The hyanka is a decent starter subwoofer and amps for people who are on a budget. The amps performance is awsome just like the subwoofers. The subs from what ive seen need to break in burn extra glue off and they sound great. Spl im not sure but for sq its good. I run the vxf 12s myself. Great video guys
I have the 10, 12, and 15. They're all really impressive sub's for the price. I have an X-10 or I run a couple ZVX12, or a couple Rockford I Fosgate T2-12's. Caleb just went all SQ and went with some JL Audio W3 sub's. I switch up all the time. Just like the music bass change's also. I did notice the glue smell, I ran the 12 for a couple weeks but she just beats harder. Thanks for your comment 😊
At first powering yes. I'm not sure you watched the whole video but I got the RMS and the Max on the first time giving it power which is very good. I did a few short's on this also and it was more consistent after breaking it in a little bit in my van. I'm sure if I played it for a month I could bring it and test it again and it would do a little better again. Thanks for your comment 😊
Thanks. I appreciate that. I buy everything I have on my channel myself with all my extra money. It's great when I get comments like these because I work hard for everything I have including making these videos. Thanks for your support and thank you for your comment 😊
So it looks like you will get the 2 ohm load around 700 watts, give or take each way. It should make some noise on that. Thanks for sharing and thank you for your comment 😊
@@SubzPawz it hits pretty good. Big d wiz did a dyno test on a jp95t amp @1 ohm it does 1.100 rms so its and the hyanka i bought its a dual 2 ohm so the sub is at 1ohm. I did had a american bass elite 1200 rms but the sub was a dual 4 ohm so final ohm load was a 2 ohm and was getting around 800 rms from the jp95 amp underpowering the american bass by 400 rms.
@@rhurtadorh32 this is the reason I started making my videos. My HYanka 15 is wired to 1 ohm also. It doesn't run at 1 ohm though. So the power you're actually getting is closer to the 2 ohm load and up. He runs a static load, no subwoofer runs on a static load. Watch the video again and see where you're sub is actually running.
John, you guys should really spend the $120 or whatever it is now, on a Dats v3 as I've used the program for many years, and Woofer Tester 3 as well...same thing. It will really help you with seeing the real ts parameters and more. 👍
@@SubzPawz no problem. With as many sub reviews as you do, it would be beneficial to you guys. Can check ts parameters to know what they really are, help in enclosure design and so much more.
Here is an interesting thing I experienced. I'm setting gains with a multimeter as well as crossovers. With my amp set to 1500 watts at 1 ohm, I noticed the voltage dropped when setting the crossover. It did OK but seemed to lack out put and the amp showed clipping at my max set volume with the crossover set a little high around 110 hertz. I decided to close the crossover to around 70 hertz which seemed to drop output but also stopped the clipping. I was setting gains at -3 db with sonic 50 hertz tone on yt. So I tried setting the gain at 1800 watts , with the same tone, and closed the crossover to 70. Now it gets way louder and keeps better voltage without clipping. I fine tune with my bass know which also has the clip light. I am running a nvx loc with a signal clip light and have my rca volts set to 2v. I have been messing with it for months and assumed I was clipping due to power restrictions and never expected that lowering the crossover would allow me to boost my overall output
I'm thinking this may have something to do with the LOC. I just sold a sub to someone that had one installed in his BMW. He has all sorts of issues and my guess with his was the line out converter. I've never used one myself, always done a full deck install. That's odd though, maybe something common. I wish you were local, I'd Meetup and do a video on all my socials and see what everyone says.
Another theory I have is that lowering the cross over may help me keep impedance rise down and not overdrive the amp as easy? I really don't know why I can get louder. A sweep from 25 to 150 shows 35 to 40 is the loudest, I'm tuned at 39 or close to it and a decent roll off starting around 65 hertz. My subsonic is set to 33 but I'm running a loc from the factory amp subwoofer output. I tried to tap before the amp but it didn't sound right and voltage was low input but was like .5 volts. That's why I was setting the crossover around 110 to start with. Integrating a system into a factory setup is a nightmare. My radio runs my oil level reading, central locking, daytime running lights and windshield wiper installation mode. AUDI lol
@@SubzPawz that would be cool, im in eastern ky. I doubt we are close. Its always nice to meet people in the community. Anyway it's something to keep in mind if you ever run into it
@@TOLDyouSOagain oh. I will. Yeah. We're in Massachusetts. My little brother moved to Kentucky so me going there might be in my future, who knows. I love meeting people.
