Building a Traxxas Drag Slash | Proline Drag Slash | No Prep Drag RC Car | Buy or Build
HTML-код
- Опубликовано: 8 фев 2025
- Complete parts list to build a Proline Drag Slash - bit.ly/3fHBOAJ
Traxxas Drag Slash RTR - bit.ly/2RXvGva
Want RC tech support, giveaways, or help promoting? Check out my Patreon page:
/ marksantamaria
Join the “MSM Drivers Meeting” community! bit.ly/35jlZuR
Save money watching my vlog:
www.prolineracing.com - Proline Racing 10% off with coupon code “msmvlog”
www.tonyscoffee.com - My favorite race coffee Tony’s Carmelita 20% off with coupon code “marksantamaria”
rcbodyarmor.com/ - Save 10% with coupon code “MSM10”
www.macscdp.com/ - Save 20% on orders $25 or more “MSM20”
Best Beginner RC Car:
Slash - bit.ly/39TMvdu
Slash 4x4 - bit.ly/391JoRb
My Top Electric Bashers (Updated):
Tekno MT410 - bit.ly/2XUWURu
Traxxas E-Revo 2.0 - bit.ly/2twJfVV
Traxxas Hoss - bit.ly/31U4Pkl
Traxxas Rustler 4x4 VXL - bit.ly/3xfBIqB
Arrma Vorteks 3S BLX - bit.ly/2Pdh9d9
Traxxas Slash 4x4 Ulitimate - bit.ly/2Xogh6j
Traxxas Maxx - bit.ly/2R0K0A7
Traxxas XMaxx 8S - bit.ly/2X6Liuu
My Top 5 Nitro Bashers:
Traxxas Revo 3.3 - bit.ly/2yMF8qZ
Traxxas Jato 3.3 - bit.ly/3dStjyr
Traxxas T-Maxx 3.3 - bit.ly/2VFgBN7
Favorite Basher Tires:
10th Scale - bit.ly/3oqloNY
8th Scale - bit.ly/3s3Rphm
Large Scale - bit.ly/2X71eOh
My Crawler Scale Rigs:
Traxxas TRX4 -
Favorite Battery Chargers (Updated):
Spektrum S2100 - bit.ly/2EAiiWp
Prodigy 625 DUO Touch AC - bit.ly/37Ot9Fo
Traxxas EZ-Peak Live Dual - bit.ly/2SND9KT
IDST Dual Charger - amzn.to/3dTeKuG
IDST AA and AAA Charger - amzn.to/2VHTcdY
Best Beginner RC Race Cars:
Tekno SCT410 -
Tekno ET48 2.0 -
My Race Vehicles:
Tekno ET48 2.0 (Etruggy)-
Tekno EB48 2.0 (Ebuggy) - bit.ly/2uhtUsI
Tekno SCT410.3 (4wd Short Course Truck) -
Tekno NB48 2.0 (Nitro Buggy) -
Tekno NT48.3 (Nitro Truggy) - bit.ly/38u69gU
Tekno ET410 (10th Scale 4wd Truck) - bit.ly/2yAAHfG
Tekno EB410.2 (10th Scale 4wd Buggy) - bit.ly/2YIiFo6
My Race Gear:
Radio - bit.ly/2GMghET
Race servos - bit.ly/2yBiuif
Nitro Engine - bit.ly/38mIv5E
Tires - bit.ly/2YHJGpQ
Race Oils - ptrcracing.com/
Fuel - vpracingfuels....
