This is actually helpful to me. Have a nice 1/2 gall US Stanley that gets hot on the outside when you put coffee in it. Stanley told me it was too old to warranty, pre 2000.Im gonna try and make it at least a little usable. I see how much room I have at the bottom now to work.Thanks
They must have got the English directions instead of Russian and misread a step. "Preheat bottle with hot liquid before filling." "With cut off wheel, cut bottle in half in manor that is threatening to wife's fingers"
Очень грамотно сделано, уголь это демпфер, изоляция вакуум. Конструкция изменена в 2019 , Стенли хочет больше денег, живучесть термоса скатилась до простого китайского говна, то есть до первой деформации оболочки.
Especially they don’t make the ones with that black powder anymore. Coal? Idk what but yeah they don’t make it and they destroyed a nice product for nothing
por lo que veo en el video, es un termo de los chinos xq en la parte de abajo se ve la etiqueta blanca. luego el tapon sebador es de los nuevos y la etiqueta de stanley es la nueva tambien xq no dice Stanley Aladdin como los viejos de eeuu.. otra cosa que lo raro del polvo negro en un termo chino, no lo sabia.. xq si llega a desarmar un termo original aladdin eeuu y si traia ese polvo negro.. lo desarme xq ya calentaba por fuera y le perfore 2 agujero abajo para meterle poliuretano, y ahi salio el polvo nego ..pero igual no funciono jajaj
@miSión La PLata La tecnología de antaño en Stanley se llamaba CharcVac (Charcoal Vaccumatic) qué es carbón entre las paredes al vacío) eso ayudaba a darle mayor resistencia al termo y una mayor solidez, un termo de 1.1 qt Stanley manufacturado en China actual pesa aproximadamente 830 gramos, y un termo de 1.1 qt de antaño con carbón dentro pesaba aproximadamente 1250 gramos, lo sé porque yo tengo ambos termos.
disculpen tal vez mi pregunta .. tengo mi stanley de 1lts original traído de usa un familiar así que no es el clásico comprado x ahí que te dicen original.. y tal vez no lo sea.. pero siento que en el mío al inclinarlo hacia adelante y atrás siento como arena o algo que va y viene dentro del mismo .. ahora que leo esto del carbón ni lo sabía .. estaría dentro de lo normal o no tendría que suceder? Me intriga tanto que no lo abro para no arruinarlo pero me gustaría tal vez si alguien me responde a esto .. sería muy agradecido!!!
hola amigo.. tu termo calienta por fuera xuando le pones agya caliente ? no es tan comun que suceda eso pero si pasa.. eso paso xq pudo haber recibido algun golpe o puede que el terma haya perdido su vacío y puso entrar algo de humedad dentro de las 2 paredes y generar algun grumo o simplemente el carbon en polvo que lleva adentro , perdió su compresion y se ha soltado ..pero no es nada preocupante xq es en el interior de las 2 paredes del termo .. actualmente ya no le ponen carbon en polvo a los stanley por eso son mas livianos .. ya usan otra técnica o tecnología de vacío..
@@mautacua1 muy amable y agradecido x haber recibido tal respuesta siendo Tan claro . El termo no calienta para nada x fuera .. pero ese carbón como bien decís que lleva adentro me genera un stress terrible que no sabía si estaba bien o mal .. pero bueno .. cumple la función principal que es la que aposté desde que lo encargué.. muchas gracias x la info
@@pablosalvo5991 mientras no caliente por fuera, seguirá cumpliendo la función.. la única parte que es haceptada que caliente un poco.., es en la parte de arriba por donde enrosca la tapa/ vaso del termo xq esa parte esta en contacto con la botella interna y externa y ahi no hay como tal recubrimiento de carbono. esa parte creo va enroscando las 2 botellas del termo.. algunos que pierden el vacío, solo se calienta un poco en alguna parte del termo y otros calienta todo el termo..puedes probarlo calentando agua, ponérsela al termo, cerrarlo y a la media hora pones el antebrazo por todo el termo , lo vas probando si hay partes tibias fuera( esperemos que no ). el carbono alomejor perdio su compresión dentro de la botella y por eso se soltó.. anteriormente en la parte de abajo del termo , tenia una especie de perno con rosca y una tuerca.. por ahi se sacaba el aire interno y se sellaba para mantener el vacío del termo..seguro si tu termo es Aladdin o anterior, posiblemente lo tenga, pero seria cosa de sacar la base cromada del termo.. no lo recomiendo xq un golpe y puede perder el vacio.. los termos actuales, el sistema de fabricación es diferente y la forma de quitar el aire tambien.. ya hay nuevos materiales y nueva tecnología . asi dejalo y sigue disfrutando del termo,, solo es un pequeño ruido y es un gran termo.. disfrútalo…
Hello dear.... what would you like to do to day love..... well it's a nice day today let's......... have some fun (WINK WINK) and cut our flask in half to make sure its....... empty......... like my head......