Got one of these dual 2 and am going to try a trunk baffle. What do u think? Went from dual 12 alpine type s in a port to one 12 for space and needed more bass. Ended up with this but unsure of the baffle choice. Know a ported box would hit but I need trunk space. Hope all goes well
I'm not completely sure what you mean. I don't think it would work for an infinite baffle. You need some kind of enclosure. Let me in on more information. Thanks for your question and comment 😊
In those 2 subs really no comparison. You have a budget 12 and then a competition grade 12. I'll do a video of them head to head. Thanks for your question and comment 😊
Hey, I got a good question for you since I know you messed around with the seismic audio subs before. I currently have 3 GFC-122 subs on a smart3B amp. (after reinforcing the spiders to the coil with some E 6000 they pound!)and sounds good from 26hz to 46hz although I prefer the lows. I just ordered 4 Hyanka 15/4 how do you think they will measure up compared to the seismic audio?
Just tune them and ease up on your gains and bass. My only gripe about the HYanka is the 2.5 inch coil. As long as you're gains are set correctly you'll be fine and I think you're going to be pleasantly happy. Enjoy. Thanks for sharing and thank you for your comment 😊
Have you ever modified a small12-inch ported prefab (say 1.5cf) into a large 10 inch box by adding a speaker ring to fit the smaller woofer cut out? Been wondering how this would sound
I actually have the 10's 12's & 15's. I love each one of them. You will love them too. So yes, I would definitely recommend them. Thank you for your question and comment 😊
@SubzPawz hate to bug you. I just want to get it right and be happy, what 2-10s d4 would you recommend for deep hard hitting bass since you've tested alot. $200ish $250 per sub?? Tia
@@ricefamily1381 I'd say one of my favorites were the Lord of Bass LB10. I think you're on the right track with the CT sound's subs. If I were you I would get D2 sub's. I know you'll be wiring to half ohm. With your impedance rise you're probably going to be running from 1.5-3 ohm's. If you get the D4 sub's you're going to be running from 2-4 ohm's, maybe even higher at times.
Yes like the exl-x12.4d The gen-x12.4d And gen-xx12.4dhe maybe the zx112.4d high excursion I'm looking at these to put in my kids s10 extended cab but do know anyone that has some
@@terryheck9507 the GenXX I've tested on the channel. I still have it. I can test it again. The SLC I think that's what it is I tested. They all did their job. I'm sure the big boy's are just as reliable.
its same motor ,coil and spider for the 10,12,15 just bigger basket and cone . wich is fine because just about all the companies use the same build house Jiaxing Jinlida Electron Co., Ltd.
I think looking at them in front of you your eyes want to see something different because one is bigger than the other. I looked them up after the video and yes all the same bottom features. Not sure about build house. That got me stumped. I looked up multiple different times and could find nothing supporting it is right or wrong. Jiaxing Jinlida makes subs and is their own Ltd Co. Ninbo HiYanka Acoustic is another Ltd Co. Both have different addresses and different Warehouses. Both make subwoofers of their own kind and look nothing alike. Other than that I couldn't find anything else. Thank you for your comment 😊
@@SubzPawzJLD makes subwoofers for MANY brands, and one of the most popular brands. JLD(Jiaxing Jinlida) doesn't manufacture Hyanka subwoofers though. JLD supplies a wide array of subwoofers to brands world wide. They're the leading vendor.