Batteries - bit.ly/2KoMR0P
My Son’s Race Vehicles:
Tekno SCT410.3 -
Tekno EB48.4 - bit.ly/2GLnkOg
Best All Around Race Tires:
Buggy - bit.ly/2FPjKl6
Truggy - bit.ly/3a8Ln6E
SCT - bit.ly/2tYXh2k
4wd 10th Scale Truck - bit.ly/388NzJT
Favorite Lipo Batteries
Protek Lipos (Race Packs) - bit.ly/2KoMR0P
Traxxas Lipos (Basher Packs) - bit.ly/32cHZV1
8th Scale Race Electronics:
Speed Control (all) - bit.ly/3dm7RCM
Must Have ESC Fan -
Motor (eBuggy) -
Motor (eTruggy) - bit.ly/3a8vfBL
Motor (Short Course) - bit.ly/3bdg9es
Servos:
Protek 170SBL (Best Race) - bit.ly/2yBiuif
Protek 370TBL (Best Crawler) -
Protek 155T (Best Basher) - bit.ly/37N08tN
Protek 130T (Better Basher) - bit.ly/3bVCb6L
Protek 100T (Good Basher) -
Hobbyking 15298B (Super Cheap) - amzn.to/2HJKe8Y
Favorite Tools (Updated):
Protek Drill Tips - bit.ly/324wX58
Protek Hex Drivers -
Protek Nut Drivers - bit.ly/2NSjfLc
Compact Set (New) - bit.ly/2GhibQC
MIP Thorp Drivers - bit.ly/2GKSIwu
MIP Thorp Nut Drivers - bit.ly/3irCJEs
Dewalt Electric Screwdriver - amzn.to/3jGn3wI
Oil Bag (Must have) -
Want to send me stuff to review or show off?
Mark Santa Maria
6710 Virginia Pkwy Ste 215 PMB 69
Mckinney TX 75071
Follow me on...
Patreon Page - / marksantamaria
Instagram - @themarksantamaria
Facebook - / themarksantamaria
RUclips - / marksantamaria
On The Tone Podcast - / onthetonerctt
On The Tone and Mark Santa Maria Vlog shirts are now on sale!
Colors - Blue with White, Black with Camo (+$3)
Email merch@msmvlog.com to order.
$20 for S-XL
$25 for 2XL-4XL
$10 for face mask
free shipping (Lower 48 only)
Music by Joakim Karud / joakimkarud
Music by: @dcuttermusic www.davidcutter...
#rccar #msmvlog #rcvlog 
Развлечения
Man that purple body is so sick! Nickname it purple rain. And the black nova reminds me of Kurt Russell's death proof car. Soo cool!
Call it fat Barney
Something many have figured out - it's cheaper to build a narrow-bodied no-prep car from a Bandit, than it is to build from a Slash. With the Slash-based build, there are quite a few Bandit parts needed...but, with the Bandit-based build, for the most part, all you need is the Slash LCG Conversion Kit, and a few Slash front end parts.
EDIT:. I commented about the Bandit-based vs Slash-based build before I watched the entire video, only to discover you end up mentioning what I had also said.
Also, you'll be hard-pressed to find many people using that Pro-Line wheelie bar. Having a single ground-contact point could turn out to be more problematic then it's worth.
Also cheaper just to get a DR10 or 22S kit.
@@jyax0647 But more enjoyable...a LOT MORE enjoyable...actually BUILDING your own car. Sure, you can let the factory build it for you...but, until you build your own RCs, you'll never understand that building them is half the fun. Even in getting an X-MAXX, instead of buying the RTR, I bought a roller from an RC chop shop, and am building it how I want it. Out of all my land vehicles, the ONLY one that was an RTR was my first Rustler 4x4...ALL others were kits, rollers, and, in the case of my two Class 3 comp crawlers, built entirely from individually purchased parts - now THAT'S how to truly do RC.
Don't be lazy...build something crazy.
@@robbryan3044 And that’s why you buy the kits. I fully agree building a kit or finishing a roller chassis is way more fun.
im building one using a slash cause i already had one my friend gave me it does take alot of parts im just not using driveshafts if there too long ill shave them down and work with em till i need em im not doing any hard launches so i dont need the thickies
That 1 wheel wheelie bar doesnt seem like it would work that good
The purple slash almost looks too nice to drive 😍
Yes man love it murder nova is my favorite street outlaw that thing came out sweet can’t wait to see your other one
I wonder if those Mickey Thompson's are exclusive to the drag Slash, I wouldn't mind some for my DR10 build.
they are super wide too... I like them.
Didn’t take much to figured out the math!. I’m glad they produce one RTR. 🇨🇱👍
Great conversion, Mark. I have to say both of them look sick, the Proline Drag Slash and the Traxxas one. I have just bought a used Proline 2wd Short Course Truck, that I will use for my Drag build.
i kept wondering why my CAR destroys these... its because you clowns are using trucks made for the dirt. lol keep on losing.
