Thanks so much for much for this. I just did mine and got it out, installed wireless phone charger in place of stock holder and back together in under 45mins, thanks to you! 🙏
You just saved me AED220! Thanks. My card slipped through the cardholder hole and went behind the Infotainment system. This video helped me open it up and retrieve at 0 cost. Appreciate this video 🙏
Спасибо за видео. Теперь понятно куда деть остальные кнопки , когда займусь переделкой своего Паджеро. А то все думал куда деть кнопки для дополнительного света. А визитницей совсем не пользуюсь.
Thanks for that . Just what I needed to know 😁🤗🤭 . But NOT as quick and easy as I had hoped 😬😵💫 . But I already have most of it OUT so I may as well do it ? .
Hello thank you very much. The traction switch is fully plug & play into the Traction Control ECU and involved no wire cutting. You can find it here on www.cronos4x4.com/products/mitsubishi-pajero-plug-play-traction-on-off-loom-rocker-switch-housing
Dude I see you have two switch for traction control one on your right and another on your left side of the steering wheel? I also see some red colour button which I am not able to understand seems like a nos button to me..haha. how are the paddle shifters working? Please paste a link for the tyre pressure monitoring thing so it can be purchased. BTW you should be calling your pajero 3.9 liter since you upgraded the piston.
Hey wwll spotted 😉 yes I am experimenting with the traction loom buttons thats why. The one in the rocker switch is from www.cronos4x4.com/products/mitsubishi-pajero-plug-play-traction-on-off-loom
Hello with any tuning you are of course pushing the car to its limits and theoretically it should have an impact. Though so far been driving my Pajero quite a bit offroad with all the modifications and no issues thankfully
Hello you are most welcome. I would say start with AEM dry airfilter and unichip. This is a reasonable start on your modification journey. Do follow my channel for updates and check out for some ideas on Pajero mods www.cronos4x4.com
somehow the traction control shows that its off, even though when i press the button to turn it on it doesn't. i had to remove the battery terminal cables to work safe. any clue how to turn it back on?
Thanks so much for much for this. I just did mine and got it out, installed wireless phone charger in place of stock holder and back together in under 45mins, thanks to you! 🙏
You just saved me AED220! Thanks. My card slipped through the cardholder hole and went behind the Infotainment system. This video helped me open it up and retrieve at 0 cost. Appreciate this video 🙏
Thats amazing really glad the video helped you out 😊
fck I lost my card too ffs
@@otoos1284 did you find it?
Thank you so much for instructing how to disassemble and install the internal parts for Pajero, A really useful video, thank you for posting..👍
Your are most welcome! Glad you are finding these useful!
Спасибо за видео.
Теперь понятно куда деть остальные кнопки , когда займусь переделкой своего Паджеро. А то все думал куда деть кнопки для дополнительного света. А визитницей совсем не пользуюсь.
makes sense, this is a good place to add the extra buttons on Pajero
Excellent info and thanks for the video. I changed the card slot over today and the dash removal had me beaten until I watched this, then it was easy.
Amazing really glad the video helped! It took me a while to figure out how to get the dash out 😊
فيديو راااائع ممكن اعرف موديل مقياس ضغط الاطار Tpms وهل احتاج الي housing اكبر
من سبع قطع
Thanks mate, good video really helpful for me installing my new UHF. Legend, cheers 👍
Glad it helped!
Thanks for that . Just what I needed to know 😁🤗🤭 . But NOT as quick and easy as I had hoped 😬😵💫 . But I already have most of it OUT so I may as well do it ? .
You’re welcome 😊 Yes go for it :)
Great job man. You got some awesome equipments there. I noticed puddle shifters how did u install them?
Hello Fahad thank you for the message! These are from www.cronos4x4.com they are custom making paddle shifters for the Pajero 😊
@@SandTrack can’t find it in that site
@@sundeepsunil5686 its not listed yet as its still on custom order only. Message them and they will respond back
Great work!
I'm curious about the traction switch, do you just cut out the traction fuse or how did you do it? please elaborate.
Hello thank you very much. The traction switch is fully plug & play into the Traction Control ECU and involved no wire cutting. You can find it here on www.cronos4x4.com/products/mitsubishi-pajero-plug-play-traction-on-off-loom-rocker-switch-housing
Hi mate
Where did u get extra those switches ?
Thank you so much. Great video 👍🏻 it helped me a lot.
You are most welcome! Glad it helped!
Dude I see you have two switch for traction control one on your right and another on your left side of the steering wheel? I also see some red colour button which I am not able to understand seems like a nos button to me..haha. how are the paddle shifters working? Please paste a link for the tyre pressure monitoring thing so it can be purchased. BTW you should be calling your pajero 3.9 liter since you upgraded the piston.
Hey wwll spotted 😉 yes I am experimenting with the traction loom buttons thats why. The one in the rocker switch is from www.cronos4x4.com/products/mitsubishi-pajero-plug-play-traction-on-off-loom
Hi Great video. Do you believe that the space behind this panel is a standard single DIN size? I would like to mount a single DIN CB in this space?
Hi Rob it's a single Den and I have seen CBs mounted there before
does your tune up of pajero affect its reliability? i have 3.5 and willing to make a safe and slight tune up
Hello with any tuning you are of course pushing the car to its limits and theoretically it should have an impact. Though so far been driving my Pajero quite a bit offroad with all the modifications and no issues thankfully
@@SandTrack thanks for fast response 😊. do you recommend something safe below 40 hp and give reasonable extra power ?
Hello you are most welcome. I would say start with AEM dry airfilter and unichip. This is a reasonable start on your modification journey. Do follow my channel for updates and check out for some ideas on Pajero mods www.cronos4x4.com
somehow the traction control shows that its off, even though when i press the button to turn it on it doesn't.
i had to remove the battery terminal cables to work safe. any clue how to turn it back on?
Drive for a few KM and the light will go away
Is your heated seats stock ? First time I see that on a UAE Pajero.
Hello yes the early 2008 models came with seat heaters. Thats stock 😊
@@SandTrack I soo much need this in my 3.8l, I had to buy a hot water bottle for the winter since the engine take sooooo much time to heat up.
How do I disassemble the dashboard to change the lights?
That requires an electrical expert
Not clear on how the glove box comes out. Mentioned a broken tab?
I lost an access card behid this card holders
ffs why is it so hard to open
It's tricky indeed!
How can I install heated seat on my pajero
These came directly with the car from the factory. Check with your dealership
كيف اغير انوار عدادة السياره
That requires an electrical expert
Dude is your Pajero top of the line right?
Hello yes its the top of the range 3.8. Though I added the pajero paddle shifters and buttons 😊
@@SandTrack Woowwww, how much for the Pajero paddle shifters ?
@@yutuniopati these are still in testing. Contact www.cronos4x4.com to get details on prices
@@SandTrack damn nice