Great to see GPU water blocks for non-high end gpus such as 3080/90 etc for a change as it’s almost impossible to find water coolers normally for 60 class gpus😭. Well done to Bykski ❤🥰👍. I personally use their all-in-one cpu waterblock-reservoir-pump combo units and they perform exceptionally well 😇👍.
@12 floors a couple of the 2060 models do have waterblocks mainly the EVGA cards and a couple of the blower cards according t9 the corsair site also the 2060 Suoer FE works with a 2070 block as its a identical PCB providing using reference design I'm cosindering doing black fittings for the FE 2060 super as I can see this thing being OC to above 2070 levels if cooled properly
looking at the Bykski water block for my 3070 ventus x2. its the only real option so was good to see a video on there product, yeah I know different model but it helps all the same.
Is cool but purpose of TIM is to fill the micro dips and valleys between copper and gpu. Dont pile it on like toothpaste. just s super fine later is ok. This much will squeeze out, short out of its metallic TIM and or insulate a little.
Hi STS, great job here. I'm not into custom water cooling as mostly impractical in SFF cases. Maybe something I'll consider in future. Love your channel ❤️ keep up the good work
Yikes you don’t want to create bubble applying past like that also it would of been useful to know the size of the thermal pad I’m trying to figure out the sizes right now.
Its ashame that water block adds alot of height to the card. Really stuck on keeping my small build running cool and I hopped this was the asnwer with external water cooler hidden in behind my media cabinate
240 is fine, I had a ryzen 7 and a vega 64 both on the same 240 mil loop and temps were below average across all hardware. Although I reccomend 360 in case you want to expand later. I myself have used byski waterblocks several times. I like them a lot.
hi do you have the same card i have asus Dual GeForce RTX 3060 Ti V2 Mini oc i have heat problems also did you get better temp after renew thermla pads
probably better to use your own quality paste anyways. My bykski block for the xfx 6800xt also didn't come with the spreader or any paste. My lord that card is so dam tiny!
Do you have done any testing with this Waterblock yet and can give us some information about temps? I use the Gigabyte 3060ti Eagle OC with Bykski Waterblock and my temps are pretty high. 65°C on GPU in Furmark. Fans nearly 100%, Pump 100%, on a 280mm Bykski radiator in SSUPD Meshlicious Case.
@@Aeonia92 Yes I was able to lower my temperatures. I reinstalled the block and applied better thermal pads (EC360® Silver Soft) and thermal paste (Thermal Grizzly Kryonaut). And I was very careful to tighten all screws evenly during installation. Now i have max. 53°C on the core with 1000rpm Fan Speed.
way too much cooling paste, too much can actually have a negative effect on cooling and to top it off it's not evenly spread which can also cause issues.
Olá, abaixou muito a temperatura? tenho essa gpu e quero colocar esse water cooling... Hi, did the temperature drop a lot? I have this gpu and I want to put this water cooler...
Eaí man, como que ta a sua placa hoje em dia? Eu comprei ela mas ainda não chegou, só depois de comprar que fiquei sabendo da C°. Comprei um gabinete frente mesh pra ela...
hi do you have the asus Dual GeForce RTX 3060 Ti V2 Mini oc 2 and 3 mm i just changed mine but results didnt improve have you also tried changing the pads any improvements
@@jeff9635 Not right now, but i'm sure Bykski also has one, just check on their website. Well not every GPU is 100% the same, most of them aren't. Take screw locations, if there's one missing/somewhere else, you're done. Plus, a GPU block will be directly screwed onto your GPU DIE, and that thing being "fragile" you want to be absolutely 100% sure that the block you're using was specifically build for that fitting. Imagine the block breaking your Chip into pieces just because the screws were too tight.
Great to see GPU water blocks for non-high end gpus such as 3080/90 etc for a change as it’s almost impossible to find water coolers normally for 60 class gpus😭. Well done to Bykski ❤🥰👍. I personally use their all-in-one cpu waterblock-reservoir-pump combo units and they perform exceptionally well 😇👍.
