Finally found this kind of tutorial after a long time. Now it's time to buy a cheap RC on market ($7) and modify it like this and add some decals. Thank Man!
So I got these ESC's and a Flysky GT3C as well. And connected it all up to an old F-250 by New Bright, runs well, change the motors when I want to. And these ESC's are just really good for little cars.
I did this with a toy tugboat. The electronics that were originally in it were coated in beeswax that didn't prevent the main board from getting wet and shorting things out. It didn't function when I got it so I stripped everything out except the original motor and upgraded the electronics to hobby grade. The lights, wenches and everything are run off separate circuits I had to build, but the basic ESC, and receiver set up was easy. I did have to add a servo for steering, but the new one was easily adapted to the existing steering system with minimal modification.
@@JayDrone I believe I did, its on You Tube under RC Hobbiest Extreme. I do have a fireboat I plan on doing next. It's basically the same design but better electronics . The first one was a fishing trawler, not a tug boat. It's called MONICA. You cannot find one anywhere now because they all failed and went to the landfill or recycle. I picked mine up from the local Goodwill for $14. I took a chance figuring it probably wouldn't work( it didnt). The LED lights came on and that was it. I reworked all the lighting, adding spot lights, interior lighting and such. Sadly I fried the wench motor last time I rigged it up due to mis- labeling the connectors to the battery. This winter, I plan on reworking the wench( used for raising and lowering the nets) system. I didn't care for the cheap crappy brushed motor in it anyways. I will replace it with a re- worked servo by eliminating the stops and converting it to a wench motor. There are simple videos on that procedure.
Saw your video, i have a very cheap jada fast and furious car that i modded, i think it has the same insides. I added a 2 in 1 esc/reciever and also a servo. Original it had a 3,7v battery so i upgraded to 2s 14650 900mah.. It is so freaking fast now and thanks to the servo not only donuts but also awesome long drifts, this upgrade is eating the tires hard so i gues i have to find a way to put some descent rubber on it. Thanks for inspiration 👍🏻
Tha js for the video just ordered the esc and the controller with receiver. And gota free rc car from an estate sale can't wait for the parts to come in this is going to be wild. Great video and instructions.
Super easy to do a very effective you’re doing something I haven’t done yet lol. I actually have gone to thrift stores like Goodwill and other oddball places looking for a decent remote control car without the remote thinking you could get it super cheap and then do this modification good luck with the modification again super simple happy video helped
You got it I recently did another one a few days ago showing how to connect two motors to one ESC if you have a 4 x 4 vehicle that runs independent motors ruclips.net/video/i8u89eF4UT4/видео.html
Hey Bro came across your Channel VERY COOL...Question: Do you think a 2004 Toyota Celica (Jada Toys Import Racer) 1:10 Scale 27mhz can be upgraded with a Brushed motor?...I've had ths car almost 20yrs just found it again..want to beat my cousins 30mph R/c
@@JayDrone what Parts would you suggest I get and Cites to grab them from?...And 1 more quest. You think I'll have to change the remote control aswell?
I tried this out but found lots of delay and stalling. I'm using a fs i6x controller (this is meant for fixed wing) but I feel like this isn't the problem because it has no delay with my RC plane. And it should still work with a 2 channel car so idk. I even put the wires on channel 7 which was for switches (their only 100% 0%-100% so everything should be exact and precise) yet it still has a delay. I'm thinking this might be the esc but again idk.If anyone knows why or a fix please let me know. Still great video😊
I was just thinking that if i buy a rastar rc ferrari la Ferrari apreta of 1:14 scale can i make a drifting car from it . The remote thats comes with it . Because its hard to find the remote like you got . It costs too much i can buy 4 cars in that price so is it possible to convert your toy grade car into hobby with the same remote only i can fit esc 20a in it and a servo but i wanna use the stock remote
Omg thank. I've been trying to make a hobby grade servo work on toy grade rc drift but this way I can get proportional steering with factory toy motor. Does one need to remove the spring on the steering trim????
kinda opposite.. if you want semi proportional steering from the bang bang steering motor you'll want a thicker stronger spring, and/or some resistors on the motor leads. definitely better off using a servo, little 9 gram servo's are about a dollar in eBay.