I was super excited for the drag slash, even waited for it to come out. But I think I'll just build my own. I can make it the way I want and yes, you can build it cheaper. - if I bought the rtr I can almost guarantee it will see little to no use
Murder Nova!! I just converted my Slash to a Drag Slash. Did the clear 68 Nova body. Painted pearl black w tinted windows, black wing, black wheels. Got the aluminum wheelie bar & it throws sparks. So much fun!
edit: I used Bandit rear arms I had laying around. I couldn't get the rear tires tucked under the rear fenders. Ended up cutting them out more...looks ok. Yours is better.
BUILD! Always build!! 😁 Paint is almost the best part!! My choice would, for the first car, is the Proline 3rd Gen Camaro, 2nd would be a 60s Nova, and last is 80s Regal 🏁🏆✊🧨🔥🔥🔥🔥🔥
I see that Kevin got a Green one. I put it on my Wish list for next year. Great video Mark
Awesome video as always, really appreciate the links in the description, makes watching your videos way better than other ones I have watched. I can see something I might want and don't have to rewind and search for the item.
That’s a beauty!… But!…But!…wait for it Mark!…you missing your MSM stickers on it Mark!…lol 😂😂😂🇸🇬
The purple is badass looking
Dude.....that thing looks sick.....love the Black Nova body. It's cheaper to buy it built....you can cut corners on somethings to make it cheaper....but it's cheaper rtr.....great video👍
I think on the proline Chanel they posted a build video and they drilled the holes on the caster blocks out
Wow you dropped that juicy content with perfect timing. This is good stuff Brother. You put in work on that mod to get it done. Super Clean
Looks badass mark,Good job!! Stay Safe Stay Healthy
Street outlaws fan? Nice! I use to be part of the pit crew for Lizzy's dad!
Are you going to do a review on the 4-Tex 3.0
Of course!!!!
That clear trans case looks sikk!
Dude!!!!! I'm gonna try in build my own!!!!!! Awesome video...I also subscribed!
I am in love with your garage!
Thanks for all your time and effort 🙏 it is very much appreciated
I trimmed the stock front body post down to the hight I wanted and re drilled pilot holes worked great. Just built pretty much tge same car minus the new transmission. To me it cost a little bit more but pretty satisfying when it done.. awesome vids
I’ve built and still in the process of upgrading and changing my traxxas drag car.
Thanks mark... I'm probably gonna buy...then build some later...your car looks amazing...cant wait to see some hits...🤘😆
Love this truck. Even though I dont have one yet. I want this purple one and the red one and the black one and the white one lol .thanks for sharing with us mark. Great video 💪👍✌💯🍺🤘🚬
You gave me a great idea. I have a bandit that is needed rebuilt. Get a LCG chassis and convert it.
Dang man you've done up a Traxxas drag slash the way I've always wanted to but I've made my mind up hopefully soon ill have the losi drag car the camaro.
I built mines from scratch.. all in all to make it to a roller and to keep it coast down with plastic shocks and the regular transmission case with start gearing without electronics remote I spent approximately 220 that’s without the body body cost me about $55 .. now adding the electronics I paid 180 as tax included for spectrum remote with receiver and another 160 for castle creation combo … so it was over 500 just building it
That thing looks allll the way killer nice job.
I am definitely going to Canton next weekend for the drag races
Picked up a new bandit vxl slider for $70 from a chop shop. Lcg slash chassis is $35 locally. Wheels and tires are $80. A cheap 5.5 brushless system was $75. Body was $50. Made my own wheelie bar for $10. Used a gt3c that I already had for a radio, just needed a $16 receiver. Total cost was $336. Runs a consistent 2.76, is solid and straight down the track, and was 100% built on a budget. So it can be done cheap, if you source your parts in different ways.
Nice. I used same body with same color. I just added blue flames
What a great project and the result looks very cool! 😎
Heck yeah man thanks for the build I'm going to try again to get mine together you put part's I needed down I got that nova body also thanks
nice looks great i got the proline trans for my bandit street and dirt basher
Mark shoutout to FORCE. Filipino Okanagan RC Enthusiast here in BC Canada!
Can you put a set of regular street tires on these to cruise around and then throw the slicks and wheelie bar back on when its drag racing time?