Pero el video a lo último no lo tiene que cortar tenía que haber mostrado de cerca qué es lo que tenía adentro De qué está compuesto apenas lo abrieron cuando me quise acordar terminó el video no mostraron nada
Hello.....is this stanley...... well you know you say its built for life and it's got a lifetime guarantee.... well you won't believe this but I was sawing some wood....like and my flask fell over and was sliced in half..... could you send a replacement please...... you know free of charge..... like.
+dbez What you saw coming out of there was charcoal, which is a good insulator. The real virtue of the insulation comes from the fact that it had the air vacuumed out from the cavity. No air = no convection. Charcoal conducts EXTREMELY slowly and blocks radiant heat transfer.
Qué ganas de hinchar las pelotas de cortar un termo así porque sí. Con la falta que me haría. Me lo hubieras regalado, salame. Como se ve que no tomás mate vos, eh.
The one they opened in this video is a pre 2000 piece when they used coal powder as insulation. Now they use the vacuum chamber and thicker metal walls
Идеальный изолятор, это вакуум. И чем сильнее вакуум, тем лучше держит тепло. Остальное всё детский сад... На видео какой-то порошок насыпали, это не термос, можно смело называть - емкость для жидкости )))
Would have been nice to get 10 seconds to examine end results.
Nana.. That wouldn’t have been a Rusky-like enough, edit. 😆
I always wanted to see the inside of one of those but for a moment I was afraid I might end up seeing the inside of that helpers hand!
now that i have one of these and love it, it is horror movie to watch this /.\
This is actually helpful to me. Have a nice 1/2 gall US Stanley that gets hot on the outside when you put coffee in it. Stanley told me it was too old to warranty, pre 2000.Im gonna try and make it at least a little usable. I see how much room I have at the bottom now to work.Thanks
They provide a lifetime warranty, it's can't be too old for a claim.
i always wondered what the inside of a stanley looked like
what does it look like?
What is the name of matter that is droopped?
They must have got the English directions instead of Russian and misread a step.
"Preheat bottle with hot liquid before filling." "With cut off wheel, cut bottle in half in manor that is threatening to wife's fingers"
Nadie aprecia la belleza de destruir con la amoladora.
Algunos si lo hacemos! 😜
Очень грамотно сделано, уголь это демпфер, изоляция вакуум. Конструкция изменена в 2019 , Стенли хочет больше денег, живучесть термоса скатилась до простого китайского говна, то есть до первой деформации оболочки.
я тоже так думаю, нет опоры внутри, любое падение и колба может сместиться, тем более если там есть вода. сделали бы дорогую серию не убирая уголь....
La seguridad ante todo!
Der Arbeitsschutz wird hier grob misachtet!
You just destroyed a perfectly good Thermos Bottle for no reason. They WORK !
Especially they don’t make the ones with that black powder anymore. Coal? Idk what but yeah they don’t make it and they destroyed a nice product for nothing
I buy one for my husband for Christmas 🎄
What´s the point?
El dueño de termos waterdog mostrando toda su ira!!!
И в чем смысл? Что Вы хотели показать?
Пародия на How its made?)))
Surely the whole point of this was to the internal structure. Why end the video before showing it?
богато живете. Этот термос № 1 в США.
хотяб показали в разрезе, подробно
You're not even letting us see/examine the inner layers of the thermal bottle. This video is 100% pointless.
Al sr no le cortaron la mano de pura suerte, terrible boludo 🤦♂️, enseñaron lo que no hay q hacer jaja
İçinden dökülen yalıtım malzemesi nedir.
Идиоты, этот термос могли бы еще и правнуки на пикник тягать.
okay, now I suspect it was scrap thieves who stole my thermos
Mark Allen Channel nooo dude it is not your thermos.
Dañaron un termo y no emseñaron nada.
Que sentido tuvo este video?
no vi el mensaje ni el aprendisaje. no lo entendi.
Mejor ver un video de ortografía, no?