I don't ever like to knock down a subwoofer or a company that made the subwoofer. I bought the evl a few year's back thinking it was the answer I was looking for. For me it was more hype than what I expected to hear. For everything it has and the look it has I expected much more and was left wanting more for my money. Now the HYanka on the other hand is half the price and IMO a better sound and a better subwoofer in general. I now own all 3 of the subs they make and each one impressed me. A smaller voice coil than the EVL and a better sound. I might have to get another one probably a 15 and get it in the new comparison video I'm going to be doing. Thank you for your comment 😊
I've been watching reviews on all the hyanka and they don't hold up for an extended period of time the evl has not failed me in the last year of daily abuse and still holding strong hyanka can yank me
@@shawnst.martin7526they do hold up just fine I have 4 12 D2 hyanka D2 subs on a Wolfram aw 9000.1 d and clamp 12k watts they held up just fine. I even have 2 12 and 2 10 hyanka in my man cave in the basement on 3k watts and they dam near shake my houses foundation apart.
@@shawnst.martin7526it is nothing like the evl. They both have a 12 spoke basket and that's the only similarity. The EVL line is a parts bin subwoofer that is highly inefficient. China Future Sound, (the build house( will sell them(15") for $40 with an moq of 100 with a plain dust cap.
The hyanka is a decent starter subwoofer and amps for people who are on a budget. The amps performance is awsome just like the subwoofers. The subs from what ive seen need to break in burn extra glue off and they sound great. Spl im not sure but for sq its good. I run the vxf 12s myself. Great video guys
I have the 10, 12, and 15. They're all really impressive sub's for the price. I have an X-10 or I run a couple ZVX12, or a couple Rockford I Fosgate T2-12's. Caleb just went all SQ and went with some JL Audio W3 sub's. I switch up all the time. Just like the music bass change's also. I did notice the glue smell, I ran the 12 for a couple weeks but she just beats harder. Thanks for your comment 😊
man you took it easy on that sub. full tilt!
At first powering yes. I'm not sure you watched the whole video but I got the RMS and the Max on the first time giving it power which is very good. I did a few short's on this also and it was more consistent after breaking it in a little bit in my van. I'm sure if I played it for a month I could bring it and test it again and it would do a little better again. Thanks for your comment 😊
Man I just bought a hcy 15 because of you guys. Loving these videos on the cheap subs
Thanks. I appreciate that. I buy everything I have on my channel myself with all my extra money. It's great when I get comments like these because I work hard for everything I have including making these videos. Thanks for your support and thank you for your comment 😊
I just purchased that 15 hyanka sub the 2ohm version and it will be going on a small sealed enclosure being powered by a D4sound jp95t amp.
So it looks like you will get the 2 ohm load around 700 watts, give or take each way. It should make some noise on that. Thanks for sharing and thank you for your comment 😊
@@SubzPawz it hits pretty good. Big d wiz did a dyno test on a jp95t amp @1 ohm it does 1.100 rms so its and the hyanka i bought its a dual 2 ohm so the sub is at 1ohm. I did had a american bass elite 1200 rms but the sub was a dual 4 ohm so final ohm load was a 2 ohm and was getting around 800 rms from the jp95 amp underpowering the american bass by 400 rms.
@@rhurtadorh32 this is the reason I started making my videos. My HYanka 15 is wired to 1 ohm also. It doesn't run at 1 ohm though. So the power you're actually getting is closer to the 2 ohm load and up. He runs a static load, no subwoofer runs on a static load. Watch the video again and see where you're sub is actually running.
Hell yeah keep it up!!!
Thanks. I sure will. Thanks for your comment 😊
I'm cracking up at the "nerf port" I'm gonna start calling it that from now on hahahahaha so good
Kerf, sorry, I call it that all the time, LoL. I quess old habits die hard or don't, LoL. Glad it's going to caught on. Thank you for your comment 😊
@@SubzPawz nerf sounds better hahaha
@@skyeisthelimit2 I like it myself, LoL 🤣
John, you guys should really spend the $120 or whatever it is now, on a Dats v3 as I've used the program for many years, and Woofer Tester 3 as well...same thing. It will really help you with seeing the real ts parameters and more. 👍
I will check it out. Thank you.
@@SubzPawz no problem. With as many sub reviews as you do, it would be beneficial to you guys. Can check ts parameters to know what they really are, help in enclosure design and so much more.