Mark great job. In the videos I’ve watched using proline shocks they say to use front shocks in the rear as well. The front shocks don’t push the a-arms down as much.
If you want the flat paint finish you can take a very light sand paper or scotch bright to the body before you add stickers
I'm still deciding on my opinion on drag racing , I need to go to a race
My absolute favorite rc RUclipsr. Thanks for all the great content and information Mark!
Thank you sir!!!
I want to do a custom build personal drag car, with a front engine, solid rear axle, basically make a true scale drag car.
that looks beeeeeeutiful
I converted my rustler to a traxxas drag. It's a multifarious mess of parts from the slash to the bandit but I pretty much settled on the lcg chassis with hardend plastic bandit arms on back and aluminum front slash arms. I'm also running the shorter front shock all around with the big bore aluminum shocks up front and the stock shocks that came with the rustler. As for the transmission.... I have 3 I swap in and out. I have the pro line 32 pitch which is alright but I like my hot racing all aluminum transmission and I also have a Robinson racing all metal 32 pitch spur gear which is my favorite spur gear. I run 1s and 3s with the gear ratio low to keep Temps down and have longer run times for the bash/speed runs. As for the wheelie bar I also have a few to choose from. I have the pro line on you have as well as the hot racing one which I don't like the ascetic to much. Not pleasing to the eye but the one I love the most is my dr10 carbon fiber wheelie bar custom fitted to fit any traxxas motor protector don't know what they call it. The only price I want to replace is the 30° bulkhead with the 0° one the slash drag comes with. Very squirrly if toe and camber are at 0°.... and I have both same bodies for my traxxas drag build pearl white nova and a crimson rosewood c10. Oh an I'm running pro line Hoosier all around sitting on j concepts rims. Yea love it lol
You need bandit front and rear axles. Only rear arms are needed
Looks nice. Will be interesting to see how they compare on track. Great vid Mark 👏👍
What are the caster block differences a little more in depth?
The holes that the hinge pins go through are larger on the bandit... its strange
Even though the drag slash looks nice, I prefer the murdered out Nova 😎😆
Its awesome when they give it to you
I built one for around 400 or less but definitely cool seeing you do it
Hell yeah great video man can’t wait to buy one
cool body .. i got sharkrcbodies gto i made mine to look like the big chiefs crow . im just waiting to i can get traxxas drag slash
Great Info Mark Im joining your patreon I was building a Rustler for speed runs but I think Im gonna switch to a drag Car...I have a bandit/Rustler chassis and I have castle power all ready I printed out your parts list and Im gonna build one or convert my speed runner into a drag car...Thanks again
Try out dr10 from team associated? Upgraded spur to 86 pinion to 31.... Things hot and blows slash out of water......
This is just my opinion or thoughts. If you're going to be competitive a custom chassis, esc,motor and a few other things i would think you would be money ahead building one but if it's just one to run on the street and mess around with the rtr would be a good idea and upgrade as you go. Kinda like racing our rc10s and jrx2s back in the 90's by the time you upgraded all the aftermarket stuff there wasn't much left for stock parts.
😍😍😍 love it
Ok.....so I made my comment BEFORE your video even started lol! This is cooler then I'd like to admit 😜 There is a RUclipsr named Freshsqueezwrc and he took an LCG chassis to make a drift car! I'd really like to see that! And also cause my son has an RMX and it's been a pain to build and also cause I'm a Traxxas fan 😁 Anyway dude, awesome as always!! Love your stuff and love hearing your advice 🤘
Nice you need to get a flat clear and spray the outside making the black paint flat 👍🏼🤙🏼
Remember to balance your tires and then you have fun
Bro I saw an infraction v2 on ya shelf in a video when are you going to do a vlog on that
Build one, i have and definitely cost me less than $500...
That's not even including the fact that you have to spend another $100+ for a new radio because you can't use the tsm receiver for racing.
@@gasolinediesel972 Can get a radio for $45 and it good enough considering range is only 150 feet
@@fencer39 You have to get a radio with good responsiveness. You don't want some cheap garbage.
With the tranny, tires, body, and brushless?
Same
There was a lot of people asking when you were and if you were going to be at the drag race at Tulsa. Not sure why they keep saying Slash, because most of the parts other than the LCG is mostly Bandit parts
Aww man! I should have went. Yes... its totally cheaper starting with a bandit.
