If we reset Syrotech router & just plug in fiber cable in it & also lan cable to tp link router. Then can it work or not. ( did u get it what I'm trying to say)
Hi does TP-Link Archer AC1200 Archer C6 has the bandwidth control feature? If not then which router I should purchase? BHARAT FIBER is the provider and Optilink is the single band router.
When I finish setting up the router, will I still be able to use my company's modem WiFi signal for the Internet at the same time as the router signal?
@@TechRacer No actually you can set a specific device to "High Priority". It is not listed under QoS settings(although it needs QoS to be enabled). One can find it on clicking their specific device under clients. There is present the High Priority check-box. This is probably the reason he missed it.
@@jokra7915 No actually you can set a specific device to "High Priority". It is not listed under QoS settings(although it needs QoS to be enabled). One can find it on clicking their specific device under clients. There is present the High Priority check-box. This is probably the reason he missed it.
I have 60 MBPS plan from BSNL FTTH. Currently using FiberNet Small ONU/ONT router. My speed hovers between 40-50 MBPS on WiFi and there is no signal after going about 15m away from that router. Should I switch to this particular router , or any other suggestions you can give me please??😭😭😭😭😭
Normal router will support speeds upto 100mbps and gigabit will support upto 1.0gbps(1000mbps), normal routers do provide good speed upto 70mbps but above that gigabit is preferable acc to me.
Sir.... Can you please tell the exact length of the cables provided in the box i.e, Cat-5 cable and Power adapter cable... It wiuld be very helpful for me if you help... Thank you
Thank You very Much. I was searching for a way where I could extend the modem of my Fibre connection. FInally found my answer here. I have one question though. WE can also set up the PPPoE connection on the router instead of using the Dynamic IP? Why did you not do that?
Yes you can, you can ge through this ruclips.net/video/YsZVw1YKzSE/видео.html well I have bsnl connection so the telephone setup needs to be done through static ip service which is not available in tplink for that why I'm on dynamic ip
@@TechRacer bro I m using bsnl fibre service of 30mbps plan and I don't know my ISP type. While setting up the router the auto connect feature is not there. What to do ?
Well! Try using it for a day, if you are okay then keep it, but keep in mind the long term use of it, the things you are going to use on daily basis, features and all
i have bought ! i couldnt find mu mimo option on wireless settings! even i have seen advance tab > wireless but there is option for mu mimo! can u tell me how to enable
Not at all, very stable connections, I have like 12 devices running simultaneously all the time, try resetting it once, or check the client device once
Disconnection issues xan occur if you use the two routers or modem simultaneously in wireless router mode In same network If you have fiber ont and want to use tplink and that simultaneously Use tplink in acces point mode it will fix the issue Or disable ont and use router
Well RJ 11 is a telephone cable, and RJ 45 is a LAN one, no you cannot use RJ11 in this router for more info watch this video ruclips.net/video/DbIkHCtHuiQ/видео.html
Excellent demo.. Plz guide .. I am a old age non tech person .. can I procure this for BSNL fibre connection - for wifi - smart tv - wifi laptop use? they are telling some dual band G/EPON ont router - for bharat fibre which is very very confusing. If possible plz guide
Yes you can get the one from bsnl also, but the performance will not be equivalent to tplink for sure, if you get some price cut then go for single band and add this tplink as extender else it will work with the other one as well.
Hi man, I got my Archer C6U a few days back but I am unsure if it has OneMesh technology (which I am afraid there is not). Can you please confirm? And kudos to you for replying to all comments even now.
Thank you, well it does support one mesh but the only condition is that you have to pair it up with other one mesh device only, so you need to buy other router or repeater which supports one mesh.
Great video bro.. Just 1 question.. Bro I have a 100 Mbps plan. Currently I am using a D-Link N150 router and getting max speed approx 20-25 Mbps. My ISP told me to get this one.. How much speed can I expect using this on both 2.4ghz and 5ghz bands?
Yes mostly, because they usually keep 10% speed as buffer so user gets what promised, for eg Airtel, BSNL( if good line) whereas jio strictly sticks to the speeds as per my knowledge.
