Thanks for all these priceless experiments in the woods Buckin! That 562 is a ripper, we are blessed you take us along on your adventures! The glasses are a good look on you.
That was one of your best points ever, living in the now. People put so much pressure on themselves thinking about the future or regretting what they did in the past. Live in the NOW, go help your neighbor, go see your mom, play with the kids, watch the sun set. P.S. would make a great buckin tee shirt, live in the “NOW” 😊
Good day, Buckin. I've been running ported and piped 372 x torqs for about 7 years now. I've grown to really like them. Dependable and consistent. I little lighter than the 572 also. They just work for me. 💪
3:50 my wife walks in and the only thing she hears is "I miss my noise, and I miss my crack" lol 😂. She said what in the world are you watching? So I proceeded to tell her about everyone's friend Buckin' Billy Ray.
Hey Buckin! Good stuff as always. I don't know if you remember, but i was out cutting with my x torq a couple weekends ago during the live feed and i mentioned you should have Donny give it a tickle. I knew you wouldn't be impressed with it. Mine is a lot better after a bit of port and piston work, and a pipe. Also, the 562 punches well above its weight! I'm looking forward to the mods on the x torq. Take care!
Love the review! Still love these saws. Have two. My mufflers are ported and typically takes 8 to 10 tanks to loosen up as you know. Will be excited to see you get it running better!
One of the most helpful things I learned from you back in the day, when I first found this channel, was: Live in the Now. Still doing it, and still moving forward 😊✊🏻❤
Cool video Bill, I've been heating my house in northern Alberta for the last 10 years with a stock 365 X-Torque. Pretty much every time I run it I think about getting it modified, but its been so reliable I'm somewhat reluctant to mess with it.
I've worn glasses since about 5th grade and have had at least 100 pairs of glasses ( prescription and sunglasses and safety glasses) and some of the most dorky glasses are the most comfortable. 🤓
Like your videos and you are good at explaining things... whenever I try and teach others I always end up sending them your videos because I am not good at explaining...
Great to see you on the saws Buckin. Good start to my day. Got bad shoulders at the mo. But managed to start my 350and 576 just to warm them up and play a wee bit. Couldn't start the 395, too much compression, it'll come. Good video. Cheers from HB.
Good afternoon sir!! And fellow army!!! Cool video...yessir, I had to port and muffler mod mine to get er to pop, and changed out the ignition as well...she runs out strong now brother😊😊
Howdy mr.bucken, your modified sure sounds great man,might start looking a piped muffler for my new 572,but it's the stihl bar that makes them huskys look like they are going to the dance!!😅lol,and yes the now is where we need to ride,the past is depression and the future is anxiety so you miss out if you aren't in the now,good stuff as always here thanks for ringing in kind sir,pleasure!!Sierra.John
Billy Ray Smith ❤ You are one of a kind Seriously You don't give what you don't like! Am french so i can't express like i what but ...i think you got that
You know I've come to the conclusion that just like a mere human being everything has to modify their behavior to make the best of things. Just like that saw in your hands it just needs a few changes to make all the difference. You can pretty much modify something to meet your needs, when it comes to human nature it just seems to take a moment longer to sink in and that's a revelation.
I love the way your saws sound once you put a muffler on them. They sound so awesome. I’m trying to find someone reputable to do one for my stihl 661 magnum. Would love to do a ram horn on it
I made a straight pipe for my modded 661 and I buried a 32” bar with on a maple chunk and it barely slowed down at all. Other than being noisy as can be I love the straight pipe on my saw and I plan on making another one when I buy a new saw
I have a redmax 7100 which was a jonsered 2172 and it used to do the same thing the sluggish thing I tuned it out I live in east tx so don't have anyone to make me a muffler like u run so had just listen to what it was doing in the wood and adjusted carb to where it got the snapping into it
Much agreed with the two saws the 562 xp is much sassier than the other looking forward to seeing what the saw performs like once Donny is done with it . When Donny does his thing on a bran new saw like that does it immediately cancel the warranty? Great video be SAFE!!
Yep, it is not a secret, in order to get more air and fuel in, gotta get the exhaust out faster. Port and polish and open headers. Makes more go power. Now, can we figure out how to bolt on a supercharger😮
If that saw was bone stock, it ran pretty damn good for that big of a bar. Probably not going to find any other stock saw of the same size do any better.
I ALSO have a 372XTork from 18. Mine performs better with a very generous muffler mod that I personally performed, and it was my very 1st one to EVER do. I’m impressed with it. Mine “will” pull a 32, but it likes my 30 much better! Yes I MEAN 30. It’s an odd size BUT even Stihl offers a 30 from their catalog in THEIR name as an OEM part. It’s ONLY available as an 063 and not an 050. For 050 for it you’ll have to go to Oregon bars, like I did for my 372.
