I said it on Reddit, I really like the verity you put on your channel. Put out stuff you like and are passionate about comes out to us. Not faked hype for the views.
One of the best rc vids I've seen. Done oval rc racing back in late to early 90s watching this makes think am a dinosaur but makes this older be guy to try the straight line very nice video
Love it I have a Dr10 I'm messing around with. Appreciate that you like to help and put out good advice in what direction to try to get better faster. It helps when you don't know were to start.
A lot of ppl will find a decent set up and try to act like its some top secret cia file thats only available to those with a clearance level high enough that they could walk into "area 51" like they owned it. Thats really decent of you to show yours.
My Rlaarlo 917 recently hit 87mph with Perfect Pass and a few upgrades. Wider foam tires, Up geared pinion and spur, Dumbo RC receiver, Perfect Pass module, 3S 100 C battery.
What size shaft. I have a 4.5 turn hole shot that was in a new drag car build I bought, and the motor shaft wobbles. I've read and been told bent shaft, bad bearings. I'm exchanging emails with rotor Ron, but he says it couldn't of left his shop that way. I'm just trying to run the car, and even offered to pay for him to fix it, or sell me the parts as I've never had one of these before. Are these motors worth the money?
What do you think of the traxxas telemetry expander with gps vs the gnss analyzer I have both. I'm new at all this so when I bought my drag slash I also bought the telemetry expander 2.0 with gps then I upgraded the motor and ESC and the guy at shop thought the telemetry/gps wouldn't work but it will. I left it off and installed the gnss. I just ordered 10 Guage wire will that be ok or should I get the 8. I have a motiv launch pro 2.5t with a rx8 gen3. Thanks for any help. Keep up the great content brother
I'm trying to figure how you achieved this with no weight up front . Or did I miss something? I running one in a 5700 class and ran a 2.3 on the tree. But I have some weight up front.
Just so everyone knows that Skyfly remote takes EIGHT (8) AA batteries and is one hungry, hungry hippo. They can be modded for lipo however. Nice set up btw.
Nice Video Jack congrats on that new PB. That drag slash is ready for some cash days. Running pretty consistently down track. Let's get my dr10 dailed in
I have blue dot reactions, 38 tooth pinion, everything else is stock and we can’t get faster than 2.70. What can I do that stays within boxstock rules. Can’t change electronics or remote. My 8 year is the racer and I’m catching hell getting him to where he can compete with the grown folks. Everyone else is running 2.3-2.5
Cool video hey I’m new to this working on my drag car useing the new bandit rtr chassis, I have the spectrum brushless sensor motor 400kv what gear and spur gear should I use to get 80mph on plus keep it straight
Jack, why didn't you use 2.5 turn instead 4 turn? I heard some people 4 turn was a better motor, if you bought a4 turn you could just easily bought anything you wanted so is it true about the 4 turns being a better motor? You did an amazing job with a stock chassis rear motor car. I'm going to build one and just be proud to have even if it ran 50mph. Thank you for your time I'm honored !
I got drag slash with drk and trinity 4.0 I can’t get passed 2.50-2.60 59-62mph What shocks and springs are you running? Nice run man very impressive 👍
That's the combo I want except not Trinity but 4.0 are less. And I'm not saying Trinity is a bad motor, I really don't know. But I do know you combo should be good for at least 70mph. Man there are so many variables no one can probably tell you what you needing, I'm sure you tried all combo of pinions & spurs if your even running one, what tires, did you balance the car . To me it sound like you on to something you have to find the sweet spot in the DRK a d be rockin that thing with a nuclear reactor of a battery, you have high powered stuff it has to be fed, lots of current, consider a big cap pack all that Matters !
@@JackCecil Seriously Jack! I'm impressed with your tenacity to excel at this hobby, and promote the Traxxas platform. I currently have 2 of these models on back order, and look forward to their arrival. I will appreciate each of them for Traxxas's claims of performance. Look I get it, you're awesome with a GoPro, and awesome with your knowledge of RC drag racing. But there really isn't much stock about this build. Please stop misleading people for your own fame and glory, it's just not gonna work out for you. Don
The ESC advances timing in the software. But i think if i clocked it for tq i wouldn’t get the top end without gearing up more. Which kind of defeats the purpose. But who knows! Just need to test it!
You have 1 more upgrade to do before tire sauce. Get ceramic bearings for tans case and wheel hubs. Check out rc speed secrets. They are great bearings and you will notice a difference. Otherwise great progress on this car Jack. Keep up the great videos.