Well it totally depends upon the type of area, if you have less walls may be better than others, but in terms of rest functionality, build, UI, features, reliability definitely archer c6, although not commenting about tenda as I haven't used it but, archer is good option
I have configured with PPPOE and made all the necessary settings. But whenever the power goes off and comes, my wifi network gives a prompt to connect or not. It doesn't ask for password. What settings has to be changed in order to remove the prompt?
Complete the setup, login to router go to advanced settings, and check under internet if the connection mode is set to auto if not set it and try again
Hey! I have a bsnl optic fibre connection (60mbps plan). I am using a 2.4 ghz router and getting a speed of 35-40mbps. Speed is good but high ping in gaming and less wifi coverage area. I am going to brought this tp link router. Will it get 5ghz by connecting it to old 2.4 ghz router?. And also will get good ping in games and more coverage area.pls reply.
Hi. There are 4 LAN ports but the indicator lights for those LAN ports is one, then how will we able to find if any one of the LAN port stops working? Pls reply
Yes, you can but keep in mind 1gbps speeds are possible on wired connections on wifi you will get upto 600-800mbps throughput, for better wifi go with wifi 6 routers.
@@TechRacer thanks for your reply. I am confused with the terms 867Mbps at 5Ghz and 300Mbps at 2.4Ghz, what they mean? And what the term gigabit port trying to indicate? Pls reply
Here's the mu mimo advantages,MU-MIMO is an innovative breakthrough that enables simultaneous communication to multiple devices, improving overall speed and enabling network multitasking.is it ?🙂
Not really it goes above that as well, depends upon the number of obstacles in between, I could easily get it in the room exactly below above and aside of the router
Awesome video bro, I have a plan for 300 mbps (act storm), so will I get full 300 mbps speed in this router like I get when I directly the ethernet cable to my laptop??
Hi, My main bsnl fiber router is 2.4 ghz . Suppose i buy this router and connect it to my main router using Lan in bridge mode , will i be able to get dual band functionality? i want to ask can i just use my main 2.4ghz router as modem only and this as wifi router with dual band? please reply,
Bro I have same router and the problem is my asus max prom m1 do not show 5ghz but rest of my family members mobile shows 5ghz and 2.4 ghz... But for my my mobile shows only 2.4ghz...any idea why my mobile do not show...??? Can u help me?
@@TechRacer Oh also, why do many people switch off the smart connect feature ? I mean, isn't it good if the router can automatically switch to the better network when I'm closer to it ??
I have a 200Mbps bsnl fiber plan. Should I go for this router or any other router. Please reply. Currently I am using digisol onu/ont wifi router. And i am getting around 110 Mbps average speed on direct LAN connection. Wifi speed hovers between 80 Mbps. 😭
@@TechRacer dude its connected to Port 2 only and I am getting download speeds around 120 Mbps ans Upload speeds around 130 Mbps. 2 other devices are connected to WIFI as well.
Okay, then there might be problem from BSNL, if the connection cannot pull 200 then it would be same even if buy this router, best would be to first check with BSNL for this issue and once it resolves go for this one, it will work.
Well If you ask about flipkart when I purchased the picture was of v2 and they shipped v3 as you can see, go with amazon they will definitely ship v3 because v2 is now a days is almost out of stock
If you have or planning to have broadband of above 100+mbps then probably you shouldn't buy but these, go for a gigabit router or you will end up getting less speeds, if you have plan with less than 100mbps speed you can go for C50.
Bsnl ftth is getting famous day by day 👍👍
Is TP-link archer c20 good for bsnl fiber ??
@@mohammednaushad4837 yes
I BUY THIS ROUTER FOR SEEN YOU VIDEO. BEST ROUTER FOR GAMEING . THANKS YOU❤️❤️
If we reset Syrotech router & just plug in fiber cable in it & also lan cable to tp link router. Then can it work or not. ( did u get it what I'm trying to say)
No internet won't work, we need to configure it with your pppoe settings else it won't connect to internet, rest everything will work fine
This was very helpful and thank you for showing the difference between 2.4 and 5 ghz. It was helpful. Cheers mate!!
2.4 Ghz more coverage less speed, 5 GHz more speed less coverage.
This is, for my opinion one of the best i used... and in any case... TPLINK forever.
ভাই আমার রাউটার c6 টিপিলিঙ্ক, এই রাউটারে কিভাবে মেক ফিলডারিং করবো, এর একটা ভিডিও বানিয়ে দেন ভাই..