@12 floors a couple of the 2060 models do have waterblocks mainly the EVGA cards and a couple of the blower cards according t9 the corsair site also the 2060 Suoer FE works with a 2070 block as its a identical PCB providing using reference design I'm cosindering doing black fittings for the FE 2060 super as I can see this thing being OC to above 2070 levels if cooled properly
I have the same GPU shown in the video. Is there a AIO available for that?
Great review. One of the best and most honest product reviews in a respectful manner. Very well done. Thank you.
Greetings from Australia. I'm one of the 5 people looking to do this with my 3060 Ti. Thanks for the video, it was very helpful!
is it worth it?
How did it go? Temps? Performance?
did you do it
how was the temp results
does it worth
Looking forward for the finish build
Looking forward to that build and thanks for posting since I was planning to get the same GPU block from Bykski.
Glad to hear that!
They will come later this month :)
Im using byski water block since 1080ti series until now 3070ti, Performed well, reasonable price,
looking at the Bykski water block for my 3070 ventus x2. its the only real option so was good to see a video on there product, yeah I know different model but it helps all the same.
Amazing! I was looking for that and you already did it 😁
Is cool but purpose of TIM is to fill the micro dips and valleys between copper and gpu. Dont pile it on like toothpaste. just s super fine later is ok. This much will squeeze out, short out of its metallic TIM and or insulate a little.
When you watch a video and have the same thought, go to comment and see your own comment lmao
Hi STS, great job here. I'm not into custom water cooling as mostly impractical in SFF cases. Maybe something I'll consider in future. Love your channel ❤️ keep up the good work
Wow, it's so cute and compact!
Мужик, спасибо за обзор. Очень помог !
Okay
Yikes you don’t want to create bubble applying past like that also it would of been useful to know the size of the thermal pad I’m trying to figure out the sizes right now.
Its ashame that water block adds alot of height to the card. Really stuck on keeping my small build running cool and I hopped this was the asnwer with external water cooler hidden in behind my media cabinate
hi, great job, but what size of radiator should be suitable for the best temp dropping? 240mm?
240 is fine, I had a ryzen 7 and a vega 64 both on the same 240 mil loop and temps were below average across all hardware. Although I reccomend 360 in case you want to expand later. I myself have used byski waterblocks several times. I like them a lot.
It looks like the pcb is shorter than the heatsink. Can you please post the length of the card with the waterblock installed?
I've de-installed the block already. But you can take the Waterblock's width and add 1-2mm due to the PCIe bracket
What was the thickness of the pads?
hi do you have the same card
i have asus Dual GeForce RTX 3060 Ti V2 Mini oc i have heat problems also
did you get better temp after renew thermla pads
probably better to use your own quality paste anyways. My bykski block for the xfx 6800xt also didn't come with the spreader or any paste. My lord that card is so dam tiny!
Probably, the 3070 block came with a syringe of generic stuff. Never compare them directly but I'm sure you're right on that one.
And, oh yes
Do you have done any testing with this Waterblock yet and can give us some information about temps? I use the Gigabyte 3060ti Eagle OC with Bykski Waterblock and my temps are pretty high. 65°C on GPU in Furmark. Fans nearly 100%, Pump 100%, on a 280mm Bykski radiator in SSUPD Meshlicious Case.
no answer.. no info :( how do we know these are any good
Did you manage to lower your temps?
@@Aeonia92
Yes I was able to lower my temperatures. I reinstalled the block and applied better thermal pads (EC360® Silver Soft) and thermal paste (Thermal Grizzly Kryonaut). And I was very careful to tighten all screws evenly during installation. Now i have max. 53°C on the core with 1000rpm Fan Speed.
@@christophscherpf4201 65° C high? LOL i am getting 80° playing battlefield 2042
@@diego450one well, then i think, something is mounted wrong. i would check this.
very very cool !!
