2015 VW POLO BRAKE SHOES REPLACEMENT
HTML-код
- Опубликовано: 18 мар 2021
- How to Replace VW Polo rear brake shoes 2015
Track: Malik Bash - Apollo [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Malik Bash - Apollo | ...
Free Download / Stream: ncs.io/apollo 
Авто/Мото
![Bremsbacken wechseln - VW Polo [TUTORIAL]](http://i.ytimg.com/vi/l_Q1WXmwsEI/mqdefault.jpg)
![[DOKKAN BATTLE] August Producer's Letter](http://i.ytimg.com/vi/JUTYpaV_4Ic/mqdefault.jpg)
You explained this procedure very clear broke it down for novice like me with all them springs ! Top guy thanks Frank
Thanks for watching really appreciate it
Thanks very much for this tutorial, made it simple to change the drum brakes with no experience. The spring setup would be so confusing without it. Much appreciated!!
Thanks for watching really appreciate it
Great video with useful details! Thank you.
This man deserves a bell all the way from south africa
Thank you, thank you, thank you. I know how to do this now. Mind you, you made getting that first spring back on look very easy. I also struggled with the spring on the hand-brake cable. Thanks once again.
You are most welcome. Thanks for watching really appreciate
So easy to follow. Was about to call a mechanic . I am doing this myself now, no doubt. Thank you!
You are a very likable person btw. I really enjoyed watching this.
That's great trying my best hopefully you get the job done. Thanks for watching really appreciate it.
@@TEAMR4ULTV I did it, and it went well. Thank you! :)
You're a legend Raul! keep the VAG vids coming my man! especially SEAT IBIZAS! Thankyou sir
Thanks for watching really appreciate it
Simplified tutorial thank you very much.
Thank you bro 👍 helped me loads, today.
I've just dun one side but thanks to u that u shown me the adjuster I didn't know what it was love yr vids
Thanks for watching really appreciate it
Nice vid helps me alot thanx
Great video just subscribed. As a viewer some friendly advice, if you put your repair videos into playlists by manufacturer aka vauxhall, ford etc it will help your viewers to just binge your video, wanted to watch the vauxhall ones but too much scrolling to find where they are👍🏼👍🏼👍🏼
Good idea will do that
Top video. Really well explained and helped so much. Keep up the brilliant content. 😊
Thanks for watching really appreciate it
Good video, thank you.
Nice job man
Great video thanks!
Thanks for watching, hope it helped you out
very usefull thanks
Great video bro
Thanks for watching really appreciate it. Please like Share and subscribe.
Great video, helped me a lot, thank you.
Thanks for watching really appreciate it
@@TEAMR4ULTV No, thank you🙂🙂
Thank you 🙏
Thanks again
Good video thanks
Thanks for watching really appreciate it.
Welldone
this will save me around 70 bucks ...cheers bud.
How tight should be wheel bearing?
thank's bro.
Thanks for watching really appreciate it
nice video thankyou , after installing a new cylinder why would the shoe on the right keep slipping off towards the backplate and landing on the rubber grommet of cylinder ? even though everything is in place , any ideas thanks
On the cylinder there are little groves or cut outs to prevent that from happening just check if its facing the wrong way if so just spin it around
ThNks bruv
Your welcome
Thanks for the video mate. I think I’m better off paying £40 do get them done instead
So how did you adjust it. I know you slid the adjuster up until slack. But do they auto adjust when you press the brake pedal?
No you have to adjust them on the hub first. On one side of the shoe if you pull it either way you will see the adjuster go up or down then just adjust it accordingly.
Hi what did you torque the hub nut too
If you want the exact torque setting just check autodata. I just used a breaker bar/strong Arm and did it tight as posible.
Great video but a couple of questions...do you need to replace the self locking hub nut with a new one ?...and is there a torque figure for tightening the nut?
