Hahaha aye yo don’t call me out like that! My guitars 9v just died the other day so it’s funny this comment came up cause now I don’t have 9v for the guitar or the DD-1 😂😂😂
wtf its like youve been reading my mind. I was either going a audiocontrol amp or a lc2 with a different amp... I wasnt sure if that was overkill for the signal. I do think Im just sticking with the tesla box from skar for 1 10" though. Chances are I'll be going big later just cause.
I can’t remember what wires they are, a quick Google search will turn up that info for you though! On the 21 SR+ they’re behind the driver side kick panel, so look for info regarding that!
@@BaggedDev I just found your other videos. I got both of the items in my cart on Amazon. How exactly is the resistor connected. The relay I understand how to connect that but I'm slightly confused on where the resistor is placed and wired, can you recap how it's down?
@@shiznilti7477 the resistor connects to both sides of the relay. The resistor let’s a little power pass by the relay while it’s off so it slowly charges the capacitors in the amp before the big relay kicks on. To recap, the big wire coming from the DC-DC converter, run that to the relay post on the right, you’ll also attach one side of the resistor to this relay terminal also. The connect the other side of the resistor to the big output of the relay, you’ll also run the rest of the big wire from there, into the amp.
@@BaggedDev excellent reply. I now know exactly how to do im order to get my JL RD.1000.1 and W6v2's in a 3.5cuft @ 32hz aero port enclosure installed now. Thanks so much for all this info! /subscribed
Where did you pull the power for the LC2? Did you just bridge it off amp 12v input? Ive got a 2023 3 base model and Im going to run power off the battery (Im reading it will help with code issues) but I don't want to tap a second line unless I have to.
I would suggest not running anything off the battery. Any draw off the battery can trip the battery management system and throw faults. I ran over 200amp of current draw directly off the DC-DC converter without issues. The LC2i pro has built in turn on when your signal source (I used the drivers door woofer) turns on, and that signal turns on the LC2i pro. Main power and ground for the LC2i I just pulled from the amplifier. If you watch both parts of these videos, everything should be explained and if you follow exactly how I did everything, you’ll be problem free. If you do it your own way and run into problems, my only help is to undo the way you did it, and do it the way I did in the video. Haha
@@BaggedDev Thanks! for some reason when I looked at the channel I didnt see a second vid. Its here, I was just being dumb. its strange because breakers suggests to run it off the battery side for the 2023 do to the 16v system? Its getting a bit muddy on info, I'll take another look at both.
Would change out the skar subs , to 2 SUNDOWN 10”s , run it at 2000 watt rms @ 1ohm 😅 , at least it’s what I bought, I hope 🤞 it sounds good 👍 can you help me? Information
They also say to break engines in, yet dragsters rebuild their engines and then go wide open throttle at 11 thousand horsepower. Haha. I've been in car audio for 10 years, I appreciate looking out for the subs and me! I'm sure they gonna be fine, this isn't my first setup and I've never had issues. Im not playing it at full tilt every time they're on. A quick test or playing with them isn't gonna kill them. The coils don't have enough time to over heat with how little I play it, and it's distortion free and also detuned from the headunits EQ!
@@BaggedDev no problem I wasn’t trying to come off rude just looking out for fellow bass heads I have a Skar evl 15 in my pickup she’s a unit love there brand
@@navygt7497 all good, hey I appreciate it! Love the Skar stuff! Replaced my 8” with these 2 10’s and couldn’t be more happy! A lot of bang for the buck!
Those Duracell batteries are know to leak and wreck anything the juice lands on! LOL. Nice job!
@@curtchase3730 hahah thanks!
Let's start a gofundme to get this guy a second 9v battery so he doesn't have to take it from his guitar 😂
Hahaha aye yo don’t call me out like that! My guitars 9v just died the other day so it’s funny this comment came up cause now I don’t have 9v for the guitar or the DD-1 😂😂😂
What wheel type and size you go with do a video on it! Great content 👍🏼
I’ve since sold the car and don’t remember the wheel specs and stuff anymore! I’m sorry!
wtf its like youve been reading my mind. I was either going a audiocontrol amp or a lc2 with a different amp... I wasnt sure if that was overkill for the signal. I do think Im just sticking with the tesla box from skar for 1 10" though. Chances are I'll be going big later just cause.