Lo que yo pude ver, es ese polvo negro entre las dos botellas. Yo pensé que había vacío
@@LaMiSion70 Si no me equivoco, los primeros termos tenia carbón y conservaba por mayor tiempo la temperatura. Los fabricados en china no tienen.
por lo que veo en el video, es un termo de los chinos xq en la parte de abajo se ve la etiqueta blanca. luego el tapon sebador es de los nuevos y la etiqueta de stanley es la nueva tambien xq no dice Stanley Aladdin como los viejos de eeuu..
otra cosa que lo raro del polvo negro en un termo chino, no lo sabia.. xq si llega a desarmar un termo original aladdin eeuu y si traia ese polvo negro.. lo desarme xq ya calentaba por fuera y le perfore 2 agujero abajo para meterle poliuretano, y ahi salio el polvo nego ..pero igual no funciono jajaj
@miSión La PLata La tecnología de antaño en Stanley se llamaba CharcVac (Charcoal Vaccumatic) qué es carbón entre las paredes al vacío) eso ayudaba a darle mayor resistencia al termo y una mayor solidez, un termo de 1.1 qt Stanley manufacturado en China actual pesa aproximadamente 830 gramos, y un termo de 1.1 qt de antaño con carbón dentro pesaba aproximadamente 1250 gramos, lo sé porque yo tengo ambos termos.
disculpen tal vez mi pregunta .. tengo mi stanley de 1lts original traído de usa un familiar así que no es el clásico comprado x ahí que te dicen original.. y tal vez no lo sea.. pero siento que en el mío al inclinarlo hacia adelante y atrás siento como arena o algo que va y viene dentro del mismo .. ahora que leo esto del carbón ni lo sabía .. estaría dentro de lo normal o no tendría que suceder? Me intriga tanto que no lo abro para no arruinarlo pero me gustaría tal vez si alguien me responde a esto .. sería muy agradecido!!!
hola amigo.. tu termo calienta por fuera xuando le pones agya caliente ? no es tan comun que suceda eso pero si pasa.. eso paso xq pudo haber recibido algun golpe o puede que el terma haya perdido su vacío y puso entrar algo de humedad dentro de las 2 paredes y generar algun grumo o simplemente el carbon en polvo que lleva adentro , perdió su compresion y se ha soltado ..pero no es nada preocupante xq es en el interior de las 2 paredes del termo .. actualmente ya no le ponen carbon en polvo a los stanley por eso son mas livianos .. ya usan otra técnica o tecnología de vacío..
@@mautacua1 muy amable y agradecido x haber recibido tal respuesta siendo Tan claro .
El termo no calienta para nada x fuera .. pero ese carbón como bien decís que lleva adentro me genera un stress terrible que no sabía si estaba bien o mal .. pero bueno .. cumple la función principal que es la que aposté desde que lo encargué.. muchas gracias x la info
@@pablosalvo5991 mientras no caliente por fuera, seguirá cumpliendo la función.. la única parte que es haceptada que caliente un poco.., es en la parte de arriba por donde enrosca la tapa/ vaso del termo xq esa parte esta en contacto con la botella interna y externa y ahi no hay como tal recubrimiento de carbono. esa parte creo va enroscando las 2 botellas del termo.. algunos que pierden el vacío, solo se calienta un poco en alguna parte del termo y otros calienta todo el termo..puedes probarlo calentando agua, ponérsela al termo, cerrarlo y a la media hora pones el antebrazo por todo el termo , lo vas probando si hay partes tibias fuera( esperemos que no ).
el carbono alomejor perdio su compresión dentro de la botella y por eso se soltó.. anteriormente en la parte de abajo del termo , tenia una especie de perno con rosca y una tuerca.. por ahi se sacaba el aire interno y se sellaba para mantener el vacío del termo..seguro si tu termo es Aladdin o anterior, posiblemente lo tenga, pero seria cosa de sacar la base cromada del termo.. no lo recomiendo xq un golpe y puede perder el vacio.. los termos actuales, el sistema de fabricación es diferente y la forma de quitar el aire tambien.. ya hay nuevos materiales y nueva tecnología .
asi dejalo y sigue disfrutando del termo,, solo es un pequeño ruido y es un gran termo.. disfrútalo…
Hello dear.... what would you like to do to day love..... well it's a nice day today let's......... have some fun (WINK WINK) and cut our flask in half to make sure its....... empty......... like my head......
Pero el video a lo último no lo tiene que cortar tenía que haber mostrado de cerca qué es lo que tenía adentro De qué está compuesto apenas lo abrieron cuando me quise acordar terminó el video no mostraron nada
Tiene plomo. Es tóxico, ahora se sabe
Он режет,а я плачу🥺
Правильно говорил классик - умом Россию не понять! Нахера портить хорошую и весьма недешевую вещь?!?
