You're the man dude! If anyone is reading this that is using the same subnet as your local home network for VMs, make sure you don't cause IP conflicts with IoT devices around your home. Change the router to start leasing IPs at something like 10.10.10.10 onward leaving you IPs to use.
I am getting a destination host unreachable for the gns3vm ip which is under one virtual adapter installed. 1. And gns3 pops a msg "TRY TO RUN...in a terminal to see details. MAKE SURE GNS3 AND VMWARE RUN UNDER SAME USER. 2. Also "CANNOT CONNECT A NODE ON GNS3VM SERVER but the GNS3VM IS NOT CONFIGURED. What could be the solution for this up STATEMENTS?
Hi , When I drag the NAT node to the workspace (using the local computer as a server) on my topology, I am getting following error: "Error while creating node from template: NAT interface vmnet8 is missing. You need to install VMware or use the NAT node on GNS3 VM. Could you please help me to solve this issue. Thanks in advance
You're the man dude! If anyone is reading this that is using the same subnet as your local home network for VMs, make sure you don't cause IP conflicts with IoT devices around your home. Change the router to start leasing IPs at something like 10.10.10.10 onward leaving you IPs to use.
Thank you for all your support my friend!!
After long time the issue has been resolved, thanks sir ji
thank you, I appreciate your comment
thanks,it took me one day to solve it ,with your help ,only 10 mins,i successed.
I appreciate your comment, really thank you
Still the man. Thanks.
Somewhere along the way of an upgrade to Win11 + VMWare 16 killed connection. Your tip to ping the VM address was spot on.
Thank you for all your support, I appreciate
now works fine. Thanks a lot.
I appreciate your comment
Thanks Maan ! able to do now
Thank you for all your support
thanks a lot! very helpful
Thank you for all your support
OMGG GRACIAS DE VERDAD ME AYUDASTE MUCHO CON MI PROYECTO FINAL, ya que habia desconfigurado varias cosas sin querer, pero muchas gracias
Gracias por todo tu apoyo, lo aprecio mucho
fantastic !
thanks
thank you for all your support
Good material. Thanks.
Thank you for all your support
Thank you very much from another Win 10 to 11 upgrader ! Your help was greatly appreciated! Subscribed!
Glad it helped! Thank you my friend
Mine not working after when i config IP in there - still saying eth0 need to config
new versions of GNS3 will have a different solution for this, try this ruclips.net/video/X18WAOSp4YY/видео.html
Hi Christian, could you please tell me how can i have VMnet1 (for host only) it only appeared as VMnet8 when going to my adapter settings.
go to control panel and activate VMnet1 interface or please use VMnet8 instead
Thanks bro u helped me a lot ❤
Thank you for all your support
I am getting a destination host unreachable for the gns3vm ip which is under one virtual adapter installed.
1.
And gns3 pops a msg "TRY TO RUN...in a terminal to see details. MAKE SURE GNS3 AND VMWARE RUN UNDER SAME USER.
2.
Also "CANNOT CONNECT A NODE ON GNS3VM SERVER but the GNS3VM IS NOT CONFIGURED.
What could be the solution for this up STATEMENTS?
please reinstall all again
You are the MAN!!!! Thank you!!!!
You're welcome!
useful, tnx
thank you for all your support
Teriima kasih kak
OMG
This _is_ helpful!
Thank you for all your support
gracias!!1, works for me!!
You're welcome!
Thanks!
Welcome! Thank you
I made like you step by step, but nothing changed and every time I get the same problem ? whats the wrong with me ?
please send me screenshots and details to romeroc42@gmail.com
Gracias amigo!!
de nada, gracias
Hi ,
When I drag the NAT node to the workspace (using the local computer as a server) on my topology, I am getting following error:
"Error while creating node from template: NAT interface vmnet8 is missing. You need to install VMware or use the NAT node on GNS3 VM.
Could you please help me to solve this issue.
Thanks in advance
try to use this method ruclips.net/video/X18WAOSp4YY/видео.html
@@romeroc24 Thanks for your suggestion, I will use this method.
gracias me funciono
Gracias por todo tu apoyo, lo aprecio mucho
thx!
thank you
Thank you!
Thank you for all your support
hi i have followed the same procedure regarding etho error, but still i am getting the same error after doing the procedure, can you help me with that
I received your message on email
@@romeroc24 how to fix
@@sportsboy5935 video show you all
@@romeroc24 applied all the steps as per video still eth0 not configured
@@sportsboy5935 try this another method ruclips.net/video/X18WAOSp4YY/видео.html
deberias hacer un tutorial desde cero usando windows hyper-V y como conectar gns3 al internet paso a paso Felicidades
tienes razón, ya tengo un video desde cero, pero ahora haré otro actualizado
still getting the same error please help
This video may help ruclips.net/video/X18WAOSp4YY/видео.html
not working 🙃
please try this ruclips.net/video/X18WAOSp4YY/видео.html
Nope dosent work
please try this ruclips.net/video/X18WAOSp4YY/видео.html
In version 2.2.17 it's not actual anymore :( But thanks for video anyway
this is for new versions ruclips.net/video/X18WAOSp4YY/видео.html