কালকেই ভিডিও বানিয়ে দেন ভাই!
wrong info, 2.4ghz can give you 100mbps too if you used web interface instead of app to manually select 40Mhz band under your 2.4Ghz wifi settings !!!
Hello sir ji maine tp link c6, wifi mangbaya hai but set nhi ho rha mobile se , landcable ko kisse jode Please reply
Currently i am using miwifi (4) Definitely shifted to wifi 6 thanks for information
Do you need mesh nodes for this mesh router to work or does it work if it only connects to your modem?
You can use it as a regular router however it is easily paired with mesh networks
Hi does TP-Link Archer AC1200 Archer C6 has the bandwidth control feature? If not then which router I should purchase? BHARAT FIBER is the provider and Optilink is the single band router.
When I finish setting up the router, will I still be able to use my company's modem WiFi signal for the Internet at the same time as the router signal?
Yes, for sure
2.4ggz gives 70-80Mbps
5ghz giver 95Mbps.
I'm paying for 200Mbps.
Want to upgrade to Gigabit router.
Which one will be best.?
Best router very stable i am using it very satisfied go for it
Wich one is better? Archer AX10 o Archer C6. I want to use it as an acces point. Similar price where I live
Sir i have a 3 bhk I’m not getting adequate speed & range in some rooms. Right now I’m using AC 750 Which router should I buy
Ideally try to keep the router at the center of house to have better coverage, else try some extender instead
Can you please post a screenshot of QOS settings in the web interface, just wanna see what sort of QoS options does it offer.
Only upload and download bandwidth control nothing else
@@TechRacer How does it work then? No rules or bandwidth priority options?
You can set max bandwidth limit that's it, no other option
@@TechRacer No actually you can set a specific device to "High Priority". It is not listed under QoS settings(although it needs QoS to be enabled). One can find it on clicking their specific device under clients. There is present the High Priority check-box. This is probably the reason he missed it.
@@jokra7915 No actually you can set a specific device to "High Priority". It is not listed under QoS settings(although it needs QoS to be enabled). One can find it on clicking their specific device under clients. There is present the High Priority check-box. This is probably the reason he missed it.
Bro which modem are u using ? Plz reply 🙏
Great video bro! who is better as access point for 300megas. AC50 OR AC60 OR C6?
DHCP is enabled in both routers (syrotech and tplink) or any one? How to configure DHCP?
Only in tplink
¿What's the principal diference of this Archer C6U (v3. 2) vs the archer c6 (v2)? - greetings from Perú 🇵🇪 🙌🏼
Major difference is in the design, chipset, and antennae, but both perform almost similar to each othet
@@TechRacer mine is c6 2nd gen but it takes around 30 secs to conmect to internet when i turn it on... is it nornal? while my iball connects instantly
Well that's completely normal, because until our main router provides an ip to it, it does not connect, that's why that 30s lag
@@NextralFacts restart both the modem and router together.. will not cause data sync issues
once you reboot, c6v2 takes 3 minutes to start, in c6 v3 it takes 1min 30s to start
Short and clear. Thank you. I have a doubt. Should we not remove the transparent cover around the towers .
Welcome, yes you can remove no issues with it.
@@TechRacer Thanks
Does this router keeps rebooting often automatically?.....heard that some people are facing the issue after use of 2 to 3months
I have 60 MBPS plan from BSNL FTTH. Currently using FiberNet Small ONU/ONT router. My speed hovers between 40-50 MBPS on WiFi and there is no signal after going about 15m away from that router. Should I switch to this particular router , or any other suggestions you can give me please??😭😭😭😭😭
Yes, you can try out the same configuration as I did for my setup
@@TechRacer sir, but this is US variant na...then how it support our connection?
I am also using BSNL FTTH, happy with the service
From my point of view, it was a great video the only issue was about the speaker's English. I think English could be much better.
And what is The different between Normal and Gigabit Router ??
Normal router will support speeds upto 100mbps and gigabit will support upto 1.0gbps(1000mbps), normal routers do provide good speed upto 70mbps but above that gigabit is preferable acc to me.