А голову включить не пытался? Если там нарушился вакуум, то этот термос на выброс. Вот и распилякали...
I want a bottle like this, and the guy cutting it
10 años de prisión!
Hello.....is this stanley...... well you know you say its built for life and it's got a lifetime guarantee.... well you won't believe this but I was sawing some wood....like and my flask fell over and was sliced in half..... could you send a replacement please...... you know free of charge..... like.
What exactly was that insulating material? Or were they smuggling heroin? Mr brownstone.
+dbez vacuum bottle. "nothing" was the insulation.
+dbez What you saw coming out of there was charcoal, which is a good insulator. The real virtue of the insulation comes from the fact that it had the air vacuumed out from the cavity. No air = no convection. Charcoal conducts EXTREMELY slowly and blocks radiant heat transfer.
warum ihmmer alles kaput mache ich wünsche mir seid 3 jahre schon so eine kanne aber geld na ja
Nothing better to do I guess
Qué ganas de destrozar y destruir un termo porque sí! Se ve que te sobra el dinero! Aca en Argentina cuestan más de 100 dólares.
El que tiene plata hace lo que quiere deja de romper las bolas
axel Carrozio ajajjaajajajaja palabras más sabias jamás fueron pronunciadas
Hola, de que material es el aislante?
No creo que te contesten, son rusos jajaja
Aparentemente, por los comentarios, es carbón
No compres piratería
Х1у да г1ерт теш хьо?
Im guessing they didn't figured out how to open it... Oh well they did.
Jaja
Charcoal ones held heat in better. New ones dont have charcoal. "Environmental reasons"
Q peligro.... porque no usaste una Morza .
Can anyone tell the name of this music?
lupul cel rau italian relax music
3 años tarde, espero te sirva.
Saludos desde Córdoba, Argentina!
music name ?
Screwed up the flask
Top
And the point of this was....?
(Sorry I do not read Russian)
Allow us to see whats inside, of course!
Qué ganas de hinchar las pelotas de cortar un termo así porque sí. Con la falta que me haría. Me lo hubieras regalado, salame. Como se ve que no tomás mate vos, eh.
el disco ese negro que saca debe ser lo que actualmente confirmaron que es plomo
жаль. Похоже вещь была хорошая. По ловчее вакуумных...
This has to be serbians doing the video
La Mamushka ahora tiene muñonsitos ....jajajajjajaa
que es todo ese polvo negro que sale de adentro????
carchoal
@@christophewagner4028 y que es carchoal?
у нас снаряды болгаркой режут,и никто не ругает, а вы о какой то безопасности труда!
👊
Зачем там порох ?
Hola! Qué era ese polvo negro?
carbon
Ese no era el original
А потом скажут термос мол сломался, замените по гарантии!
Why???
Do you have any idea of how do they add the charcoal in the manufacture process?? As they are supposed to be "vacuum thermos".
Regards.
The one they opened in this video is a pre 2000 piece when they used coal powder as insulation. Now they use the vacuum chamber and thicker metal walls
Shit still works!
Argentinean mate
Una milipili va a ver esto y se le va a zafar un tornillo
Что это такое?
whyy
me dolió
Ee ne oldu simdi??
Tanto trabajo para cortar el final y mostrar cada detalle que inutilidad para hacer un video...
Opa
От досады бабуля приказала деду распилить термос из - за того , что дед теперь не могёт ходить на рыбалку ...
Stanley funciona
wtf
sobakos linksminasi
Worst video ever
Kidding
😱😱😱
That's unamerican
Que video mas al pedo...
Идеальный изолятор, это вакуум. И чем сильнее вакуум, тем лучше держит тепло. Остальное всё детский сад... На видео какой-то порошок насыпали, это не термос, можно смело называть - емкость для жидкости )))
Учи матчасть темень!!!🤣🤣🤣
eu acho que pode ser carvão , deve ser o segredo da Stanley !!
Problem is vacuum thermoses have a shelf life. It will eventually leak and the whole thing is useless.
Çekim çok kötü.
Эт конечно интересно все...Но на хера его распиливать то было.
Теперь у каждого по пол термаса
Бабка с дедом разводятся, видать, делят имущество...))
@@user-yx1ig2pr8s ахахах. лайк
Pointless people doing pointless things.
I quite enjoyed it as I just bought one. Be nice...
🤕😀
😳😥
Mano, como eu vim parar aqui kkkkkkk
Че за говно я посмотрел? Как работать болгаркой? Самое главное в конце не показали. Дизлайк не думая.
Que idiotice...