Maybe ya already did, but maybe if you could list all the supplies needed, that would help me a lot. I wanna do this. I went through a lot of jada hyperchargers in the last year. But, I need help to know what all to buy.
Man you're awesome. Planning to mod out my new bright corvette. But i have a question. The flysky controller you have in the description box, it comes with a receiver. Can we use that receiver or do we have to buy a separate receiver?
Do you have to use a compatible receiver to transmitter the transmitter being the remote control that you were using so in this instance you would need again a compatible transmitter to receiver hopefully that makes sense
Not kids watch the video I literally explain everything I’m using you could also check in the comments or in the description I might have stuff linked everything was purchased off Amazon
Unfortunately a lot of his toys are built completely different this was literally to demonstrate how to cut the wires from the main board use electronic speed controllers and have variable speed just as well as the able to use any controller of your liking providing your pair the receiver to the transmitter
You can if you like it won’t hurt anything being in there myself I took mine completely out to wires in the front is for your steering tires in the back is for your motor
Loved the video, it was very simple but explained everything at the same time. I would love to try this out with the 1:24 scale Jada Toys RC Lightning Mcqueen, I just worry that it won't have enough room for the electronics. I already love the car as is, it is great with driving, and its fun, but one; the stock remote is starting to feel more flimsy as I use it, and that proportional throttle would be awesome, because everytime I try to drive him, I spin out on the floor. Would upgrading the Mcqueen mean having to give up the turbo mode though? If that is the case, then I might not do it, but what do you think, is there some way to still keep the turbo mode on the car with the hobby grade remote? Sorry this is so long, but I am fascinated by this upgrade, its so simple, but it makes a world of difference in making a cheap toy car worth the money. (Because they always end up wearing out within a few years lol)
Thank you for the video, but I watched it and I am failing to see how this answers my question, the motor McQueen has has a little board on it, so I'm thinking that is what makes the turbo mode possible, would I just need to give McQueen another motor, and ditch the turbo mode? Or would upgrading McQueen make his turbo mode speed his new top speed by default?
JST back in the day maybe stood for what you are saying. losi, deans, xt30 n xt60 Are also if you Japanese solderless terminals that have their own name
Do you know if this will work for a RC Car that has an electromagnet for steering? I am assuming this car has a servo like more modern RCs but I don't want to bother with replacing the electromagnet with a servo.
If it only has a Plaza Negitive coming off of it then yes it should work but if there’s any type of electronic speed controller in between it and the board and now it will not work
@@JayDrone Just an update that this does work with electromagnet steering. I resurrected a Nikko Lazer RC car from I think the early to mid 90s, that wasn't working (I am guessing because of corrosion on the circuit board). Thanks for the video it helped a lot.
My kid just got the Spiderman remote control car, with 5-10 minutes of playing with it. it started making a grinding sound and barely accelerates and goes real slow. if i pick it up and press the forward, it starts off grinding for a second and then the wheeels start spinning freely and fast without the grinding noise. But as soon as yoi let go or put it on the ground, it starts the very loud grinding noise
The grinding noise that you’re probably hearing is probably a gear gear feed system that is missing a tooth in the year or the year is not making complete contact that’s what I would assume or the motor itself is burned out or burning out
I just ordered everything that you show in the video to make my RC faster. I do have a question... If I use two 2s Batteries (one for each ESC, does my rc car will be faster than only using one battery? thanks for the video!
Trial and error, my friend everything that you have just asked me try every RC car is going to be a little bit different because the guts to them are a bit different
Got the parts in. Hooked it up bind the controller and connected the esc correctly. Is there any setting that the controller need to be set too? I have the exact same controller as yours.