@@ToddAdams1234I don’t think that I will be making my own exhaust for anything in the near future. I do have a 28” Oregon bar that I use with this saw in addition to the 24” & 32” bars that came with the saw. Maybe I will have to pickup a 30” next.
@@johnrosier1686 I just started mine with an OE “jungle” muffler and THEN I made it how I wanted it. It’s a sweet performance upgrade after some simple changes.
Buckin, im a young man that’s never bought a brand new power saw before and I’m looking into getting a 70cc ish saw. I’m looking at the new 372xtorque and the sthil 462 with the regular adjustable carburetor. I’m used to running my grandpas 25+ year old husky 50 that’s still getting the job done but I’d like a bigger firewood saw that I can have around for the next 25-30 years. What saw would you suggest out of the two? Thanks.
Just comparison one cord of firewood suppose to be 3,625m³ (metric cube)?? therefore we do sell cord of splitted silver birch @ 210€ which is 310 Canadian Dollars and pinewood goes out within 245 Canadian Dollars. How does that compare to BC or other parts of Canada? I'm kind of curious 😊
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Thanks for all these priceless experiments in the woods Buckin! That 562 is a ripper, we are blessed you take us along on your adventures! The glasses are a good look on you.
haaa it is my pleasure
Can't wait to see that 372 run after Donny Walker wakes it up... Buckin life is good...
That was one of your best points ever, living in the now. People put so much pressure on themselves thinking about the future or regretting what they did in the past. Live in the NOW, go help your neighbor, go see your mom, play with the kids, watch the sun set. P.S. would make a great buckin tee shirt, live in the “NOW” 😊
Love ya David
Nicely said, David ☺️
There's so much enjoyment in the little things 🌿. Tomorrow will take care of itself ❤️
Love the 372, we've been running them years, those and 346, best saws ever.
Two of huskies finest
Good day, Buckin. I've been running ported and piped 372 x torqs for about 7 years now. I've grown to really like them. Dependable and consistent. I little lighter than the 572 also. They just work for me. 💪
Buckin, thank you for everything you do for this community. Stay safe and be blessed 🙌
Thx Rusty
3:50 my wife walks in and the only thing she hears is "I miss my noise, and I miss my crack" lol 😂. She said what in the world are you watching? So I proceeded to tell her about everyone's friend Buckin' Billy Ray.
Real nice to see you and walkers relationship. Saw dudes that know . Right on 🇦🇺✊🏻
lots of history there friend
Buckin did some recipient of kindness work today boy it feels good
Love it
I love the hat
Happy birthday Donny!🎉
Donny should I trade my Ms 311 for a husky 55
Second that 👍
Thx
Hey Buckin! Good stuff as always. I don't know if you remember, but i was out cutting with my x torq a couple weekends ago during the live feed and i mentioned you should have Donny give it a tickle. I knew you wouldn't be impressed with it. Mine is a lot better after a bit of port and piston work, and a pipe. Also, the 562 punches well above its weight! I'm looking forward to the mods on the x torq. Take care!
I been wanting to purchase a new 372 but been hesitant. I tell you what, I mainly run an ole modded 266 XP and it still puts a smile on my face.
i want to live in the now Buckin! Getting to far away from the now leads to distractions. love you my friend!
Love the review! Still love these saws. Have two. My mufflers are ported and typically takes 8 to 10 tanks to loosen up as you know. Will be excited to see you get it running better!
One of the most helpful things I learned from you back in the day, when I first found this channel, was: Live in the Now.
Still doing it, and still moving forward 😊✊🏻❤
We love you Helga
great show of what some mods can do. Love it.
Glad you enjoyed it
Really resonating with your message buckin thanks for sharing
Cool video Bill, I've been heating my house in northern Alberta for the last 10 years with a stock 365 X-Torque. Pretty much every time I run it I think about getting it modified, but its been so reliable I'm somewhat reluctant to mess with it.
I've worn glasses since about 5th grade and have had at least 100 pairs of glasses ( prescription and sunglasses and safety glasses) and some of the most dorky glasses are the most comfortable. 🤓
Hahaha, that's the word I was looking for 😄
Whatever works for you, right? ✊🏻
Love from another owner of functional stuff ❤️
Like your videos and you are good at explaining things... whenever I try and teach others I always end up sending them your videos because I am not good at explaining...
I appreciate that!