Sir.... Can you please tell the exact length of the cables provided in the box i.e, Cat-5 cable and Power adapter cable... It wiuld be very helpful for me if you help... Thank you
Cat 5e cable 1m, and adapter 1.5m approx
@@TechRacer thank you very much ❣️
Thank You very Much. I was searching for a way where I could extend the modem of my Fibre connection. FInally found my answer here.
I have one question though.
WE can also set up the PPPoE connection on the router instead of using the Dynamic IP? Why did you not do that?
Yes you can, you can ge through this ruclips.net/video/YsZVw1YKzSE/видео.html
well I have bsnl connection so the telephone setup needs to be done through static ip service which is not available in tplink for that why I'm on dynamic ip
@@TechRacer bro I m using bsnl fibre service of 30mbps plan and I don't know my ISP type.
While setting up the router the auto connect feature is not there. What to do ?
Bro can you tell how to set the router on wireless repeating mode and without a lan cable plz help
Can we connect this Tp link router with BSNL FTTH single band router and will it affect speed if I use 5GHz ? Please answer
Yes, it will give you more consistent bandwidth over wifi, I’m using it the same way.
@@TechRacer thanks for the information bro
Excellent review. And in English, thanks for that!
i had received tenda ac10 today only.. now i am confused after watching your video please tell should I return ac10 and buy c6 v3??
Well! Try using it for a day, if you are okay then keep it, but keep in mind the long term use of it, the things you are going to use on daily basis, features and all
@@TechRacer ok sir.. thank you 🙈 so much... can you tell me some setting to get better speed? like frequency or something else?
Should i order tenda ac10 or this one???
My isp recommended me tenda ac10
@@Hmm-bf2tw go for tenda ac10... it is good.. btw both are same
Bro does this wifi req monthly subscription or recharges plz tell??
Yes it’s a postpaid service
i have bought ! i couldnt find mu mimo option on wireless settings! even i have seen advance tab > wireless but there is option for mu mimo! can u tell me how to enable
Go to Wireless>Wireless settings>5Ghz>Enable MU-MIMO
@@TechRacer tq so much brother
Is there issue of frequently disconnect and reconnect?
Bcz mine is doing the same
Not at all, very stable connections, I have like 12 devices running simultaneously all the time, try resetting it once, or check the client device once
I am facing same issue. Any fix you got?
Same issue with C6.
Disconnection issues xan occur if you use the two routers or modem simultaneously in wireless router mode
In same network
If you have fiber ont and want to use tplink and that simultaneously
Use tplink in acces point mode it will fix the issue
Or disable ont and use router
What's the present status of this router? Please confirm, if i should buy it ot not?
Yes you can buy it, working very good no issues
RJ 11 WAN cable ( internet service provider) which I am using currently for my I ball 150 router. Can also be used for this Tp link Archer c6?
Well RJ 11 is a telephone cable, and RJ 45 is a LAN one, no you cannot use RJ11 in this router for more info watch this video ruclips.net/video/DbIkHCtHuiQ/видео.html
Did you have a problem of Double Nat
are there any good Wifi 6 routers? Because this doesnt seem to be a Wifi 6 capable one
Bro... can we setup a router without the help of the ISP providers ?? Don't we need to contact them to change some settings on their end ??
No you don't need, you can setup yourself, because the ont is setup by them and this can be done by you
How much better is tp link archer AX1500 than this tp link c6 router??
Excellent demo.. Plz guide .. I am a old age non tech person .. can I procure this for BSNL fibre connection - for wifi - smart tv - wifi laptop use? they are telling some dual band G/EPON ont router - for bharat fibre which is very very confusing. If possible plz guide
Yes you can get the one from bsnl also, but the performance will not be equivalent to tplink for sure, if you get some price cut then go for single band and add this tplink as extender else it will work with the other one as well.
How to set limite others divides please help me Tp link Archer C6 AC 1200
Does this router support FIBRE OPTIC? Hoping your reply soon
No, only RJ45 input
Dear can we use another 3rd router and connect it from the 2nd router the same way?
Yes, but then you have to use it in the access point mode, else it will create double NAT problem
I have 30 Mbps fiber connection which one is the best router to buy???? please reply asap as my present router is not working with fiber properly...
If you want fiber ONT I would suggest to ask the ISP it self, if you want secondary router for 30mbps then dlink dir-615
Hi man, I got my Archer C6U a few days back but I am unsure if it has OneMesh technology (which I am afraid there is not). Can you please confirm? And kudos to you for replying to all comments even now.