All u have to change on the front is the pins that hold the wheels... I built one exactly the same : )
Very cool. Spot on about the cost factor in building one up. Especially the person who has nothing to start with. Maybe a person with extra cars or parts could be a little cheaper but not that much. Can’t wait to see the side by side running. Which car does Q-top get to drive against you
Hes driving the traxxas one with tsm on... hahaha
@@MarkSantaMaria be careful he might beat you with the off the shelf model.🤣
Awesome video like always who's your painter
Oh my gosh you gotta show us that painted body now dammit!!! 🔥😁
Get a 2 pole motor and ESC system for a faster 2s ride. 4 pole motor is slower on 2s.
you should of got the same 90mm size shocks front & rear, if this a Drag car 🤘🏼💯
The losi drag s22 has everything exept the shocks for less.... when we say its overpriced we mean that iin this meta game the competition offers more than what the drag slash can
The Losi doesn’t have the trans brake, which is a neat feature. I don’t know if it make you more competitive.
@@zaccarrollart3493 I see no use for the trans brake. It would almost be better to pull the trigger because of how much of a pain launching the car can be. Instant power really fast, in my experience, usually makes you spin out.
@@jyax0647 I can see that. Does this one have the gyro? I’m just wondering if the tech is where some of the cost is, I’m new to this and looking to get one just weighing options.
@@zaccarrollart3493 Yes, it has a gyro. But that’s banned from competition use.
I believe both the Team Associated DR10 and Losi 22S drag car have gyros at a WAY lower price than what traxxas is offering.
Plus, the DR10 and 22S perform much better than a Slash.
@@jyax0647 so let’s say you were buying one which would you choose?
look how much fun you had building your own car. the look on your face said it all vs buying one already built. plus is the Traxxas drag slash competitive out the box or will you have to spend more money to be competitive at your local track. I say build your own vs spending $500 on a truck that your going to be swapping parts on anyway.
Do you have to put the bandit rear arms on?
i’m new to the rc stuff and my first car is a slash 4x4 ultimate. can i make that into a “drag slash” just by shaving some weight and putting some slicks on it. what really makes a drag slash? i’m new to this. just wondering if i can do it
So what I’ll say is my friend gave me his old 4s maxx system. I put that system in my stock 2wd slash stock trans played with the gearing and I guarantee it will take the new drag slash any day of the week.
I wonder if you use a LCG Slash chassis with 3d printed parts will hold up for rc drags
Looks good!!!
Do you think I cal build one with a helicon domonios 10sc
do i need to change out driveshafts to or just the links and a-arms
The nova body fits the drag slash f10 stock body mounts ?
Does the proline trans have the trans brake feature?
Out the box you still gotta do work to it it’s about gearing on 2s
I would love to see what is faster
If I wanted to swap to the pro-line transmission...is it a direct swap with the drag slash?
Really nice car street outlaws
I have a question. Can I run a 3s lipo with the stock setup
I think it would be worth it especially the new radio and the new rear end
Will the nova body fit in Traxxas drag slash?
Put good year decals on the rear
I agree with its cheaper to buy a drag slash to building one with the same accessories but I think you could buid a faster slash then the drag slash with a better esc and a 2.5 or 1.5 turn motor
Hey Mark I already have a remote that has launch control in it would you go with the low seat 22 for speed
does coda racing casterblocks work?
Are the arms the same on 2wd and drag slash? Or are they bandit arms?
How you adjusted punch setting on arrma vorteks
The proline diff vs the Magnum?
Need help please. I am just starting in the 2s No Prep scene. I purchased a traxxas drag slash recently but am trying to upgrade it. On 3s, the motor is amazing, 2s, it seems really slow compared to what I've seen. I bought a Spektrum Firma 100A Brushless Smart ESC / 6500Kv Sensorless Motor Combo: No-Prep, SPMXSEMC13 to replace the stock motor but I think I made a mistake and might return it. what is the best affordable motor (not more than $200) you would recommend?
ohh is there a way to make the proline from 32p to 48p trans maybe you could help me out there
I have the dr10 with the 69 nova body and a c10 back up body
Should do a arma limitless build
My bandit is in the process of being in a drag car