We rescue another
HTML-код
- Опубликовано: 8 сен 2024
- We drag another @JohnDeere 455 crawler loader out of the weeds. Its in need of some major attention especially in the undercarriage department! Follow along as we drag it home and get it stuck in the shop. Stay tuned for the next vide to see if it runs again.
Thanks for watching
Facebook
/ candcequipment
Instagram
/ ccequipment
Website
www.ccsurplus....
Email
Sales@ccsurplus.com
10:38 Daddy always said "grind em till ya find em"
Trans has left the chat bub
Mine always said “maybe next year they’ll invent rubber gears”
Sometime the manufacturer machines the gear too big, the operator needs to fine tune it. Don’t ask me how I know
@@ko9446 lol
The adventures of Kevin and Clint. Tucker and Hunter seem to be enjoying their time in the shop this summer.....well, maybe most of it. Lol
I think they might have been ready to take a break and get back to school 😂😂😂 but they sure worked hard this summer ! Thanks for watching!
@@mrsclinton Yeah right....we all looked forward to going back to school. 😁😁😁
Wow,....that young boy sound smarter and talks better that Kevin! Yep, yep! Lol
Lol
That’s a new way of grading the drive in the opening shot 👍😀
For sure
Clint, you drove right by my house and I bet you didn't even wave. Now my feelings are hurt.
Oh snap
Gonna make a nice track loader. And the great thing about it is no def ,sensors or modules to worry about
Yep for sure
Sweet, another Clint and Kevin rebuild rescue. Can’t wait to watch the awesome adventure
Can't wait to see this baby roll out looking and running like a new one. Awesome job Clinton/Kevin!!!!!
Thanks
I miss that cat sound and fuller 18 speed like i had in my dump truck.🇫🇮 Now i am retired and have time to watch your awesome videos🙂
It’s the best
What makes your channel so interesting to those of us in the U.K. is your road trips. Your filming of the entire journey to collect these machines is a great part of your videos and compliments the filming of the machine repairs and rebuilds . I have visited your country twice now but for those here who have not , (here in little old Englandland ), they are often astounded at the similarity at your country side to our own. This video could in fact have been shot in the Shakespeares own countryside of Stratford upon Avon.
Beautiful countryside and quaint villages but you have actually less road pot holes than we do!!!
Do keep your road trips part of your videos.
Last but not least those loading ramps were probably sharp enough to peel spuds on after you had dragged them half a mile in the gravel trying to find a level spot to load easily!!!😆
Great video chaps. Looking forwards to the next.
Lol
That’s cool
You make the very difficult look...easy! Your videos are always educational. Thank you.
Excellent demonstration of your trailer's abilities to rescue dead equipment! Thanks for sharing!
Yep
Thanks for watching
In the words of Flounder: "Oh boy is this great!" :))
Well Kevin looked on out of the window and he started counting phone poles
Goin’ by at the rate of 4 to the 7th power.
Well he put 2 and 2 together
And added 12 and carried 5,
He came up with 22,000 telephone poles an hour.
Clinton and Kevin great job great videos keep saving that old iron, outstanding driving that trailer you put it were you want
Clint, You kept mentioning Snatch Block when you were loading and unloading that crawler. I always thought Snatch Block was a birth control device!
Lol
That was a tough pull with one track locking up. Great video of the retrieval. Can't wait for round 2.😁
Plenty more to come
I can't really speak to Clint's driving abilities, except for his shifting gears, I watched him like a hawk in a couple driving video's, and he does it as good as anyone I've ever seen, I didn't see him rack one gear,👍, he's a pro for sure, btw, every able-body male in my family is/was a truck-driver, great video guys, and thanks for sharing.
hell ya another resurrtion of a good ol track loader. Thanks Clinton for saving the loaders.
We are trying
You did it because you know what to do to show her some much needed love and you will turn her into a good working machine again.
Job well done Clinton
You should see the limestone caves in Kansas City Missouri. You can drive all day in one storage cave. You can’t believe what is stored in these caves. The Government and Military have supplies everywhere. I have one that they have been taking limestone out of for years by the Missouri River. I can cut across country and make it to that cave in 13 min. If we ever go nuclear fireworks that’s where I am heading. -40* below 0 and it’s 56* all the time.
Hey There C&C Guys, I Hope This Finds You All Well? 🙏
Clinton my friend, have you ever heard of a "Winch Damper" if you have, why in the world dont you have one?
And If you haven't, you need to look it up, and get one.
There's nothing more dangerous to people and equipment, than a snapped winch cable!