Thank you, well it does support one mesh but the only condition is that you have to pair it up with other one mesh device only, so you need to buy other router or repeater which supports one mesh.
@@TechRacer wow so in basic it actually effectively doesn't support it.
Yes, technically you should have couple of those one mesh devices to gain those benefits.
The thumbnail is🤯
Bro which router do you own from the below links?
1. Archer c6
2. Archer c6 (US)
Archer C6 US v3.2
Great video bro.. Just 1 question.. Bro I have a 100 Mbps plan. Currently I am using a D-Link N150 router and getting max speed approx 20-25 Mbps. My ISP told me to get this one.. How much speed can I expect using this on both 2.4ghz and 5ghz bands?
Okay, you can have about 90+mbps on 2.4ghz and 100+mbps on 5ghz, you can checkout speed test videos as well for better understanding
@@TechRacerThanks, is this speed specific to using a fibre optic setup or without it as well
Mostly specific to fiber only, because I doubt if any other medium has this speeds
If a broadband plan offers 100Mbps, is it really possible to get more than 100Mbps speed?
Yes mostly, because they usually keep 10% speed as buffer so user gets what promised, for eg Airtel, BSNL( if good line) whereas jio strictly sticks to the speeds as per my knowledge.
Hello dude can you make a full
comparison video of tenda ac10 version 3 router vs TP link Archer C6 version 3 router
I'll try to!
Bit confused about buying archer A6 v3 or tenda ac10
Can u help as it says that range is better in tenda ac10 ??
Well it totally depends upon the type of area, if you have less walls may be better than others, but in terms of rest functionality, build, UI, features, reliability definitely archer c6, although not commenting about tenda as I haven't used it but, archer is good option
Bro what’s the difference between AC 1200 MU-MIMO & AC 1200 ? apart from USB port
Yes technically, rest almost features are same, except the USB.
I have configured with PPPOE and made all the necessary settings. But whenever the power goes off and comes, my wifi network gives a prompt to connect or not. It doesn't ask for password. What settings has to be changed in order to remove the prompt?
Complete the setup, login to router go to advanced settings, and check under internet if the connection mode is set to auto if not set it and try again
Hey! I have a bsnl optic fibre connection (60mbps plan). I am using a 2.4 ghz router and getting a speed of 35-40mbps. Speed is good but high ping in gaming and less wifi coverage area. I am going to brought this tp link router. Will it get 5ghz by connecting it to old 2.4 ghz router?. And also will get good ping in games and more coverage area.pls reply.
Yes for speed definitely you will get better, but ping depends upon your connection.
@@TechRacer thanks
Hi. There are 4 LAN ports but the indicator lights for those LAN ports is one, then how will we able to find if any one of the LAN port stops working? Pls reply
Yes, through app or config page because no other indicator for the same
@@TechRacer thanks for your reply. Is this router suitable if i take minimum of 1Gbps download and 1Gbps upload connection? Pls reply
Yes, you can but keep in mind 1gbps speeds are possible on wired connections on wifi you will get upto 600-800mbps throughput, for better wifi go with wifi 6 routers.
@@TechRacer thanks for your reply. I am confused with the terms 867Mbps at 5Ghz and 300Mbps at 2.4Ghz, what they mean? And what the term gigabit port trying to indicate? Pls reply
Here's the mu mimo advantages,MU-MIMO is an innovative breakthrough that enables simultaneous communication to multiple devices, improving overall speed and enabling network multitasking.is it ?🙂
hi...i have one question...will the 5ghz network work within 10-15 feet??? whats the range of the 5ghz network
Not really it goes above that as well, depends upon the number of obstacles in between, I could easily get it in the room exactly below above and aside of the router
Awesome video bro, I have a plan for 300 mbps (act storm), so will I get full 300 mbps speed in this router like I get when I directly the ethernet cable to my laptop??
Yes, for sure but only on 5ghz band
Plz suggest ups for this router
When you have competition with neighbour
Can I buy this or go with D-Link DIR-825 AC 1200 Wi-Fi Dual-Band Gigabit. Its for household
Yes you can go with it as well you get a usb port on it, it's a good router
@@TechRacer can u specify d link or tp link
Both are good routers, if you need ftp storage go with dlink else see where you get better deal in terms of price.
