How to fix GNS3 VM Greyed out , GNS3 VM not getting green
HTML-код
- Опубликовано: 8 сен 2024
- This video tutorial shows you how to fix GNS3 VM is Not Starting or GNS3 VM not getting green.
The following steps have been working almost all the time with respect to the title above.
FIX
==========================================================
1. Make sure you have followed all the protocols to install GNS3 GUI and GNS3 VM.
2. Fix issues with your antivirus and firewall that will usually prevent GNS3 GUI and the VM from playing out well.
When the GNS3 VM indicator in the GUI is not green or is greyed out after starting the GNS GUI and a call is made to the VMware workstation to start the VM do the following;
3. Close GNS3 GUI. This will shut down the GNS3 VM and close VMware workstation pro too.
4. Open Network and Sharing Centre and click on Change adapter settings. This will open Network Connections to your computer.
5. Look out for the 2 VMware Network Adapter (In my case VMnet1 and VMnet8) and disable both of them and enable them again
6. After successfully doing the steps above start the GNS3 GUI and wait for it to start the VM and the indicator now becomes green
No more need for multiple restarts and restoring the Virtual Network Editor to its default
I hope this helps most of you.
Corrected the port setting to 80 and work!
Thanks dear. You video helped me solve this problem. God bless you ❤
you are best my problem fixed thanks bro❤
my problem also fixed...thanks
Nice knowledge bro
good work
Dude! This fixed my problem! THANK YOU!!!
Thanks, it solved my problem ❤❤❤
Thanks for sharing!
works for me thanks for your help
Glad it helped!
Thank you so much
Thanks Galaxiatel!
Thank you so much 🥰
Thanks, really helpful
Thanks bro..
THANK YOUUUU SOOOO MUCH
thnkas!!!!
I install gns3 client and gns3vm in vmware gns3 client calling vm by vm interface ip+3080port vm open and gns3 load and showing vm details in vmware but in gns3 client gns3 vm server showing grey not green. Interface disable enable done, both Vm and client are new version but not working... how to resolve that
Hi @basudebbhanja1144, please go to GNS3 "Server preferences" under the main server tab and check "Enable local server" and use a port that is showing in the GNS3 VM like 80" If it is different then change it accordingly, both GNS3 client and GNS3 VM should have the same port, prefer to use 80. if still not working check if your local machine firewall should not block this port, hope this will help.
❤❤❤
nice
0:09 0:09 0:10 0:10
0:32 0:32 0:33 0:33 0:33
Thank you so much
❤❤❤❤
nice
Thank you so much