I hope y'all have a good one!
"Nothing Runs Like A Deere"
🦌 👍 🇺🇲
Another cool 😎 video and now I know where the capital of the best lime stone is Indiana state 👍😎🇺🇸NY
Thanks guys fun video
When you and Kevin get together it's entertaining keep it up
Kevin's new chirstmas ornament.
Good job 👏
Love the Pet great Jake on it
You might want to add a second air switch for your differential locks. We always split them up for Alaska. In the winter you can lock you interlock in and lock the rear drive axle. That got us up grades without spinning out and you still could get around a corner. With the rear axle locked you could grab the rock on the shoulder or in the center of the road to keep going. We rarely put chains on for the grades and the Cassiar had a couple 12% stretches. The Burrage was always fun. You had a 12% going down and across a steel deck bridge and up a 12%. You tried to center yourself up and hit the bridge at about 60mph and it got you up when it was solid ice and snow.
Not a bad idea
Standing by for this restoration.. hopeful restoration.
Fingers crossed
Love the southern part of our state, Brown Co. Patoka always vacationed there.
“What did I get myself into again?” From my perspective, I say “exactly what you wanted to.” I would do the same, slow season coming on, and as fast as that last one sold I would’ve been on that like gravy on potatoes🙄😏😉😆 not to mention it makes great video fodder to. I will be watching this series for sure. Thanks for the ride along sir.
Thanks
Plenty to come
Nice recovery Clint. I bet you make a lot of folks happy with affordable "slightly" used refurb's. Looking forward to the refurb.
Super nice truck and trailer. Good video.
Thanks
Video take away.
-Got to love it, three minutes into the video and the sign says DEAD END.
-That's what happens when you don't bay your bill.
-It will run.
Great video.
Lol
Thanks
Another fine job and video....Thanks
I love the sound she makes when you decel… for once Mr Sausage fingers cannot be blamed for the low grumbling sound… even though he was plagued by the wind in the copilot’s seat.
Great video. Really love that trailer. Someone with knowledge of hauling equipment designed that bad boy. We will be waiting for the repair videos. Thanks for sharing, Clinton.
Thanks
Stay tuned
It's either another interesting project or another John, Oh deer!
Enjoy your channel
Thanks
That kitty cat sounds fantastic
Thanks
I cant wait to see that poor abused dozer run again, thanks Clint and team, another good video under your belts well done guys, you do need a young enthusiastic female engineer though maybe two.
😁
All I can think of is having track frames upside down on horses digging broken bottom roll bolts out. Don't miss it even a little bit.
You nailed it
Look forward to following the rebuild thanks for sharing 🦘👍
Thanks for watching
Enjoy the ride Clint and hope to see it if it runs .
Stay tuned
She was a fighter but no match for the c&c crew! It amazes me when it’s a decent machine and someone can’t figure it out then the start the parts pilferage on it. Looks like some more great track loader videos are in my future thanks guys!
For sure
Stay tuned
Need a remote that works on Kevin, need a get back to work button, enough of your lip button, not listening to you button. Then there are days where it's "ok I really have had enough of you, I am off to an auction." Lol 😆
Yep lol
Oh my this is going to be great Clinton can’t wait to see the new video lol
Stay tuned
The fun fact was pretty cool to learn i didnt know about being lime stone capital. I do know that their is a quarry in Lapel that supplied for Interstate 69 being built from Castleton to Fort Wayne but its not a active quarry now
Clinton Kevin and boys great video! Thanks for sharing! Kevin
Thanks
Thanks Clint for the share 👏👏👏👏👍🇬🇧
Thanks for watching
Good video Clinton enjoy the rescues !
That's a cool little dozer you found yourself there Clint
You had to go out into the Boonies to find this one, it won't look like this when you guys get done with it. Love the video and look forward to the follow up on this one.
Plenty more to come
Greetings from Central NH Lakes Region - I am looking forward to this project. The last 455 was such a honey when it was completed. I love those machines and if it were not two weight classes above what I can use, I would be on the phone negotiating an option to buy agreement with Clint today!
Thanks
You're not the only one. When I get my farm in the near future, Clinton will be the first dealer I call.
I hope you are able to get her running & she proves worth fixing. Since I am not knowledgeable on the mechanics of these machines, I am interested to find out about the problems on that one track. Oh by the way was interesting on how your new grader 😉😉 performed at the pick up.