I just did another video like this today something I’ve been wanting to do for a while did it on a vehicle that had two motors front and rear same type of set up though
Just browsing and researching. What exactly did they upgrades do? Did it do the proportional steering and proportional throttle? Thanks y’all sorry for the dumb question
Same way just connect the two driving motors together positive or negative run them to the positive and negative of the ESC and then hook up the steering as shown here
So I did this exactly but my ch1 is not ding anything. The channel two is working . Weird this is when I disconnect one esc from the battery but leave it connected to the esc the lights stay on on both esc? Could it ve a bad receiver?
@@JayDrone yeah I tried that. I just noticed on the receiver it's austin 4-6v but the ad I bought it from says the receiver voltage is 4-14v. So I would asse this is the problem. I tried with a receiver and transmitter for quadcopter and everything works fine. This receiver is 4-10v .
Man awesome video...I need your help. I have a tyco 9.6v twin turbo lamborghini that doesn't run but it's a sentimental thing for me. I wanna get it running again. I wanna do what u just did in video with the esc and wires. I have a 2.4ghz transmitter. Did u use original servo,? What do I need to buy? Plz help
@@JayDrone lol you mean, it’s just for the other motor in the car. The steering motor. Those are tiny little 20a ESCs from a drone. I build those also. But nobody uses those kind of ESCs anymore. Only stacks now. You should upgrade the motor! Doubles the speed. That along with a brushed 60a 3S ESC.... this thing flies like a hobby grade
Obviously if you play around with different sizes you may find a smaller battery may give you a longer run time versus a bigger battery because sometimes certain RC cars in motors cannot take a heavier load and operate more efficiently with a lighter load
Help I have jada toys big time muscle drift car black edition and Brian’s Supra same car just different door kit I wanna upgrade the batterie it already has a 9.5V I wanna upgrade but I don’t know how HELP
great job sir.. but i think your gonna kill your rx.. 2 esc is powering it up.. i suggest to remove 1 power cable on 1 esc to rx (middle one).. that should do the trick :)
Thanks for the video,and i need the same setup you did for a friend of mine, can you list all the parts you used in this video for me? thanks you definitely got a new subscriber.
You’re probably looking at $100 but once you have the remote then to do it to any other RC car you’re probably looking at $30 an RC car and give her check
Please help. I've done this to the t of how u do it. When I wire everything up both ESC blink like yours but blinks faster. I took one of the ESC from one of my wpl rc and I had another one laying around and the I was using worked fine. So after doing this nothing happened. So I unhooked everything and put it back on my wpl rc and now my wpl doesn't work. The steering does but not motor. Any idea what the fast blinking means or why my ESC did work and now doesn't. Please reply asap
You can try rebooting it and see if that works I never had any issues as a shout exactly how to set it up I’m sorry that you’re having issues hopefully you can get it figured out
I think it was the way I made the jumper wire. I had the 2 ESC jumping from one another vs having them ran in 2 sequences. I fried both ESC this way lol
I need some help I have a little project 20$ jada Hyper charger trying to upgrade it I saved a video of the project but it’s private now I bought everything I need I believe I have an soldering and a 18650 battery and holder for it connected it but it’s not working the car still works but I don’t think that the speed changed much there’s 2 modes regular and boost mode in the video that I saw there was 2 18650s installed just wanna start with one please help if you can thanks
It’s really simple just follow this video you’re not gonna get the boost mode you’ll get optimal power and you can also increase the voltage but don’t do too much because some of these cars cannot handle much more voltage than originally designed for one of the Jada hyper cars I have done this too it’s a police car they came with I think in metallic red Camaro the police car I have done the exact same thing I did in this video
Tried and it didn't work. Steering kept going rapidly back and forth no matter what direction I turned. Forward was a bit jumpy, and reverse kept slightly going back then jumping into a jumpy forward. 🤷♂️
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Finally found this kind of tutorial after a long time. Now it's time to buy a cheap RC on market ($7) and modify it like this and add some decals. Thank Man!
Happy vid helped
So I got these ESC's and a Flysky GT3C as well. And connected it all up to an old F-250 by New Bright, runs well, change the motors when I want to. And these ESC's are just really good for little cars.
Is it truely digital propositional steering without servo?