Just like the threaded rear shock bodies, I'm sure there might be other details he forgot to mention. If I had the money in this so called stock Slash he has, I'd throw mine away! But Wow, 70 mph, Nice!!
@CycleCruza is looking into the new SurOn hit him up he’s a RUclips r you guys should collaborate I don’t know if you still deal with SurOn but you have Ducati and he’s a moto vloger
2:07 the fact that nprc tuning has developed so much since the point of you publishing this video to now where people are pulling the same eta w a vxl is system amazing
Kindly I use the same type of gns but after some time using it I realised that it is not giving the proper readings in my opinion. The faster the car goes the more inaccurate it is. First of all the gns stop reading or calculating before the end of the run so it doesn't calculate the top speed at the end of the run! Secondly the time elapsed to cover the 132ft or 40m it is also not accurate and I think that also not all apparatus are calibrated the same because everyone use his gns and some get better results and when we race together with same cars, the cars with the slow readings overtake the other cars with the better time results. I use to use it to see if I made some improvements but I do not think that it is accurate. I gathered some results and test that I done comparing it with the esc data log, I came to my own conclusion that it could be misleading! This is all my opinion and I could be wrong and stand to be corrected.
@@JackCecil cool Jack, I didn't mean to sound pushy, it's my lack of keyboard skills sometimes I must come across like a right tit! 🤣. Love the rc content it takes me back to when I had loads of rc. big kids aren't we jack, im never gonna grow up!! 👊✊💥💨💨💨😉 NICE 🦢 BROTHER 😉👍
Great video, slick car. BUT those MAXX AMP batteries are the absolute worst packs around. Pls do some research. SMC if you don't wanna read up. Good luck!
I said it on Reddit, I really like the verity you put on your channel. Put out stuff you like and are passionate about comes out to us. Not faked hype for the views.
I really appreciate that. Thank you!
I agree
One of the best rc vids I've seen. Done oval rc racing back in late to early 90s watching this makes think am a dinosaur but makes this older be guy to try the straight line very nice video
Love it I have a Dr10 I'm messing around with. Appreciate that you like to help and put out good advice in what direction to try to get better faster. It helps when you don't know were to start.
I’m always down to help!
A lot of ppl will find a decent set up and try to act like its some top secret cia file thats only available to those with a clearance level high enough that they could walk into "area 51" like they owned it. Thats really decent of you to show yours.
My Rlaarlo 917 recently hit 87mph with Perfect Pass and a few upgrades. Wider foam tires, Up geared pinion and spur, Dumbo RC receiver, Perfect Pass module, 3S 100 C battery.
Awesome build. What are the part numbers for the rear shocks that you have for the drag slash in this video?
Great question! and what an observant eye.
I have a 4wd slash with the 6s MMX system and all the goodies stock lcg chassis. Gtr shocks and so on. Ran 1.7 when I gave it away
Yea 4wd and 6s is pretty crazy. This is rwd and 2s.
I have the Losi drag Chevelle and a 2030 Team Associated 7400 KV motor and esc combo coming! Should see speeds close to that with this combo!
Really nice build. I'm itching to get into this
Where did you get that body from??
what does your tune on the Maclan look like?
Wow man that's quite a lick you put down on a stock slash platform. How high is that chassis off the ground? Also did you limit the shocks?
What size shaft. I have a 4.5 turn hole shot that was in a new drag car build I bought, and the motor shaft wobbles. I've read and been told bent shaft, bad bearings. I'm exchanging emails with rotor Ron, but he says it couldn't of left his shop that way. I'm just trying to run the car, and even offered to pay for him to fix it, or sell me the parts as I've never had one of these before. Are these motors worth the money?
What do you think of the traxxas telemetry expander with gps vs the gnss analyzer I have both. I'm new at all this so when I bought my drag slash I also bought the telemetry expander 2.0 with gps then I upgraded the motor and ESC and the guy at shop thought the telemetry/gps wouldn't work but it will. I left it off and installed the gnss. I just ordered 10 Guage wire will that be ok or should I get the 8. I have a motiv launch pro 2.5t with a rx8 gen3. Thanks for any help. Keep up the great content brother
I'm trying to figure how you achieved this with no weight up front . Or did I miss something? I running one in a 5700 class and ran a 2.3 on the tree. But I have some weight up front.
Just so everyone knows that Skyfly remote takes EIGHT (8) AA batteries and is one hungry, hungry hippo. They can be modded for lipo however. Nice set up btw.