Hi, My main bsnl fiber router is 2.4 ghz . Suppose i buy this router and connect it to my main router using Lan in bridge mode , will i be able to get dual band functionality? i want to ask can i just use my main 2.4ghz router as modem only and this as wifi router with dual band? please reply,
Yes, that's what I'm also doing, you watch the other video on my channel for the same
@@TechRacer thanks for replying bro. You cleared a big doubt in my mind. Liked and subscribed.
Is it possible to detach the antennas for packing the router? The antennas look fixed to the unit.
No, they are completely fixed, you can fold them accordingly
Bro can we use syrotech router as converter from fiber to ethernet so that we can directly register our connection in tp link router
Okay for that you need to configure you syrotech into bridge mode so that you can setup pppoe on tplink
Have you buyed from Amazon or flipkart?
In Amazon is not showing v3 in title
From Flipkart, yes the picture is of v2 but they are delivering v3
do we have to keep the LAN cable connected for internet or we can disconnect after setup?
Yes always, from ont to router
The link mentioned for flipkart is for ver 2, could you please share the correct link for ver 3?
Yes it's for v3 only, the pictures are of v2 but they deliver v3, I used the same link
Which is better ?
TP Link C50 AC1200 or D Link DIR 825?
I’m planning to buy but very confuse. Please help
C50 is non gigabit whereas dir 825 is gigabit
@@TechRacer how many devices can be connect on DIR 825?
@@TechRacer thanks a lot
Most of the routers now a days supports more than 30 clients at a time
Did you face any issues with this version , like disconnection, random reboots, slow speed on 2.4ghz like that ? Please share any issues you faced
No issues like rebooting, for slow speed on 2.4 try changing it to 40mhz
@@TechRacer I see, so v3.2 is better i guess ?
Yes, so far no issues
@@TechRacer Thanks for replies. Appreciate it
Btw from which site did you get v3.2 ?
Can we use WLAN port to create as an access point with this router and if so how
Yes, during setup select the acces point mode.
Bro I have same router and the problem is my asus max prom m1 do not show 5ghz but rest of my family members mobile shows 5ghz and 2.4 ghz... But for my my mobile shows only 2.4ghz...any idea why my mobile do not show...??? Can u help me?
Check if it support dual band wifi
@@TechRacer where to check bro?m not that tech savy
Google it
Your phone doesn’t support 5ghz band.
Plz give your modem's link
Please bro tell tp link archer C6 v3 WDS bridge option have or not
Yes, it does have
@@TechRacer ok bro thanks
This video helped Alot... Great Work bro... Keep it up...♥️
How is your ping is too low? Can you please give any tips for that?
Well basically I asked them to have my connection line directly from distribution box, so no intermediate filters or splits.
I have c5, its really fucked up. I can't even upgrade it's firmware cuz its not avaliable in the Indian website of tplink
Bro isko antenna lgake use kr skte hai kya hmaare area meim fiber cable nhi hai abhi
Yes, if you are talking about wifi extender, else no only lan input available
Bro what is you Internet Speed You Purchased from Vendor
100mbps
Thank u for the unboxing, greetings from Mexico :D
TP link archer C6 AC1200 vs A7 AC1750.. which one should I buy ? I have 150Mbps ACT Fibernet connection
Well both are of different category, if you have so many simultaneous devices working then go for ac1750 or else ac1200 would be better.
@@TechRacer Suppose I have one 4k TV, 2-3 laptops and 3-5 mobiles to be connected... In such case is AC1200 sufficient ?
Yes, its sufficient I too have almost same set of devices at my place and it's working fine
@@TechRacer Ah thank you !
@@TechRacer Oh also, why do many people switch off the smart connect feature ? I mean, isn't it good if the router can automatically switch to the better network when I'm closer to it ??
Did you configure the TP-Link as an Access Point? I'm using JioFiber. Will this work?
No in the router mode, because I disabled it on ont, yes you can
@@TechRacer Thanks!