Holy thermal paste batman.
way too much cooling paste, too much can actually have a negative effect on cooling and to top it off it's not evenly spread which can also cause issues.
Better to have too much than too little, especially for a bare die
can i change the rgb strip from the card or no
sure, it's 3-pin ARGB. You can control it with your mobo software
Olá, abaixou muito a temperatura? tenho essa gpu e quero colocar esse water cooling...
Hi, did the temperature drop a lot? I have this gpu and I want to put this water cooler...
Eaí man, como que ta a sua placa hoje em dia? Eu comprei ela mas ainda não chegou, só depois de comprar que fiquei sabendo da C°. Comprei um gabinete frente mesh pra ela...
will this fit my small Zotac twin edge 3060 ti?
So what do you actually need to get this ? its not a standalone part is it ? you need seperate water cooling to attach it too ?
No this is just the GPU block, you would still need some sort of reservoire, pump, tubes, fittings, radiator and fans
@@STSYT ah too bad.. its gonna be to costly, was hoping for a standalone solution
e o resultado das temperaturas?
ruclips.net/video/zixDjPxZZDo/видео.html
No RGB !!!
Heyo, I wanna fully water cool my system as well, I5-11400 with a rtx 3060 evga xc, thoughts?
Y don't you just fold some paper to use as a spatula? I'm doing this for over 20 years... I'd never put that much to on my cards😂
He forgot to place thermal pad on the memory vrms.....shame....its a dual phase, mosfets on the opposite side of the vcore vrm
Здравствуйте,а на ASUS PH-RTX3060-12G-V2 mini с одним вентилем,этот водоблок подойдёт?
Would this work with 3060 Ti FE?
will this work for asus ko 3060
Grüße aus NRW
It's called a spatula. The translate shouldn't was correct.
Amigo , poderia me dizer a espessura do thermal pad original que vem na placa ?
Hi. Thx for the video. Can you tell me what size thermal pads did u use for this card? I am just trying to replace the thermal pads only.
did you know it now?
@@VTECINSIDE999 Nope xD Can't find any info on it
How bout now? Did you ever found the pads? I'm looking to deep clean, repaste and pad mine.
hi do you have the asus Dual GeForce RTX 3060 Ti V2 Mini oc
2 and 3 mm
i just changed mine but results didnt improve
have you also tried changing the pads
any improvements
Can a source with a capacity of 550w use this VGA card?Thanks!
It all depends on the configuration. Use the power calculator (example www.bequiet.com/en/psucalculator), For 3060Ti a 650W PSU is recommended!
will this block fit any 3060 ti? I'm after a water block for the palit dual 3060 ti and wondering if it will fit
No, GPU blocks are usually PCB specific.
There are generic blocks, but those look very differently
@@STSYT do you know of any water blocks which would fit my gpu?
@@STSYT also what makes a block not compatible with a certain gpu?
@@jeff9635 Not right now, but i'm sure Bykski also has one, just check on their website.
Well not every GPU is 100% the same, most of them aren't. Take screw locations, if there's one missing/somewhere else, you're done.
Plus, a GPU block will be directly screwed onto your GPU DIE, and that thing being "fragile" you want to be absolutely 100% sure that the block you're using was specifically build for that fitting. Imagine the block breaking your Chip into pieces just because the screws were too tight.
@@STSYT ah ok thanks
Spachtel.. yeah thats a Zungenbrecher isnt it haha. ;-) Gebe zu ist mir auf Anhieb auch nicht eingefallen ...
Wärmeleitpastenspachtel geht doch über die Zunge wie Wasser. Müsste es aber eigentlich nicht Spatel heißen?
Haha So Cool :D Weiter so :)
Я майонез на хлеб не так много мажу как автор видео мажет термопасту на чип видеокарты))))
What kind of memory is there? MP or CS? overclockers.ru/st/r/800/-/legacy/blog/211245/308337_O.jpg