Thanks
You don't need to Replace the nut. As for tightening the nut there is a torque setting around about 150nm but to be honest just do it tight as you can with a braker bar/strong arm
@@TEAMR4ULTV ok thanks !
150nm???!!! buddy, not so hard. the instruction provides for tightening 70nm and 40 degrees. of course you have to put on a new nut or give thread glue.
Mate stop giving out bad information.. axle nut should never be tightened to 70nm.. unless you want the whole thing to come off some day.. and yes you can use tue same nut as long as you tap a notch back in .
@@thooney2934 Sorry to disappoint you, this information is correct, torque 70Nm+40ﾟangular, it's generally recommended to renew all the self-locking nyloc style nuts, as there is no groove in the stub, nowhere to tap a notch. Simples.
Great video. Been looking to do them myself since my local mechanic quoted me £240 for drums snd shoes on both sides. Not sure im confident to do it myself, is £240 a good quote?
That's okay price. Thanks for watching really appreciate it
@@TEAMR4ULTV Thanks for the response! Keep up the great content
My understanding is if you put the drum back on and press the foot brake the adjuster should drop and adjust that way ?
Thanks for watching really appreciate it. To be honest I never done it that way. Might work
@TEAMR4ULTV Yes, if you look at how the adjuster is designed to work. It's self adjusting as the wheel cylinders operate and brake wear takes place. The adjuster will drop with the tension applied from the spring and adjust the shoes. But the video was great. I would definitely recommend a dedust next time of the back plate and grease the high spots where the shoes contact that back plate . Other then that a good job done..
Is the spring kit included with the new brake shoes pack? Or do do you have to buy them separately ?
I had to buy them separately.
Thanks for watching really appreciate it.
@@TEAMR4ULTV I ordered a full set of brake shoes with springs included and I will try to replace it myself. Doesn't look very hard from the video. Thanks for showing us every single step 👍
@@TEAMR4ULTV Just a question. I only have the small jack that is included with the car's tool kit. Is it going to be enough to secure the car for as long as it takes to replace the shoes? Or should i buy a hydraulic jack instead?
@@imrxnz2531 thanks for watching really appreciate it. To be honest them small Jack's are not that safe there ok for the odd tyre replacment on and off, but for you to Replace brake shoes not safe.
@@TEAMR4ULTV thanks bro. Could you please check the video I uploaded on my channel please? My cars started making a noise when i turn the steering wheel. Do you have any idea what could it be?
Wow great video! Question, do we need to mess with the adjuster? In the video you knock it down to tighten and knock it up to slacken. Doesn’t it auto adjust after applying the brakes?
Thanks for watching. It doesn't auto Adjust unfortunately so you do need to mess with it eventually.
R4UL TV thanks so much for explaining. You mentioned that the lever should move freely on the new shoes but I received my new Apex branded shoes and one side moves freely but the other side is slightly stiffer to move. Can I grease the lever bolt with something? If so what do you recommend, wd40 or a thicker grease? Thanks again!
@@seemaab I wouldn't use grease or anything just pull the lever up for example if you have the shoe on your hand just try bending the lever towards you just a mil its should go free
Am sorry but its very hard to explain via message
R4UL TV The new lever on the brake shoe doesn’t get smoother, it has a jerky motion when I pull or push it. The new lever for the other side moves very smoothly. It’s as if the bolt is pressed too hard or doesn’t have enough grease from the manufacturer internally.
Could you not have cleaned the backplate with brake cleaner?
Hi how to download your video
Just use any mp4 converter app
Easier way to get drum off is pop up the handbrake adjuster wedge with a screwdriver through one of the bolt holes .
Thanks for watching really appreciate it. Thanks for the advice I'll try it next time
5*
Good video but honestly guys, take it to a garage. Not quick or easy to DIY. If you do try DIY, dont forget to grease contact points or brakes will squeek when driving. Also to fit the new springs, it's easier to pull using the old springs instead of a flat head screwdriver
Thanks for watching really appreciate it