I have a 200Mbps bsnl fiber plan. Should I go for this router or any other router. Please reply. Currently I am using digisol onu/ont wifi router. And i am getting around 110 Mbps average speed on direct LAN connection. Wifi speed hovers between 80 Mbps. 😭
Try plugging the LAN cable to port 2 , yes you can get this router it will work, but first check if you get 200 on port 2
@@TechRacer dude its connected to Port 2 only and I am getting download speeds around 120 Mbps ans Upload speeds around 130 Mbps.
2 other devices are connected to WIFI as well.
Should I go for this router? Will it improve the speed?
Okay, then there might be problem from BSNL, if the connection cannot pull 200 then it would be same even if buy this router, best would be to first check with BSNL for this issue and once it resolves go for this one, it will work.
@@TechRacer thanks buddy
Please bro WDS BRIDGE connection & speed test review upload please please please
Can we remove the plastic film that is present on the antennae.Does it affect the performance?
Yes, you can I too removed it, no it doesn't affect any performance
@@TechRacer thank you bro
This router TP link C6 V3.20 support with BSNL Fibernet and ACT Fibernet bro? I mean both ISP.
Yes, I'm using it with BSNL
@@TechRacer
thank you
Does it support Airtel 30 Mbps copper connection not fibre ?
What transfer speeds do you get from a LAN-connected device to a WIFI-connected device?
Like an FTP?
@@TechRacer Yes, FTP or SMB.
@@TechRacer speed on FTP please ?
Ek question hai mera Filipkart pr 3 US version available hai kya amazon pr bhi wahi hai suggest me kaha se Buy karu
Kahi se bhi kar sakte ho abhi mostly v3 hi stock me hai, maine flipkart se buy kiya hai
Does it support bsnl fiber net, because am planning on buying this modem. Do we need to buy and extra converter for this modem to work ?
Yes, it does work, only thing is that you should have an ONT already, more info watch this: ruclips.net/video/dBnGNPzLtCA/видео.html
@@TechRacer do I need to buy an ont converter separately
Yes if you don't, mostly if you have working connection then you have it already, so you can go with this
@@TechRacer am planning on putting bsnl fiber net.... does bsnl provide the converter
Yes they provide it, but it is not that good so I too preferred this
can we use it as a range extender wirelessly?
Yes wds is available
Hello, can you suggest tplink a6 v3 or tplink c6 is better?
And are these virus protected?
I would suggest C6 as I used it, well as far as features goes everything is almost similar, not really only network protection services
Where can I see the version details. Which version is good?
I don't see version details in Amazon
No it's not specified on Amazon, but mostly V3.2 is only available everywhere, V3.2 is better for obvious reasons like design and other features.
Hello Tamivani
The link u provided for TP LINK C6 is V2. I'M searching for V3.will u provide C6 V3 link?
It's v3 only I tested just now
@@TechRacer i saw 2 questions abt version.they asking seller abt which version they r selling . & they replied " V2".i hv screenshot.
Well If you ask about flipkart when I purchased the picture was of v2 and they shipped v3 as you can see, go with amazon they will definitely ship v3 because v2 is now a days is almost out of stock
@@TechRacer ok.i ordered it yesterday (from above link).lets see.wt will they deliver .btw vey useful content .best wishes
@@TechRacer yes.yes.yes. 3.2 .tysm bro❤️
TP-Link Archer C20 AC and TP-Link Archer C50 AC kon sa routr lu .. my budget is 2k
If you have or planning to have broadband of above 100+mbps then probably you shouldn't buy but these, go for a gigabit router or you will end up getting less speeds, if you have plan with less than 100mbps speed you can go for C50.
For more detailed explanation watch this: ruclips.net/video/y_knA0-C7Tw/видео.html
How much did you pay monthly for 100mbps plan?
799+GST
Does it has vpn client with openVPN??
Why are you getting more than 100mbps speed on 100mbps plan 🤔
It's from ISP side, well with bsnl you usually get a bit more than promised (in case of fiber)
@@TechRacer This router TP link C6 V3.20 support with BSNL Fibernet and ACT Fibernet bro? I mean both ISP.
Bro can we use it directly I mean without modem or we have to connect aa modem
No, modem is needed
@@TechRacer me samjha nhi you mean modem is needed na!!
Yes the ont modem is needed we cannot use this router directly for any connection type.
Where to buy Amazon or flipkart
Reply fast
I will place order now
Where you get a better deal, go for it both are good
@@TechRacer c6 or a6 reply fast
Archer C6