola José! ¡no hay problema! Me gusta probar y jugar con estas mini computadoras sbc que ejecutan Linux. ¡Siempre me sorprende lo mucho que pueden meter en dispositivos tan pequeños!
RDAXA!
sad but unattainable by the looks of it, unless for £100
@Moonrakerd Hi there. Wait do you mean where you live that this would cost 100 pounds? Wow that's just nuts:(
What are you on about? You can easily get this for under 100£
Its pronounced RADZA. NoT RAD AXA/