Yep
It worked great 😁
Hey Clint great job on getting that loaded that looks like a project 🙂👍👌😎✌️🇺🇲
For sure
Looking forward to the build 🦌👋🇨🇦
Stay tuned
Hi from uk guys 👋 👍 how many torques got you up the gravel (""all them"")🤣and the driver of that little dump truck needs to learn how to either clutch or float lol the only thing floating was the input shaft of the synchro gear wall 🤣🤣 but can't wait to see journey on this one 👌 and loading it was like no not another home am not tracking straight and back at shop it like yeyyyy am at C&C shop al roll in there no problem 🤣🤣 thanks for your time be safe and see you soon 👍 👋
455G is my favorite track loader , im excited about the series
Plenty to come
Great video I love how you steer with the snatch block GREAT IDEA 💡 ALWAYS A JOY TO WATCH
Yep thanks
Another C & C project. All practiced up on the first one so this one should go twice as quick (HaHa). good luck guys .As always great video.Stay safe.
here we go again
Can't wait to see part 2 of this video
Plenty more to come
an other great project to watch you work on 👍👍👌
I am sure it will run just fine because you know your stuff
Let’s hope
have a great week. Another great video guys!
Thanks
Gonna be a good series I think… looks like runner
Let’s hope
Cool, like these track loaders.
Can't wait to see you tackle the 455G!
Stay tuned
Great video. I look forward to seeing the surgery that you'll have to perform to bring this one back to life. Thanks for sharing.😀
Thanks for watching
They keep following you home. Literally.
They sure do
Great video like always
Nice project. Looking forward to the videos
Let the battles begin.
Clinton it was nice to get the low down on the trailer and then get to see it in action. It will be another good project.🦾👏👍👍👍🥳
Thanks
8/9/22. Glad u got that JD455 with missing track rollers safely home & unloaded...that is a mess when tracks/intermittantly cannot move ! I was yelling at my cell phone while watching the pulling/dragging/scrapping...then once inside yur shop...the next shop improvement became apparant...turntable...yup...that would have been handy on this bad boy. Keep us informed on problem & repair on this fine looking unit. Not mentioned was #hours on machine. Stay safe Clint & carry on sir!👍👍👍🛠⚙😊🍺
Thanks
5500 hours
Another great video that you guys make so easy. We be waiting for upcoming episodes
Plenty come!!
Recovery & driveway grading!
Made for great viewing as always guys and yes am looking forward to progress videos on this bro. Safe travels
Nice tag trailer. I like the ramp set up
Thanks
You backed that trailer up the hill to that G like you were the repo man👍🏻😆
Lol
You may wonder why, but we know! Thanks for your understanding!
Fix it, make it run, make it shine!!!!
We will try
Hope so I hope it works it looks beautiful
Great video hope you have good luck getting it going for resale 👍🏻🇺🇸
Thanks
Nice recovery
Thanks
Cool, I have the sister to this 455G I got recently. Everything the same except the clamshell bucket. Need an Idler. Also the master track link has a broken bolt so can't get it apart easily. Once I get the track apart, I might hit you up for parts.Mine was a ran when parked. I replaced the batteries and cleaned the negative battery cable connection. It started right up. runs really well. Hope you get your 455G running. I would love to see you fix it. I am learning a ton from your channel.
Yep stay tuned because you don’t want to miss upcoming videos
Clint and Kevin find them and fixem segment brought to by C&C equipment and today's sponsors are John Deer, Peterbuilt and Round Gears ⚙️ like we say if you can't find them make knew one's 🤪🤪🤪🤪
That’s right 😁
oh boy Clint!! We have a project and a half here lol.. cant be any worse than the other one which had the engine full of water can it??? Highlight of the video... Kev singing "Convoy" .. and the atv on the barn roof!!!
Lol
Yep
Projects like that l think are the best ones you guys do but shoot everything else is great as well.
Thanks for sharing
Nice job gentlemen! I bet you stole that one Clint!
It’s a gamble on these things for sure
that truck sounds bad ass
Thanks
That Pete of yours is one sweet sounding gal.
Thanks
Can you put the backhoe attachment on any 455g if it has the ripper attachment as an option… that would be a killer combo.
I liked It r lot
I only dream of having a shop big enough to push a track loader around with a backhoe 😂 You probably already know this, but if you hook the snatch block to the tractor and run the winch line back to the front, it's a lot easier on the winch.
Yep for sure
This wasn’t much of a load for it
When you said snatch block, that's not exactly what came to mind.
Lol
MM77 Approved 👍🏼👍🏼
im sure it will run kevin is pretty handy lol