Nice Video Jack congrats on that new PB. That drag slash is ready for some cash days. Running pretty consistently down track. Let's get my dr10 dailed in
Yea man! You’re up next!
did your GNSS work with your iphone right out of the box? Been having trouble getting connection with the satellites
Bring it back we need a update on it
Was it mostly with the change of battery because your car is a rocket
How long does a set of rear tires last? I just bought my first drag car and once I learn how to drive it, I am gonna try No Prep racing,
Congrats dude. I'll probably have the same reaction when I finally hit it.
Where did you get that body, and can that body fit on a regular stock 2wd slash without modification?
I have blue dot reactions, 38 tooth pinion, everything else is stock and we can’t get faster than 2.70. What can I do that stays within boxstock rules. Can’t change electronics or remote. My 8 year is the racer and I’m catching hell getting him to where he can compete with the grown folks. Everyone else is running 2.3-2.5
Did you put out a video for the setup with that noble?
Cool video hey I’m new to this working on my drag car useing the new bandit rtr chassis, I have the spectrum brushless sensor motor 400kv what gear and spur gear should I use to get 80mph on plus keep it straight
Nice my dude!! Congratulations I know the feeling. Good vids keep them coming!
Thanks!
Was wondering where you got that drag body from and what do i look up for that style of body thanks
Well.. you've legit smoked anything I'm running lol need an elco body on the drag slash. Congrats on reaching your goal!
Hell yea
They don't appear to be stock!
Wish you lived near the rest of our rc guys you rock and I see your dedication
WHATS UP JACK CECIL DO YO RECOMEND THE FLY SKY NOBLE NB4 OVER THE FUTABA 4PM TRANSMITTER
What motor and esc ?
And what size pinion and spur gears are you using please
Great video good job
He says it in the video
What all products are needed to use the app to get the speed of the car?
What is the data logger?
May I ask gears for dry tire
so the only stock parts are the chassis and susp? the rest is fully modded out
Congratulations my friend good info love your channel love all you content 💪👍🔥
What shocks are you running on your Slash there ?
What app is that?
What app is this too see speed
What is your ride height ? Did you scale the car ? Thanks
I haven't seen transmitter range that bad in a long time.
Great run tho!
What body is that and will it fit a ae dr10 ?
what kind of shocks in the rear?
Does this mess with the TSM ?
Nice pass man! Did u have to do any mods to the stock slash to run this body?
decent bro, good job. i got the same controller, what did you do with your settings on it? if you dont mind me asking.
Just curious , what brand gyro are you running?
Out of curiosity what is your pinion and spur gear size if I could ask
It’s in the video ?
Jack, why didn't you use 2.5 turn instead 4 turn? I heard some people 4 turn was a better motor, if you bought a4 turn you could just easily bought anything you wanted so is it true about the 4 turns being a better motor? You did an amazing job with a stock chassis rear motor car. I'm going to build one and just be proud to have even if it ran 50mph. Thank you for your time I'm honored !
When are you gonna take it to some events? I'm sure that car is more then competitive enough.
Maybe if i get some free time. I barely get to take it out for testing as it is.
I got the same radio still learning how to tune from it.
Jack, what is the make of the gyro you are using. I am new to you videos and think they are great!
It’s on Amazon.
I got drag slash with drk and trinity 4.0
I can’t get passed 2.50-2.60 59-62mph
What shocks and springs are you running?
Nice run man very impressive 👍
Stock
That's the combo I want except not Trinity but 4.0 are less. And I'm not saying Trinity is a bad motor, I really don't know. But I do know you combo should be good for at least 70mph. Man there are so many variables no one can probably tell you what you needing, I'm sure you tried all combo of pinions & spurs if your even running one, what tires, did you balance the car . To me it sound like you on to something you have to find the sweet spot in the DRK a d be rockin that thing with a nuclear reactor of a battery, you have high powered stuff it has to be fed, lots of current, consider a big cap pack all that Matters !
I use the same shocks he does on both of my drag cars, they work !
@@JackCecil Seriously Jack! I'm impressed with your tenacity to excel at this hobby, and promote the Traxxas platform. I currently have 2 of these models on back order, and look forward to their arrival. I will appreciate each of them for Traxxas's
claims of performance.
Look I get it, you're awesome with a GoPro, and awesome with your knowledge of RC drag racing. But there really isn't much stock about this build. Please stop misleading people for your own fame and glory, it's just not gonna work out for you.
Don
@@Starkster50 I ordered 2 of these, I hope both of mine show up with rear threaded shock bodies like in the video!
