thanks for the video, I'm installing Led's on a 2013 honda civic EX, but make sure to clean the glass with alcohol when replace halogen bulbs(next time)
All I did was fold down the corner, I didn’t pop out any of those clips. Because when I do, I can NEVER reinstall them without breaking them. Anyway fold down twist out, swap bulbs and reinstall. Left side is trickier as there’s not enough wire to twist out. I simply unplugged it, twisted out swapped bulbs and reversed the process.
Yes. The clips are a pain! Two parts. you must thoroughly remove the inner part of the clip from the outer part. This means getting the screwdriver between the two parts when removing. Not very clear in the video. Also, when re-installing, set the outer (retainer part) in place, and THEN insert the piece with the shaft to spread the wings that retain the clip in place, otherwise you will not be able to engage the clip assembly.
Excellent video. No talking, straight to the point. Thank you.
Straight to the point thank you!
Excellent video. No BS. Exactly what I needed. Thx very much!
Awesome video, without any word 👌🏻
Thanks for watching
Great shirt! And this was very helpful for my 2013 EXL. First bulb to go out in the car's history at 73K miles which is great.
Very Helpful, well done instructions. Thank you!
thanks for the video, I'm installing Led's on a 2013 honda civic EX, but make sure to clean the glass with alcohol when replace halogen bulbs(next time)
All I did was fold down the corner, I didn’t pop out any of those clips. Because when I do, I can NEVER reinstall them without breaking them. Anyway fold down twist out, swap bulbs and reinstall. Left side is trickier as there’s not enough wire to twist out. I simply unplugged it, twisted out swapped bulbs and reversed the process.
Great video thank you
Thanks a lot I did it quick! 😊👍
Use the Sylvania Vevo bulbs and also no need to pull out all the plastic pins on the rug cover only 2 on each side closest to the light.
Yes. The clips are a pain! Two parts. you must thoroughly remove the inner part of the clip from the outer part. This means getting the screwdriver between the two parts when removing. Not very clear in the video. Also, when re-installing, set the outer (retainer part) in place, and THEN insert the piece with the shaft to spread the wings that retain the clip in place, otherwise you will not be able to engage the clip assembly.
Anyone know if this is the same procedure for the 2015 Honda Civic? I can’t seem to find a video for the 2015 model.
This would be perfect but my light bulb is stuck in the socket. Won't even come out!!!
Do the left side!
That how I used to be....till I bought the tool and all the clips fly off the cars.... sometimes they vanish
im showing 7443 light bulb not 921 for brake light
This video is for the back up light, NOT the brake light.