@@maznim1268 Yes
@@maznim1268 noo
I did this with a toy tugboat. The electronics that were originally in it were coated in beeswax that didn't prevent the main board from getting wet and shorting things out. It didn't function when I got it so I stripped everything out except the original motor and upgraded the electronics to hobby grade. The lights, wenches and everything are run off separate circuits I had to build, but the basic ESC, and receiver set up was easy. I did have to add a servo for steering, but the new one was easily adapted to the existing steering system with minimal modification.
Awesome did you do a video on it
@@JayDrone I believe I did, its on You Tube under RC Hobbiest Extreme. I do have a fireboat I plan on doing next. It's basically the same design but better electronics . The first one was a fishing trawler, not a tug boat. It's called MONICA. You cannot find one anywhere now because they all failed and went to the landfill or recycle. I picked mine up from the local Goodwill for $14. I took a chance figuring it probably wouldn't work( it didnt). The LED lights came on and that was it. I reworked all the lighting, adding spot lights, interior lighting and such. Sadly I fried the wench motor last time I rigged it up due to mis- labeling the connectors to the battery. This winter, I plan on reworking the wench( used for raising and lowering the nets) system. I didn't care for the cheap crappy brushed motor in it anyways. I will replace it with a re- worked servo by eliminating the stops and converting it to a wench motor. There are simple videos on that procedure.
Saw your video, i have a very cheap jada fast and furious car that i modded, i think it has the same insides.
I added a 2 in 1 esc/reciever and also a servo.
Original it had a 3,7v battery so i upgraded to 2s 14650 900mah..
It is so freaking fast now and thanks to the servo not only donuts but also awesome long drifts, this upgrade is eating the tires hard so i gues i have to find a way to put some descent rubber on it.
Thanks for inspiration 👍🏻
Awesome ❤️
Its not "very" cheap.
@@blakeg4166 these where spare parts that i would never use again. So for me was pretty cheap.
Thanks for this.. just found a 95 Supra. Guna try it out. Ive done something similar with a 1/8 Escalade.
I did this with a RC plow from Hobby lobby and was able to function the plow as well ruclips.net/video/8WKEHKVkWKs/видео.html
_"Alls I need to do now..."_ 👍✨🏆
I converted my mustang I love the speed control
Cool happy it helped
@@JayDrone oh no I did it before the your video I bought mine solely to modify em just for that purpose.
Tha js for the video just ordered the esc and the controller with receiver. And gota free rc car from an estate sale can't wait for the parts to come in this is going to be wild. Great video and instructions.
Super easy to do a very effective you’re doing something I haven’t done yet lol. I actually have gone to thrift stores like Goodwill and other oddball places looking for a decent remote control car without the remote thinking you could get it super cheap and then do this modification good luck with the modification again super simple happy video helped
Been searching for a video like this thank you so much.
You got it I recently did another one a few days ago showing how to connect two motors to one ESC if you have a 4 x 4 vehicle that runs independent motors ruclips.net/video/i8u89eF4UT4/видео.html
You are....DA MAN!!!
Hey Bro came across your Channel VERY COOL...Question: Do you think a 2004 Toyota Celica (Jada Toys Import Racer) 1:10 Scale 27mhz can be upgraded with a Brushed motor?...I've had ths car almost 20yrs just found it again..want to beat my cousins 30mph R/c
Yes, all toy grids can be upgraded. It’s just how much you have to put into it. Most of them are very simple.
@@JayDrone what Parts would you suggest I get and Cites to grab them from?...And 1 more quest. You think I'll have to change the remote control aswell?
awesome video.. thanks for taking the time. whats the point of binding? wouldnt the radio already be bound to the receiver?
Very dependent on what type of receiver that you get and what type of radio you are using
Man what an awesome video! I wasn't sure if both the esc's needed power or not. Thanks for the help, did a great job!
I tried this out but found lots of delay and stalling. I'm using a fs i6x controller (this is meant for fixed wing) but I feel like this isn't the problem because it has no delay with my RC plane. And it should still work with a 2 channel car so idk. I even put the wires on channel 7 which was for switches (their only 100% 0%-100% so everything should be exact and precise) yet it still has a delay. I'm thinking this might be the esc but again idk.If anyone knows why or a fix please let me know. Still great video😊
Crazy
Never noticed any delays on my end. Sorry don’t know a fix for it.
