DIY Jet Ski Headsets - FodSports MS1 Pro Intercom
HTML-код
- Опубликовано: 1 окт 2024
- Here is How I DIY attached FodSports MS-1Pro Bluetooth Intercom Headsets to some ear protectors. These are great Intercoms for the cost. I tested them out 4 times and my experience went beyond my expectations.
For more details:
htttps://www.fodsports.com
Discount code - Alvean12
#Seadoo #Yamaha
⚡️Please LIKE, COMMENT, and SUBSCRIBE......⚡️
///SOCIAL MEDIA LINKS///
/ alveanazurin
/ alvean_azurin
/ alvean-azurin-20786839...
teespring.com/...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If anyone is looking for a jet ski cooler / fuel rack go check them out, they offer a rack for all skis and even to custom jobs if needed.
www.PwcSuperRa...
Use “ALVEAN10” to get a 10%off discount
SURECAN FUEL = amzn.to/2DxUG4L
____________________________________________________________________
CAMERAS:
Insta360 = www.insta360.c...
Insta360 OneR= amzn.to/3fK6eid
GoPro Max 360 = amzn.to/2EWPzvc
GoPro 8 = amzn.to/3imKlaw
Starter Kit = amzn.to/3ilIfHV
___________________________________________________________________
SUNGLASSES 🕶:
www.blendersey...
Discount Code: Alvean16
___________________________________________________________________
GEAR:
-Jet Pilot Vest, Seadoo pullover vest, Seadoo Air Flow,
___________________________________________________________________
Houston Jet Ski / Extreme Jet Ski / Xtreme Jet Skiing / Texas Jet Ski
Sea-Doo Spark Trixx Life Vest, Life Jacket, Seadoo, Spark Evo, Gopro Hero 8, Gopro7, FLSkiRiders, Florida Ski Riders, Riva Racing, Jet Ski Life, Waverunners, PWC, Kawasaki Ultra, Yamaha, Honda, iPhone 11 Max, Apple, 2020 Seadoo GTX 300 Limited, 2020 Seadoo Spark Trixx, Turbo, Boosted, Boats, PWC Super Rack, SureCan, Ocean, River, Bayou Riding, Lake, Fails, Funny, Seadoo Accessories, Drone, DJI, Insta360 One X , Insta360 One R, Yamaha FX SVHO, Yamaha FX Cruiser, Yamaha VX, Yamaha GP1800, Yamaha EXR, PWC SUPER RACK, fuel rack, The Watercraft Journal, TFL Offroad, camp chairs, beach chairs, sena bluetooth, cardo pak , cardo bluetooth
Great ideas, and developed new ways of using our products.😍👍
Definitely a great product! We really enjoyed using them and it elevated our PWC experience.
@@AlveanAzurin you should’ve sold them the idea 😂
Great video again and thanks again for putting this together, very informative and very well done 👍
How much did these run you? I am looking for something just like this for the mini boats.
I have these headsets for my wife and I. We use them with our UTVs. That’s a great idea cause I don’t always wear a helmet. Thanks for the video and the idea. That’s Awesome
Great! They are freaking awesome. Glad you enjoy them. 😁
Is it water resistant or water proof?? Im curious because of water spraying with chop might mess it up.
Hey lil lady, being a Bluetooth accessory wonder how well it would do in the thick woods while riding our SXSs and ATVs.
Thanks for this video, it worked beautifully on the water!!! Now how do I wash these headsets, my were soaked with ocean mist?
Three things: 1. No way will that one speaker fit through the cover. Did you use a heat gun or something to soften it? I tore it to shreds.
2. Why did you make the mic connection outside? Why not just tape the plug inside the left muff?
3. Mic won't reach my mouth from earmuff I guess my heads too big lol
Lol.
1.) I made two with these headsets and was about to fit speaker through the head band with some finessing.
2.) maybe I could put it on the inside but would need to put a bigger hole to tunnel it out. Plus there isn’t much space inside after putting foam cushion back inside. I might need to screw it down to hold it better.
3.) lol. Could be. Mic has a lot of space between my mouth to mic. My friends that borrow them don’t have an issue with mic being far from their mouth. Maybe your placement of the base of the mic is further back?
What brands of hearing protection did you use? I assume not all of them come apart or are as low profile as the ones you found.
amzn.to/3rBA4gv
Mine actually came in the mail yesterday. Perfect timing with the video.
Nice! Hope you enjoy them.
Thanks for sharing this. I ordered these parts to make it, but ended up sending the M1S back because the volume was too low. I'll follow this guide using different electronics.
Thanks for this! Did a V6 onto a ball cap couple years ago, worked OK but won't stay on over 30mph. You're idea is great but the fact you reviewed and tested it is outstanding.. We're moving to a 6 set intercom and this will be how we go.
Those would also be great for trail riding if everyone had the same system or other systems would join it
Have the same ones from Amazon, used them for the bikes helmets. Works pretty good
Nice work on the install. Going to install Cardo Pactalk on a pair for us. Thanks for the idea.
This is a great idea. I'm working on a pair for side-by-side riding using the same muffs you used. But, I can't pop the ear muff wire off the plastic band. How did you do that?
I used channellocks. To pop back in I used the shaft of a screwdriver
🤓✌️
Get with someone who has a 3d printer and you can produce the ear cups with what you want specifically for this product. That purple plastic part it should be VERY easy to make with a 3d printer and make it to accommodate anything you want.
Great idea.. let me figure it out.
Just made a pair of these thanks for a great video. 👍
Great video. Will try and make one. Love the idea 💡
Your code just saved me $23.52! Thank you!
Is your video audio coming through the Fodsport mic?
That’s awesome!! I haven’t figured it out yet 😞…
@@AlveanAzurin If I figure it out I'll let you know. I'm impressed with how little wind/background noise you manage to pick up in your vid while you're riding, already, anyhoo :-)
Nice; thanks for the vid
GREAT VIDEO, THANK YOU
Cool channel. I'm glad I found it. Good stuff 👏
Hell yeah 🤘…Thank you.
Cheers for the diy think I’ll be giving these a crack with my mate ,great video as always
Definitely adds to the whole pwc experience. Lots of fun you can have with your mates.
Awesome video!
Making a pair of these! The walkie-talkie system I made sucks...
Let me know how you like it! It worked great for me.
@@AlveanAzurin Will do!
Very innovative🙂
It sounds cool... But what does the authorities say about it? I mean isolating from the possible noise of any boat around you.
Nothing so far. I can still hear other things around me. The wind sound is decreased. I doubt it would be an issue bc sounds are isolated with the sound speaker or even the exhaust.
Just drill several holes in the outer cup to let ambient noise through if you are concerned
Nice! 🤘
awesome video i was wondering how you did this
Thank you 🙏🏼.. I got lots of questions regarding the headsets and luckily I had filmed the install of one of them bc it turns out lots of people really liked the idea.