Here is an interesting thing I experienced. I'm setting gains with a multimeter as well as crossovers. With my amp set to 1500 watts at 1 ohm, I noticed the voltage dropped when setting the crossover. It did OK but seemed to lack out put and the amp showed clipping at my max set volume with the crossover set a little high around 110 hertz. I decided to close the crossover to around 70 hertz which seemed to drop output but also stopped the clipping. I was setting gains at -3 db with sonic 50 hertz tone on yt. So I tried setting the gain at 1800 watts , with the same tone, and closed the crossover to 70. Now it gets way louder and keeps better voltage without clipping. I fine tune with my bass know which also has the clip light. I am running a nvx loc with a signal clip light and have my rca volts set to 2v. I have been messing with it for months and assumed I was clipping due to power restrictions and never expected that lowering the crossover would allow me to boost my overall output
I'm thinking this may have something to do with the LOC. I just sold a sub to someone that had one installed in his BMW. He has all sorts of issues and my guess with his was the line out converter. I've never used one myself, always done a full deck install. That's odd though, maybe something common. I wish you were local, I'd Meetup and do a video on all my socials and see what everyone says.
Another theory I have is that lowering the cross over may help me keep impedance rise down and not overdrive the amp as easy? I really don't know why I can get louder. A sweep from 25 to 150 shows 35 to 40 is the loudest, I'm tuned at 39 or close to it and a decent roll off starting around 65 hertz. My subsonic is set to 33 but I'm running a loc from the factory amp subwoofer output. I tried to tap before the amp but it didn't sound right and voltage was low input but was like .5 volts. That's why I was setting the crossover around 110 to start with. Integrating a system into a factory setup is a nightmare. My radio runs my oil level reading, central locking, daytime running lights and windshield wiper installation mode. AUDI lol
@@SubzPawz that would be cool, im in eastern ky. I doubt we are close. Its always nice to meet people in the community. Anyway it's something to keep in mind if you ever run into it
@@TOLDyouSOagain I'm going to try that and see if it makes any difference on the SMD. I'll do it live on camera.
@@TOLDyouSOagain oh. I will. Yeah. We're in Massachusetts. My little brother moved to Kentucky so me going there might be in my future, who knows. I love meeting people.
I would like to see it take 1000w for 5 minutes to see if it will last. Or even 800 watts.
I can pull it back out and try some tests. I've had a few other people ask about similar tests with other subs too. Thanks for your comment 😊
Got one of these dual 2 and am going to try a trunk baffle. What do u think? Went from dual 12 alpine type s in a port to one 12 for space and needed more bass. Ended up with this but unsure of the baffle choice. Know a ported box would hit but I need trunk space. Hope all goes well
I'm not completely sure what you mean. I don't think it would work for an infinite baffle. You need some kind of enclosure. Let me in on more information. Thanks for your question and comment 😊
How do these hyenas compare up against the bb heavyhitters ? I’m only interested in the 12s keeping that in mind thanks
In those 2 subs really no comparison. You have a budget 12 and then a competition grade 12. I'll do a video of them head to head. Thanks for your question and comment 😊
Hey, I got a good question for you since I know you messed around with the seismic audio subs before. I currently have 3 GFC-122 subs on a smart3B amp. (after reinforcing the spiders to the coil with some E 6000 they pound!)and sounds good from 26hz to 46hz although I prefer the lows. I just ordered 4 Hyanka 15/4 how do you think they will measure up compared to the seismic audio?
Just tune them and ease up on your gains and bass. My only gripe about the HYanka is the 2.5 inch coil. As long as you're gains are set correctly you'll be fine and I think you're going to be pleasantly happy. Enjoy. Thanks for sharing and thank you for your comment 😊
That Skar vs series is a misprint for the sealed size.. just an fyi.
If you can tell in my voice as I'm reading it I'm hesitant saying it. But I wanted to read what they printed. Thank you for your comment 😊
Have you ever modified a small12-inch ported prefab (say 1.5cf) into a large 10 inch box by adding a speaker ring to fit the smaller woofer cut out? Been wondering how this would sound
Huh. Funny. I was just thinking about something like that myself 😂.