Great to see you on the saws Buckin. Good start to my day. Got bad shoulders at the mo. But managed to start my 350and 576 just to warm them up and play a wee bit. Couldn't start the 395, too much compression, it'll come. Good video. Cheers from HB.
I know the feeling
Buckin billy ray that 372xp x-torque sounds good and cut real good 😊❤
Good afternoon sir!! And fellow army!!! Cool video...yessir, I had to port and muffler mod mine to get er to pop, and changed out the ignition as well...she runs out strong now brother😊😊
Good stuff
Even without a muffler upgrade it was cutting pretty good. Nice saw👍
Right on
It’s smooth Marto
Cool video buckin, i noticed with my 372 x torq once i got it broke in it really found its crack. Just my experience, keep the chips a flying 💪
Right on
That saw looks massive after watching you run the 562 so much
Good afternoon Buckin great video
Love your channel and I changed all my bars to long bars 28 s and 32 s
Great
I got a 372 x torq with a 28” Oregon for $400! Runs like a champ!!
I have a stock 372. Runs great. Never ran a modified saw. Not a production guy here, but love the 372.
Absolutely awe-inspiring performance from these behemoths.
Always happy to listen
Thanks Buckin
Love ya
"Donny Walker on the scene!!!"
Epic video with the giants of the powersl saw world!!!👍💪
Love you all.. ❤❤❤
Lieutenant Bradley
Thanks for running the Husky saws again, always been my favorite
Mine too!
❤Hello Buckin . Love the video . I can hear the difference in the saws when you make changes
mee too thx
Stand up and buck!!
I feel ya man
Doesn't matter the size of the wood...
I understand now❤
Howdy mr.bucken, your modified sure sounds great man,might start looking a piped muffler for my new 572,but it's the stihl bar that makes them huskys look like they are going to the dance!!😅lol,and yes the now is where we need to ride,the past is depression and the future is anxiety so you miss out if you aren't in the now,good stuff as always here thanks for ringing in kind sir,pleasure!!Sierra.John
Billy Ray Smith ❤
You are one of a kind
Seriously
You don't give what you don't like!
Am french so i can't express like i what but ...i think you got that
Bucken you are a good man
Buckin man you’re a beast I enjoy my chain saws too
You know I've come to the conclusion that just like a mere human being everything has to modify their behavior to make the best of things. Just like that saw in your hands it just needs a few changes to make all the difference. You can pretty much modify something to meet your needs, when it comes to human nature it just seems to take a moment longer to sink in and that's a revelation.
You are a true hot rodder and i love it, we all do😀
I know right lololol😊
Nice Intro, perfect weather and like orchestra chainsaw Musik 😄👌💪🌶️ 😊
Love your old school style buddy
Alex😊
Nothing like coming home from Treee cutting all day and still watching your video🤘🏽
I run a MS 660 and love it
Ohhh... That's a nice touch you have there bucking, might be why they call you Buckin'.
He he
It's really very nice to hear your thoughts.
Thank you
Can’t wait for the live draw on Sunday buckin
Do we have to sign up to win or just attend the live stream?
@@EmmaEdinger-wb6jsIf I'm correct, every $25 of merch purchased through his website is an entry in the drawing.
Crazy you mentioned the 86er. I literally just asked Mr walker about it right before I watched this video
Can’t wait to see that 372 wake up and come alive! Love to all hope y’all’s have a great week!
She’ll wake up when he’s done with it!
I love the way your saws sound once you put a muffler on them. They sound so awesome. I’m trying to find someone reputable to do one for my stihl 661 magnum. Would love to do a ram horn on it
Glad you like them!
Watching your videos has given me a whole new direction to go with chain saws and wood cutting and I thank you.
I made a straight pipe for my modded 661 and I buried a 32” bar with on a maple chunk and it barely slowed down at all. Other than being noisy as can be I love the straight pipe on my saw and I plan on making another one when I buy a new saw
Can’t wait to see the walkerized xtorq 🤓🔥🔥
Bucken you are a good fellow
Morning buckin👍
Donny Walker in da house! Nice 😊
Someone will get a really nice saw 👌🏻
Have a good day, everyone ❤️
I have a redmax 7100 which was a jonsered 2172 and it used to do the same thing the sluggish thing I tuned it out I live in east tx so don't have anyone to make me a muffler like u run so had just listen to what it was doing in the wood and adjusted carb to where it got the snapping into it
Much agreed with the two saws the 562 xp is much sassier than the other looking forward to seeing what the saw performs like once Donny is done with it . When Donny does his thing on a bran new saw like that does it immediately cancel the warranty? Great video be SAFE!!