AMAZING TUTORIAL BRO THANK YOU!
🦾
Pretty neat man. Thanks for sharing that!
u got it
Thanks for vid and links to accessories used - great job!
U bet
I just did this last night, I have a radiolink tx and rx
Nice
This is lit, appreciate the knowledge
I was just thinking that if i buy a rastar rc ferrari la Ferrari apreta of 1:14 scale can i make a drifting car from it . The remote thats comes with it . Because its hard to find the remote like you got . It costs too much i can buy 4 cars in that price so is it possible to convert your toy grade car into hobby with the same remote only i can fit esc 20a in it and a servo but i wanna use the stock remote
Should be doable u will have adjustable throttle just as well staring, where it’s not all left. All right I’ll go all no
Is it truly digital proportional steering without a servo and just the way you have it? I can’t quite tell in your video. Thank you
Omg thank. I've been trying to make a hobby grade servo work on toy grade rc drift but this way I can get proportional steering with factory toy motor. Does one need to remove the spring on the steering trim????
kinda opposite.. if you want semi proportional steering from the bang bang steering motor you'll want a thicker stronger spring, and/or some resistors on the motor leads. definitely better off using a servo, little 9 gram servo's are about a dollar in eBay.
Should I do this with the New bright GT4.R Chevy Camaro? I’m trying to get it to slide for longer but not enough power.
U could
is it OK to solder the two ESC on/off switches to the only use one so i can repurpose the existing mounting hole in the car?
Hmm 🤔 idk 🤷 never did that
thanks so much,learned awsome simple upgrade to dead toy grade
There u go
Maybe ya already did, but maybe if you could list all the supplies needed, that would help me a lot. I wanna do this. I went through a lot of jada hyperchargers in the last year. But, I need help to know what all to buy.
Check discription
I want to add beefy tamiya style 550 motor to my radio shack enforcer 4x4 truck. I converted to 2wd and it was a quicker!
Man you're awesome. Planning to mod out my new bright corvette. But i have a question. The flysky controller you have in the description box, it comes with a receiver. Can we use that receiver or do we have to buy a separate receiver?
Do you have to use a compatible receiver to transmitter the transmitter being the remote control that you were using so in this instance you would need again a compatible transmitter to receiver hopefully that makes sense
tq for this vid ! bless u brother
Subscribed. I just wanna overvolt the battery to get a little more power. What’s in there stock? I’ve overvolted some new bright on my channel.
Hey man what are these kits called and where can I get one
Not kids watch the video I literally explain everything I’m using you could also check in the comments or in the description I might have stuff linked everything was purchased off Amazon
I have a 2015 Mercedes, but I took apart my steering box and I'm trying to put it back together but idk how, jada help center couldn't help
Unfortunately a lot of his toys are built completely different this was literally to demonstrate how to cut the wires from the main board use electronic speed controllers and have variable speed just as well as the able to use any controller of your liking providing your pair the receiver to the transmitter
I have a Big Time Muscle Mustang version, and mine has a motherboard unter a panel where the wires are connected. Do I take that out? Help
You can if you like it won’t hurt anything being in there myself I took mine completely out to wires in the front is for your steering tires in the back is for your motor
Loved the video, it was very simple but explained everything at the same time. I would love to try this out with the 1:24 scale Jada Toys RC Lightning Mcqueen, I just worry that it won't have enough room for the electronics. I already love the car as is, it is great with driving, and its fun, but one; the stock remote is starting to feel more flimsy as I use it, and that proportional throttle would be awesome, because everytime I try to drive him, I spin out on the floor. Would upgrading the Mcqueen mean having to give up the turbo mode though? If that is the case, then I might not do it, but what do you think, is there some way to still keep the turbo mode on the car with the hobby grade remote? Sorry this is so long, but I am fascinated by this upgrade, its so simple, but it makes a world of difference in making a cheap toy car worth the money. (Because they always end up wearing out within a few years lol)
Simple pos n neg - even 6 motors can run on one esc ruclips.net/video/0XOfZU8TpL0/видео.htmlsi=PsIOQk96W8KAYXb8
Thank you for the video, but I watched it and I am failing to see how this answers my question, the motor McQueen has has a little board on it, so I'm thinking that is what makes the turbo mode possible, would I just need to give McQueen another motor, and ditch the turbo mode? Or would upgrading McQueen make his turbo mode speed his new top speed by default?