@@SubzPawz great minds think alike 😄
Would you recommend these for some 10s
I actually have the 10's 12's & 15's. I love each one of them. You will love them too. So yes, I would definitely recommend them. Thank you for your question and comment 😊
@@SubzPawz you think h yanka 10s or the CT 10 ozone will be better? Or ct shallow mount whatever series
You think 2-10d4 h yanka can compare to 2-10d4 ct sounds messo's??
My experience with the tropo would say the meso would be the way to go if those are the choices. Thank you for your question and comment 😊
@SubzPawz hate to bug you. I just want to get it right and be happy, what 2-10s d4 would you recommend for deep hard hitting bass since you've tested alot. $200ish $250 per sub?? Tia
@@ricefamily1381 I'd say one of my favorites were the Lord of Bass LB10. I think you're on the right track with the CT sound's subs. If I were you I would get D2 sub's. I know you'll be wiring to half ohm. With your impedance rise you're probably going to be running from 1.5-3 ohm's. If you get the D4 sub's you're going to be running from 2-4 ohm's, maybe even higher at times.
@SubzPawz d4 produce cleaner deep bass than d2? I thought d2 make loud . Idk, thanks
Have you all messed with ds18 subs
Yes. Not many but a few. I will test more eventually. Did you have any suggestions? Thanks for your comment 😊
Yes like the exl-x12.4d The gen-x12.4d And gen-xx12.4dhe maybe the zx112.4d high excursion I'm looking at these to put in my kids s10 extended cab but do know anyone that has some
@@terryheck9507 the GenXX I've tested on the channel. I still have it. I can test it again. The SLC I think that's what it is I tested. They all did their job. I'm sure the big boy's are just as reliable.
Ok I'll look for it thx
@@terryheck9507 awesome thanks 🙏
its same motor ,coil and spider for the 10,12,15 just bigger basket and cone . wich is fine because just about all the companies use the same build house Jiaxing Jinlida Electron Co., Ltd.
I think looking at them in front of you your eyes want to see something different because one is bigger than the other. I looked them up after the video and yes all the same bottom features. Not sure about build house. That got me stumped. I looked up multiple different times and could find nothing supporting it is right or wrong. Jiaxing Jinlida makes subs and is their own Ltd Co. Ninbo HiYanka Acoustic is another Ltd Co. Both have different addresses and different Warehouses. Both make subwoofers of their own kind and look nothing alike. Other than that I couldn't find anything else. Thank you for your comment 😊
@@SubzPawzJLD makes subwoofers for MANY brands, and one of the most popular brands. JLD(Jiaxing Jinlida) doesn't manufacture Hyanka subwoofers though. JLD supplies a wide array of subwoofers to brands world wide. They're the leading vendor.
looks like a skar evl knock off
I don't ever like to knock down a subwoofer or a company that made the subwoofer. I bought the evl a few year's back thinking it was the answer I was looking for. For me it was more hype than what I expected to hear. For everything it has and the look it has I expected much more and was left wanting more for my money. Now the HYanka on the other hand is half the price and IMO a better sound and a better subwoofer in general. I now own all 3 of the subs they make and each one impressed me. A smaller voice coil than the EVL and a better sound. I might have to get another one probably a 15 and get it in the new comparison video I'm going to be doing. Thank you for your comment 😊
I've been watching reviews on all the hyanka and they don't hold up for an extended period of time the evl has not failed me in the last year of daily abuse and still holding strong hyanka can yank me
@@shawnst.martin7526they do hold up just fine I have 4 12 D2 hyanka D2 subs on a Wolfram aw 9000.1 d and clamp 12k watts they held up just fine. I even have 2 12 and 2 10 hyanka in my man cave in the basement on 3k watts and they dam near shake my houses foundation apart.
@@shawnst.martin7526it is nothing like the evl. They both have a 12 spoke basket and that's the only similarity. The EVL line is a parts bin subwoofer that is highly inefficient. China Future Sound, (the build house( will sell them(15") for $40 with an moq of 100 with a plain dust cap.