How do you like the single 10"? Which amp did you use?
Great informative video thanks! You said you use front bass for signal, how do i know or test which wires are those? Thank you in advance!
I can’t remember what wires they are, a quick Google search will turn up that info for you though! On the 21 SR+ they’re behind the driver side kick panel, so look for info regarding that!
Did you figure out the issue with error codes you were getting? Did you end up having to run a second battery with a isolator relay?
Just a relay to isolate the bass amplifier. I have a video for building the amp rack and it shows exactly what I used and how I wired it up
@@BaggedDev I just found your other videos. I got both of the items in my cart on Amazon. How exactly is the resistor connected. The relay I understand how to connect that but I'm slightly confused on where the resistor is placed and wired, can you recap how it's down?
@@shiznilti7477 the resistor connects to both sides of the relay. The resistor let’s a little power pass by the relay while it’s off so it slowly charges the capacitors in the amp before the big relay kicks on.
To recap, the big wire coming from the DC-DC converter, run that to the relay post on the right, you’ll also attach one side of the resistor to this relay terminal also. The connect the other side of the resistor to the big output of the relay, you’ll also run the rest of the big wire from there, into the amp.
@@BaggedDev excellent reply. I now know exactly how to do im order to get my JL RD.1000.1 and W6v2's in a 3.5cuft @ 32hz aero port enclosure installed now. Thanks so much for all this info! /subscribed
Where did you pull the power for the LC2? Did you just bridge it off amp 12v input? Ive got a 2023 3 base model and Im going to run power off the battery (Im reading it will help with code issues) but I don't want to tap a second line unless I have to.
I would suggest not running anything off the battery. Any draw off the battery can trip the battery management system and throw faults. I ran over 200amp of current draw directly off the DC-DC converter without issues. The LC2i pro has built in turn on when your signal source (I used the drivers door woofer) turns on, and that signal turns on the LC2i pro. Main power and ground for the LC2i I just pulled from the amplifier. If you watch both parts of these videos, everything should be explained and if you follow exactly how I did everything, you’ll be problem free. If you do it your own way and run into problems, my only help is to undo the way you did it, and do it the way I did in the video. Haha
@@BaggedDev Thanks! for some reason when I looked at the channel I didnt see a second vid. Its here, I was just being dumb. its strange because breakers suggests to run it off the battery side for the 2023 do to the 16v system? Its getting a bit muddy on info, I'll take another look at both.
Nice 👍
Would change out the skar subs , to 2 SUNDOWN 10”s , run it at 2000 watt rms @ 1ohm 😅 , at least it’s what I bought, I hope 🤞 it sounds good 👍 can you help me? Information
What battery is the subs running off of?
It technically isn’t running off a battery. If you watch the videos you’ll see where the amp is powered from. It’s power from the DC-DC converter.
Subwoofer are supposed to have a 20 hour break in period at 1/4 gain too just letting u know
They also say to break engines in, yet dragsters rebuild their engines and then go wide open throttle at 11 thousand horsepower. Haha. I've been in car audio for 10 years, I appreciate looking out for the subs and me! I'm sure they gonna be fine, this isn't my first setup and I've never had issues. Im not playing it at full tilt every time they're on. A quick test or playing with them isn't gonna kill them. The coils don't have enough time to over heat with how little I play it, and it's distortion free and also detuned from the headunits EQ!
@@BaggedDev no problem I wasn’t trying to come off rude just looking out for fellow bass heads I have a Skar evl 15 in my pickup she’s a unit love there brand
@@navygt7497 all good, hey I appreciate it! Love the Skar stuff! Replaced my 8” with these 2 10’s and couldn’t be more happy! A lot of bang for the buck!