I wonder if there is no risk of burning out the receiver since both ESCs have power and both are sending power to the receiver. Please help 🙏🏿
Never had an issue
🤷♂️
Why did you use 2 escs , is it because the steering motor is normal one, does a servo motor need esc?
For your steering motor, using an electronic speed, controller allows it to be variable instead of all the way left or all the way, right
@@JayDrone so servo motor too need it hmm
Great job well done thanks for sharing cheers 🍻
Every plastic connector is called jst. Japanese Solderless Terminal. It's like delineating one crop of potatoes from another a mile away
JST back in the day maybe stood for what you are saying. losi, deans, xt30 n xt60 Are also if you Japanese solderless terminals that have their own name
So I know nothing about rc cars but I assume this car has a motor and not a servo for steering?
Originally the car had a motor it’s been along time since I’ve looked at this video at some point I did add a steering servo
@@JayDrone ah ok cool, so then only one speed controller required?
Do you know if this will work for a RC Car that has an electromagnet for steering? I am assuming this car has a servo like more modern RCs but I don't want to bother with replacing the electromagnet with a servo.
If it only has a Plaza Negitive coming off of it then yes it should work but if there’s any type of electronic speed controller in between it and the board and now it will not work
@@JayDrone Just an update that this does work with electromagnet steering. I resurrected a Nikko Lazer RC car from I think the early to mid 90s, that wasn't working (I am guessing because of corrosion on the circuit board). Thanks for the video it helped a lot.
Where should i plug the lights in ? The tail and head lights
I never messed with lights on mind
My kid just got the Spiderman remote control car, with 5-10 minutes of playing with it. it started making a grinding sound and barely accelerates and goes real slow. if i pick it up and press the forward, it starts off grinding for a second and then the wheeels start spinning freely and fast without the grinding noise. But as soon as yoi let go or put it on the ground, it starts the very loud grinding noise
The grinding noise that you’re probably hearing is probably a gear gear feed system that is missing a tooth in the year or the year is not making complete contact that’s what I would assume or the motor itself is burned out or burning out
@@JayDrone u think it's possible for it to be repaired by myself
Thanks!!!! 👍🙏
U bet
I just ordered everything that you show in the video to make my RC faster. I do have a question... If I use two 2s Batteries (one for each ESC, does my rc car will be faster than only using one battery?
thanks for the video!
Trial and error, my friend everything that you have just asked me try every RC car is going to be a little bit different because the guts to them are a bit different
All you need to do is buying a servo for ther steering. It will be more easier
Got the parts in. Hooked it up bind the controller and connected the esc correctly. Is there any setting that the controller need to be set too? I have the exact same controller as yours.
You may need to adjust your channel settings, other than that no
I do not know how to take the canopy off.... I do not have the power of RUclips. Can you show me how?
Lol 😂 small screws no doubt new vid
More coming just did this today ruclips.net/video/RYRTCER-M0M/видео.htmlsi=E__gSnN1d4m201Pi
My apologies but what battery are you using and what benefits does this add?
benefits = speed
What size battery u using
All the video so without watching it I would assume probably 7.4 V 4000 mA an hour
Thanks a lot man. You made it real simple to understand. ✊🏾
Happy to help
I just did another video like this today something I’ve been wanting to do for a while did it on a vehicle that had two motors front and rear same type of set up though
@@JayDrone cool. I’ll take a look.
Can I see image of bind button and how do I bind if I don't have bind button is it important ?
