Thanks. I cleaned all of the tubes and hoses but to no avail. I looked at my inlet but it was clean except for the side where that float is and it was completely filled and black. Because no where else was dirty i thought it was normal. After cleaning the black gunk out , machine is back to working.
We have the same model of kitchenaid dishwasher and the problem with mine is no water going to the arm and it is not washing the top racks. I did diagnostic and it gave me 9 pause 1 pause repeat which means there’s an electric issue on the diverter but I checked the wires and I don’t see anything.
Mine had many issues and this is just one of them. Ultimately it was the water pump that seized up. Its pretty easy to get to the diverter though. If you haven't taken the pieces off to check it out I would do that. There could be an obstruction in the diverter preventing it from moving. You might need to check the resistance / continuity of the diverter to see if there is a problem with the diverter motor that you can't really see.
I know he gave two terms for that white plastic piece on the back but I can't locate this info online. I have a whirlpool can someone please assist?! I need to figure it out so I can replace it 😅
Wow, my Maytag dishwasher is identical to kitchen aid. Glad I didn’t pay the extra for the hood ornament. Just pointing it out. No disrespect intended.
I'm not really sure what the difference between the brands within the same overarching brand really are when it comes to appliances. Its not like a Ford and a Lincoln where the differences should be pretty visible. Generally I think that Whirlpool is the cheapest of the bunch, but that might not even be correct in all situations.
@@DIYNorth I’ve not been happy with my Maytag. Wish they didn’t send the company to Mexico. My dad used to work at their plant in Newton, Iowa when they were still made in America. Their washer and dryer etc would last 10-15 years back then, now we’re lucky to get 5. It’s almost pointless to even buy one anymore. Hope our businesses come home and we can get those jobs back. A lot of problems would be fixed and the communication/problem solving equations would resolve a lot more quickly. Now we have to interpret our problems several different ways just to figure out anything.
it was a flashing clean error initially which is the clean light flashing 8 times then a break then 4 times. the real major problem was the filter exploded. this is just one of many problems that also happened at the same time.
nicely explained
Thanks for watching
This saved me so much! Thank you!!!
Thanks for watching
Thanks. I cleaned all of the tubes and hoses but to no avail. I looked at my inlet but it was clean except for the side where that float is and it was completely filled and black. Because no where else was dirty i thought it was normal. After cleaning the black gunk out , machine is back to working.
Thanks for watching.
The black junk will get you
We have the same model of kitchenaid dishwasher and the problem with mine is no water going to the arm and it is not washing the top racks. I did diagnostic and it gave me 9 pause 1 pause repeat which means there’s an electric issue on the diverter but I checked the wires and I don’t see anything.
Mine had many issues and this is just one of them. Ultimately it was the water pump that seized up. Its pretty easy to get to the diverter though. If you haven't taken the pieces off to check it out I would do that. There could be an obstruction in the diverter preventing it from moving. You might need to check the resistance / continuity of the diverter to see if there is a problem with the diverter motor that you can't really see.
I know he gave two terms for that white plastic piece on the back but I can't locate this info online. I have a whirlpool can someone please assist?! I need to figure it out so I can replace it 😅
Recommend searching parts dr or similar sight with your model number.
partsdr.com/?srsltid=AfmBOop9GCHIXKXNFqCvLwVHK4EPrXSmU0HJUcZ9sXxLo_zWOyrqJzuQ
i did all this. still not draining. we even remove the pump and clean the filter there. still not working.
Is the drain pump turning on
It doesn't seem like to work at all. i tried everything for 3 days now. thanks
@@aelmaecruz3179 what error codes are you getting
Wow, my Maytag dishwasher is identical to kitchen aid. Glad I didn’t pay the extra for the hood ornament. Just pointing it out. No disrespect intended.
I'm not really sure what the difference between the brands within the same overarching brand really are when it comes to appliances. Its not like a Ford and a Lincoln where the differences should be pretty visible. Generally I think that Whirlpool is the cheapest of the bunch, but that might not even be correct in all situations.
@@DIYNorth I’ve not been happy with my Maytag. Wish they didn’t send the company to Mexico. My dad used to work at their plant in Newton, Iowa when they were still made in America. Their washer and dryer etc would last 10-15 years back then, now we’re lucky to get 5. It’s almost pointless to even buy one anymore.
Hope our businesses come home and we can get those jobs back. A lot of problems would be fixed and the communication/problem solving equations would resolve a lot more quickly. Now we have to interpret our problems several different ways just to figure out anything.
Was the error the 3 beeps?
it was a flashing clean error initially which is the clean light flashing 8 times then a break then 4 times.
the real major problem was the filter exploded. this is just one of many problems that also happened at the same time.