What is the name of the app
Asome can you Show your drk settings Nice day
What body is that called i cant find it online
Awesome set up
I’m hoping for a 70 mph run too. Haven’t been able to make a single pass yet due to rain. Badass video dude!
Is it 3s
looks like you can clock that motor as well for more rpm or torque
The ESC advances timing in the software. But i think if i clocked it for tq i wouldn’t get the top end without gearing up more. Which kind of defeats the purpose. But who knows! Just need to test it!
Good point test and tune i guess
What gearing are you running?
What body that
Love jack do more rc drag things
Oh snap! Jack's into NPRC? Old school FSS /JDMS/SK guy here.
You have 1 more upgrade to do before tire sauce. Get ceramic bearings for tans case and wheel hubs. Check out rc speed secrets. They are great bearings and you will notice a difference. Otherwise great progress on this car Jack. Keep up the great videos.
Just like the threaded rear shock bodies, I'm sure there might be other details he forgot to mention. If I had the money in this so called stock Slash he has, I'd throw mine away! But Wow, 70 mph, Nice!!
Would you sell your stock esc/ motor or a motor?
Congrats on 70!
This video is awesome, however it doesn't represent the authors claims of being a stock Traxxas model.
what did u use to extend rear body posts back? and does that body work with stock slash arms all around?
What state are you. Located?
Florida
@@JackCecil I may build a drag car I’ll hit u up for what’s a good way to go and perhaps you can tune for me $$
haha love that your an rc guy too
@CycleCruza is looking into the new SurOn hit him up he’s a RUclips r you guys should collaborate I don’t know if you still deal with SurOn but you have Ducati and he’s a moto vloger
Unfortunately he’s too late to the game. The Sur Ron boat has set sail already. But i do still have the fastest one in the world! 2 years going
the range on that radio gear is bad wounder if you could boost the range some how 70mph is chipping
I get around 400ft of range. 300-350 is safe.
2:07 the fact that nprc tuning has developed so much since the point of you publishing this video to now where people are pulling the same eta w a vxl is system amazing
Whats happened to Marcus he hasn't uploaded in a while
He is working full time and has a pretty busy life outside of work as well. I talk to him frequently.
Mint
I been watching good work
Thank you!
What’s the color of the car?
White.
Got it
Freaking awesome
It would be cool if there was a 2 speed transmission available.
Send you stuff? Send me stuff
Awesome video!!!! THe late night the parking lights on reminds me of old school street racing!!!! Happy RC’ing Y’all 🇺🇸❤️🤘🏽🏁
Kindly I use the same type of gns but after some time using it I realised that it is not giving the proper readings in my opinion. The faster the car goes the more inaccurate it is.
First of all the gns stop reading or calculating before the end of the run so it doesn't calculate the top speed at the end of the run!
Secondly the time elapsed to cover the 132ft or 40m it is also not accurate and I think that also not all apparatus are calibrated the same because everyone use his gns and some get better results and when we race together with same cars, the cars with the slow readings overtake the other cars with the better time results.
I use to use it to see if I made some improvements but I do not think that it is accurate.
I gathered some results and test that I done comparing it with the esc data log, I came to my own conclusion that it could be misleading!
This is all my opinion and I could be wrong and stand to be corrected.
Exotek twisters man!
I think you take to long between heating the tyres and your launch! Heat them an let it rip immediately!! Great 70mph tho👍
NICE 🦢👍
I’m really just cleaning them off more than heating them. I use tire warmers before each run. But yes you are right
@@JackCecil cool Jack, I didn't mean to sound pushy, it's my lack of keyboard skills sometimes I must come across like a right tit! 🤣. Love the rc content it takes me back to when I had loads of rc. big kids aren't we jack, im never gonna grow up!!
👊✊💥💨💨💨😉
NICE 🦢 BROTHER 😉👍
Put some lights on your car . Better to see at night.
Yea for sure. I’d like to do underglow
Nice 👍
Subbed great work
Looks dam fast
Niiiiiiiiice
Great video, slick car. BUT those MAXX AMP batteries are the absolute worst packs around. Pls do some research. SMC if you don't wanna read up. Good luck!
Fact here to back up what I said.
I run SMC as well. I try everything.
3 days with my drag slash and already want to make it faster 😩
How did you make it 3 days?! 😂
@@JackCecil for it being my first RC I'm not even sure 🤣
- 👍 👍 🔧 -
Why is et so important to you
Salut my friend super car super video subscribe subscribe..
Turn that TSM off
I should have mph sorry et is the most important
70mph at a 2.3 ya you have no traction at all