If memory serves me correct you need a bind pin to put the thing in bind mode
Just browsing and researching. What exactly did they upgrades do? Did it do the proportional steering and proportional throttle? Thanks y’all sorry for the dumb question
Ability to use hobby grade controller, adds proportional throttle and overall range control- also upgraded to lipo = more power=faster-much faster
How do I do this if I have two motors and a steering motor
Same way just connect the two driving motors together positive or negative run them to the positive and negative of the ESC and then hook up the steering as shown here
Could you jump the switches into 1?
Could
So I did this exactly but my ch1 is not ding anything. The channel two is working . Weird this is when I disconnect one esc from the battery but leave it connected to the esc the lights stay on on both esc? Could it ve a bad receiver?
Could be a bad ESC or the receiver I would bank ESC as I’ve had bad ones unfortunately
To determine that just switch to ESC And see if the other channel works if it doesn’t you know that’s your problem
@@JayDrone yeah I tried that. I just noticed on the receiver it's austin 4-6v but the ad I bought it from says the receiver voltage is 4-14v. So I would asse this is the problem. I tried with a receiver and transmitter for quadcopter and everything works fine. This receiver is 4-10v .
Is the controller also included in the kit? If not, what is the cost 💲 of both things? Your friend, Jeff.
No kit u have to buy everything ur self
Man awesome video...I need your help.
I have a tyco 9.6v twin turbo lamborghini that doesn't run but it's a sentimental thing for me. I wanna get it running again. I wanna do what u just did in video with the esc and wires. I have a 2.4ghz transmitter. Did u use original servo,? What do I need to buy? Plz help
Great job and thanks for sharing
What are the chances that the receiver might be bad? I got everything to work but it wont bind to the transmitter any advice? Thanks
Why 2 ESCs?? Because they aren’t powerful enough? Or because you didn’t want to put in a servo?
Just like a real plan better to have two than just one
@@JayDrone lol you mean, it’s just for the other motor in the car. The steering motor. Those are tiny little 20a ESCs from a drone. I build those also. But nobody uses those kind of ESCs anymore. Only stacks now. You should upgrade the motor! Doubles the speed. That along with a brushed 60a 3S ESC.... this thing flies like a hobby grade
How much does it cost 💲 for the hop-up kit for these cars 🚗? Are they available at hobby shops 🏬? I just subbed!! Your friend, Jeff!!
Appreciate the sub I shop online
Jd.... What happened to the dc drone..... 🙄. Gr8 vid as always. 👊🏿
dc drone?
What I you have a 4wd car? Do I need an extra esc?
No run both drive motors togeather
Which size battery upgrade do you suggest? Or like max battery for this size RC?
1200 to 1500 mAh 7.4v
Obviously if you play around with different sizes you may find a smaller battery may give you a longer run time versus a bigger battery because sometimes certain RC cars in motors cannot take a heavier load and operate more efficiently with a lighter load
@@JayDrone that’s the kind of info I need. Thank you for your knowledge. I am great full hopefully I can modify these right.
My rc jada hypercharger has a antenna is that a problem for this?
Help I have jada toys big time muscle drift car black edition and Brian’s Supra same car just different door kit I wanna upgrade the batterie it already has a 9.5V I wanna upgrade but I don’t know how HELP
great job sir.. but i think your gonna kill your rx.. 2 esc is powering it up.. i suggest to remove 1 power cable on 1 esc to rx (middle one).. that should do the trick :)
Na it’s fine same amount of power is powering it reguardless ty for concern tho
I thinks that's what happened to mine receiver. The 1st channel not working any more. Worked at first.
Thanks for the video,and i need the same setup you did for a friend of mine, can you list all the parts you used in this video for me? thanks you definitely got a new subscriber.
Check the discription
@@JayDrone Thanks, got it.
Does this give me a controllable throttle? Or will it still be an on off type throttle?
It will give you what you are asking which is called variable throttle
Wait what is this upgrade doing? Is it making the battery last longer or is it making it faster?
This will potentially make it faster just as well as allow you Variable throttle and potentially steering
It will also give you longer control range
Oh cool and thanks for replying even though it’s been a year later
What if I don't have the remote ? Just asking trying to get into the r/c game. Thanks in advance.🤘
How much for whole setup you used for it?