Yep, it is not a secret, in order to get more air and fuel in, gotta get the exhaust out faster. Port and polish and open headers. Makes more go power. Now, can we figure out how to bolt on a supercharger😮
Belt drive, or gear drive?
@@jonmccormick6805😂
Thank you for a great informative video.
I have been feeling angst because I have not been focusing on my talent and following my heart. Started today and I am so much happier
dont hide yer light friend
Like your glasses. I tolerate my helmet, ear protection and face shield. Enjoying this video. Is that the saw that went to Nova Scotia?
Awesome thanks
I would love to win a ported saw and a Donny walker would be legendary
Cutting cookies off the stump. The few times that I've tried that, nothing was level. Time for some practice.
It seems lazy, quite looking forward to the mods. The 562 seems to behave way better stock. Thanks for the video Buckin!
Welcome
Buckin! haven't seen any MAC love in a while. Are you a husky guy now! miss the old MAC videos and tips!
If that saw was bone stock, it ran pretty damn good for that big of a bar. Probably not going to find any other stock saw of the same size do any better.
Cool poulan hat buckin!
Thx
How do I get a chance to get a saw from you??? Been looking for my first good saw.
You going to make somebody very very happy man❤
wow pullin hat an elton jane glasses.make sure christeen reads this one.just sayin haha
What is your opinion on the Husqvarna Rancher 460 with a 24-inch bar? Are there full wrap handles for it and can it be moded?
I have one of those 372s. Mine is still stock and I was wondering if you have a recommendation for an exhaust.
Thanks for the video.
I ALSO have a 372XTork from 18. Mine performs better with a very generous muffler mod that I personally performed, and it was my very 1st one to EVER do. I’m impressed with it. Mine “will” pull a 32, but it likes my 30 much better! Yes I MEAN 30. It’s an odd size BUT even Stihl offers a 30 from their catalog in THEIR name as an OEM part. It’s ONLY available as an 063 and not an 050. For 050 for it you’ll have to go to Oregon bars, like I did for my 372.
@@ToddAdams1234I don’t think that I will be making my own exhaust for anything in the near future. I do have a 28” Oregon bar that I use with this saw in addition to the 24” & 32” bars that came with the saw. Maybe I will have to pickup a 30” next.
@@johnrosier1686 I just started mine with an OE “jungle” muffler and THEN I made it how I wanted it. It’s a sweet performance upgrade after some simple changes.
Yahoo more wood!
Very funny glasses 😂
Buckin, im a young man that’s never bought a brand new power saw before and I’m looking into getting a 70cc ish saw. I’m looking at the new 372xtorque and the sthil 462 with the regular adjustable carburetor. I’m used to running my grandpas 25+ year old husky 50 that’s still getting the job done but I’d like a bigger firewood saw that I can have around for the next 25-30 years. What saw would you suggest out of the two? Thanks.
Wow! Dead nuts even stock vs. pipe giving up the 10cc's.
interesting eh bear in mind 32'' 28' and the 72 is stark raving new
What does Ewan think about all of this Husky stuff? Chime in, buddy!
God bless Ironhorse!!
why not a husky bar on a husky saw ???????
Because that Stihl bar is the lightest “lightweight” on the market currently.
Would you find husky saws better than sthil saws?
I'm considering a 562, echo 620 and echo 680 to run 28-30" bar to cut firewood. Leaning towards 620
Ohio? So hardwood? If you really want to pull a 28"+, I would go with a 70cc saw.
Good Tuesday friends let’s lift up people
Yes
Good evening everyone
And a lovely day to you, my friend ☺️❤️🌲🌳
Just comparison one cord of firewood suppose to be 3,625m³ (metric cube)?? therefore we do sell cord of splitted silver birch @ 210€ which is 310 Canadian Dollars and pinewood goes out within 245 Canadian Dollars. How does that compare to BC or other parts of Canada? I'm kind of curious 😊
Dear buckin,the glasses are kind of a fashion risk.😮
im a risky guy😂
Buckin we want 572 vs 372 in wood and your personal opinion
X-torx killed the 372, og was a beast
would be a great update to my 357 xp and a big Hi from Denmark
Hello
Ahwoooo get one 👍
Ahwoooo 😄
Donnie in the camp
be kinder!
I’m tryin’
Hey friends and Buckin-also a friend, where can I get an exhaust for my stihl ms391? Thanks
do you know of anyone that is making a pipe for the ms261c I would like to put one on mine
Jason Egan...
Husqvarna 372 b e s t
They are fast for skip tooth
Donnie!!
When serious whit those glasses....
They are on your coast by aware
Did you get those glasses from a guy who lives in a van down by the river? 😂
Lol, I think he got em off a guy in Sunnyvale trailer park.