This is the subtitle content of the video: 00:00-00:06 Hello everyone, today we will introduce how the TQA25 motor works with remote. 00:06-00:42 Firstly, we will introduce how to pair the code with motor. Press [LEARNING CODE] button on motor for 3 seconds, until the motor indicator light goes on. Press the [CHANNEL SETTING] button on the back of the remote until the motor indicator light flashes. And then press [LEARNING CODE] button to confirm. Now the remote can control the motor. 00:42-02:03 Secondly, we will introduce how to set limit of the motor. When we press the [UP/OPEN] button on the remote, the motor can not run continuously. It means there is not a limit on the motor. Press [CHANNEL SETTING] button + [UP/OPEN] button for 4 seconds to set the upper limit. The motor shakes, then Press [CHANNEL SETTING] button to confirm. Press [DOWN/CLOSE] button until the motor runs to the desired position. We use the same method to set the lower limit of the motor. Press [CHANNEL SETTING] + [DOWN/CLOSE] buttons for 4 seconds until the motor shakes. Press [CHANNEL SETTING] button to confirm. It's successful to set the limit. Now when we press the [UP/OPEN] button, the motor can run continuously to the lower limit and stop. 02:03-02:39 In this step, we will introduce how to change direction of the motor. Firstly, press [LEARNING CODE] button for 3 seconds until the motor indicator light goes on. And then press the [CHANNEL SELECTION LEFT] button + [STOP] button. The motor indicator light flashes and then goes off. It's successful to change direction. 02:39-03:16 Next, we will introduce the three favorite positions of the motor. Firstly, we press the [25%] button for 2 seconds and the motor will run to 25% of the limit automatically and then stop. Press [50%] button, the motor will automatically run to 50% of the limit. Press [75%] button, the motor will automatically run to 75% of the limit. When we press the [DOWN/CLOSE] button, the motor runs to 100% position and the blind is completely closed. 03:16-03:58 Next, we will introduce how to delete the limit. Firstly, we press the [UP/OPEN] button and the motor can run continuously. It means there is a limit on motor. Press [CHANNEL SETTING] + [STOP] buttons for 4 seconds to delete the limit. When we press [UP/OPEN] or [DOWN/CLOSE], the motor can not run continuously. It's successful to delete the limit. 03:58-04:38 Last we will introduce how to clear the code of the motor. Firstly, we press [LEARNING CODE] button for 3 seconds until the motor indicator light goes on. Release it and then press [LEARNING CODE] button for 7 seconds until the motor indicator light flashes and then goes off. It's successful to clear the code.
Nesecito en español
En eapañol😅 por Favor
This is the subtitle content of the video:
00:00-00:06
Hello everyone, today we will introduce how the TQA25 motor works with remote.
00:06-00:42
Firstly, we will introduce how to pair the code with motor.
Press [LEARNING CODE] button on motor for 3 seconds, until the motor indicator light goes on.
Press the [CHANNEL SETTING] button on the back of the remote until the motor indicator light flashes.
And then press [LEARNING CODE] button to confirm.
Now the remote can control the motor.
00:42-02:03
Secondly, we will introduce how to set limit of the motor.
When we press the [UP/OPEN] button on the remote, the motor can not run continuously.
It means there is not a limit on the motor.
Press [CHANNEL SETTING] button + [UP/OPEN] button for 4 seconds to set the upper limit.
The motor shakes, then Press [CHANNEL SETTING] button to confirm.
Press [DOWN/CLOSE] button until the motor runs to the desired position.
We use the same method to set the lower limit of the motor.
Press [CHANNEL SETTING] + [DOWN/CLOSE] buttons for 4 seconds until the motor shakes.
Press [CHANNEL SETTING] button to confirm.
It's successful to set the limit.
Now when we press the [UP/OPEN] button, the motor can run continuously to the lower limit and stop.
02:03-02:39
In this step, we will introduce how to change direction of the motor.
Firstly, press [LEARNING CODE] button for 3 seconds until the motor indicator light goes on.
And then press the [CHANNEL SELECTION LEFT] button + [STOP] button.
The motor indicator light flashes and then goes off. It's successful to change direction.
02:39-03:16
Next, we will introduce the three favorite positions of the motor.
Firstly, we press the [25%] button for 2 seconds and the motor will run to 25% of the limit automatically and then stop.
Press [50%] button, the motor will automatically run to 50% of the limit.
Press [75%] button, the motor will automatically run to 75% of the limit.
When we press the [DOWN/CLOSE] button, the motor runs to 100% position and the blind is completely closed.
03:16-03:58
Next, we will introduce how to delete the limit.
Firstly, we press the [UP/OPEN] button and the motor can run continuously.
It means there is a limit on motor.
Press [CHANNEL SETTING] + [STOP] buttons for 4 seconds to delete the limit.
When we press [UP/OPEN] or [DOWN/CLOSE], the motor can not run continuously.
It's successful to delete the limit.
03:58-04:38
Last we will introduce how to clear the code of the motor.
Firstly, we press [LEARNING CODE] button for 3 seconds until the motor indicator light goes on.
Release it and then press [LEARNING CODE] button for 7 seconds until the motor indicator light flashes and then goes off.
It's successful to clear the code.
I hope these contents can help you and wish you a happy day. 🙂🙂🙂Thank you~🥰🥰🥰