You’re probably looking at $100 but once you have the remote then to do it to any other RC car you’re probably looking at $30 an RC car and give her check
@@JayDrone thanks
Does this make the car faster
More controllable n if volts are increased YES 🙌 faster
very good tutorial. is there a way to do it without the ESC?
Might be but doubt it
Hi Jay, thinking getting a simulator for a heli/ multi rotor drone. Have you any ideas of a good available sim programme?
depends on ur pc
Can the original board take 2s? I'm planning on molding mine but don't want to spend too much money
Because the car only costs $25 waste of money to waste a ton it it I'm just looking to make it faster with what i have
Most will take 2s
Please help. I've done this to the t of how u do it. When I wire everything up both ESC blink like yours but blinks faster. I took one of the ESC from one of my wpl rc and I had another one laying around and the I was using worked fine. So after doing this nothing happened. So I unhooked everything and put it back on my wpl rc and now my wpl doesn't work. The steering does but not motor. Any idea what the fast blinking means or why my ESC did work and now doesn't. Please reply asap
Do I need to bind my remote if it was already binded before doing this
You can try rebooting it and see if that works I never had any issues as a shout exactly how to set it up I’m sorry that you’re having issues hopefully you can get it figured out
I think it was the way I made the jumper wire. I had the 2 ESC jumping from one another vs having them ran in 2 sequences. I fried both ESC this way lol
I need some help I have a little project 20$ jada Hyper charger trying to upgrade it I saved a video of the project but it’s private now I bought everything I need I believe I have an soldering and a 18650 battery and holder for it connected it but it’s not working the car still works but I don’t think that the speed changed much there’s 2 modes regular and boost mode in the video that I saw there was 2 18650s installed just wanna start with one please help if you can thanks
It’s really simple just follow this video you’re not gonna get the boost mode you’ll get optimal power and you can also increase the voltage but don’t do too much because some of these cars cannot handle much more voltage than originally designed for one of the Jada hyper cars I have done this too it’s a police car they came with I think in metallic red Camaro the police car I have done the exact same thing I did in this video
Tried and it didn't work. Steering kept going rapidly back and forth no matter what direction I turned. Forward was a bit jumpy, and reverse kept slightly going back then jumping into a jumpy forward. 🤷♂️
Is this fully proportional?
Throttle yes - steering kinda unless u install a servo motor for steering
@@JayDrone ok thnks
What battery did you use? Do you have a link to a battery?
Will this make it faster rc car?
It might - slightly
@@JayDrone alright thank u
@JayDrone it might? You're being sarcastic, aren't you. Lol?
Can i use my old radio controler?
Yes
Thanks bro.. is there a link you can share where I could buy the stuff I need
Check the description
Can you do that with a atv
Yes
Like it
Does this work on a Nissan skyline from Jada RC?
Yes any car or truck u can do this with
My 10$rcjust went into smoke tried to put 4.8 volt battery and right when I connected it went into smoke
If you over, bolted, typical, or when it really sounds like it might not have had the connection, right
@@JayDrone thanks man 🙏🏻it was prolly to much for the cheap lil mother bored the car came with
Anyone has good advice on how to convert to long range rc?
This setup will give u range
What is the spec of the lipo battery you are running?
4v 600maH @ 7:10
Stock motor?
Yes
Bam !
Bam
Bout to turn the fast and furious supra to hobby grade
Thad b doap
@@JayDrone im working on it now tomorrow ill hit the local hobby store planning on making a vid for RUclips
I put a servo in mine
Nice I did that with another build
All it needs is a different canopy 😂
it is not proportional so why not just put bigger battery in
It very much is proportional throttle. Do you have full range of stick movement versus all go or all no
👍👍👍👍🎮🎮🎮👍👍👍👍🇺🇸🇳🇱
U need to go to Harvard
Ty
i have a hypercharger! its a supra!
Cool
L
M
Drones are even simpler
ruclips.net/video/BEE-T-c87G4/видео.html