@Austin and Company, thanks for making these awesome Housings , just got mine and boy oh boy tell you what! These things are beautiful!! Perfect fit and finish for my HX35 and yes it will be going in an odd ball car : 1994 Mazda 323 2.5 V6 KLDE swapped
Please I need your help, I put an hx35w in my car and I have a lot of lag, what housing can I put to reduce the lag and if you sell it, where can I buy it
Not sure why you went from twinscroll to single? Twinscroll is such a benefit on bigger turbos. I realize there aren't as many EMs that fit them, though.
Turbo Lab America Makes sense. TS really is a great way to run a comparatively larger turbo and still have lower boost threshold and more responsiveness, though. I wonder when variable-geometry turbos will hit the aftermarket for a wide variety of platforms?
Hey Guys, so I have rare 8cm2 twin scroll holset t3, if I wanted to go external gate rear housing what a/r would I need to match the spool of the holset, would it still be better having the twin scroll?
i bought your rebuild hx kit haven't revuilt my turbo yet because i want to upgrade my wheels. i have a t3 .063 housing on my hybrid hx40/35w and want to upgrade that to a .82 a/r t3 3" vband. my question is what will it cost to send you my turbo and have it come back as a 6767 with this .82 t3?
i'm currently running the 14 cm twin scroll with external wastegate and v band flange. The turbo spools up @ 3700 rpm can i get any benefits with this housing?
Sweet! Looks solid. Just curious, do all hx35s have the same size exhaust wheels? I have a 45ish mm HX35 that cam from a non intercooled truck. I bought a 56/83 (cold side) 70/60 (hot side) Hx35w center cartridge and I was wondering if my 14cm T3 divided exhaust housing will work with the 70/60 turbine wheel.
The Hx35 turbines are the same for the dodge with the Cummins engine, the compressor wheel varied from 54x78 to 56 x 83mm. There is an Hx35 on a marine (boat) that has a 56mm turbine, and some hx40s on marines have 62mm turbines rather than 64mm ones
Is there an additional charge for machining this particular housing? Looking to run two of these on a Dodge Cummins as the primaries in a triples setup. wanting to use the 76x64 turbine and the 62x86 compressor. Currently running he351cw on manifold and feeding it with 2x 54mm 7 blade hx35. Looking to upgrade hx35s to 62x86/76x64 with 2 of these .83AR housings. looking to upgrade he351 to 67x89/76x67
We have the same housing machined for the 64 x 76 turbine. We can machine them for the 67 x 76 turbine but we don't charge you for that if you buy the housing
this looks like a good mod,I'm currently running a 12cm housing with external wastegate on a 1jzgte. Surprisingly the turbo doesn't spin at idle (700 rpm) hope this allows it to spool at idle.
So I have a H1c turbo and I’m picking up my Hx35 this weekend. What all is interchangeable with them? And what are some benefits of interchanging parts? 1993 12 valve Cummins swap. Thanks
Tge hx30 turbine is smaller 58 x 65 I think. I think it's the same turbine as the he351cw he341 and hy35 but I think the hx30 may have a vband connection like the hy35 he341 he351
It fits the hx35 turbo but there outlet doesn’t fit thee dodger down pipe. The inlet fits the 5.9 manifold though. We include a vband flange to weld onto a downpipe
Awesome idea, I was just wondering do you offer any option with a divided housing? I am looking into the twin scroll set up to help with spool
@Austin and Company, thanks for making these awesome Housings , just got mine and boy oh boy tell you what! These things are beautiful!! Perfect fit and finish for my HX35 and yes it will be going in an odd ball car : 1994 Mazda 323 2.5 V6 KLDE swapped
Please I need your help, I put an hx35w in my car and I have a lot of lag, what housing can I put to reduce the lag and if you sell it, where can I buy it
Do you have a link to a compressor map when used with this housing?
Not sure why you went from twinscroll to single? Twinscroll is such a benefit on bigger turbos. I realize there aren't as many EMs that fit them, though.
hx35 is a small turbo.
+Numinous because the majority of people aren't using a divided manifold
garyhowe88 "Small" is relative ;-) Depends on your application, really.
Turbo Lab America Makes sense. TS really is a great way to run a comparatively larger turbo and still have lower boost threshold and more responsiveness, though. I wonder when variable-geometry turbos will hit the aftermarket for a wide variety of platforms?
Do you offer the same housing in t4 flange?
do all hx35s come with a t3 flange stock?
Hey Guys, so I have rare 8cm2 twin scroll holset t3, if I wanted to go external gate rear housing what a/r would I need to match the spool of the holset, would it still be better having the twin scroll?
Well have a he351w same spec as a hx35 is it possible to get a twin scroll 9cm to fit the same turbo
a/r .82 is 10cm2.?
i bought your rebuild hx kit haven't revuilt my turbo yet because i want to upgrade my wheels. i have a t3 .063 housing on my hybrid hx40/35w and want to upgrade that to a .82 a/r t3 3" vband. my question is what will it cost to send you my turbo and have it come back as a 6767 with this .82 t3?
I've noticed this is a 6 bolt housing. Will this still work if my cartridge has the 4 bolt setup?
The amount of bolts doesn’t matter, you just need the matching clamps
i'm currently running the 14 cm twin scroll with external wastegate and v band flange.
The turbo spools up @ 3700 rpm can i get any benefits with this housing?
Fvi E36 what exhaust manifold are you running on your car?
What engine
I got one on the way for my Mustang SVO engine and hope its compatible with the HX35w version.
Yes it fits. The only hx35 it won’t fit is the marine version it may not fit, the marines had smaller size turbines for the Hx40 and hx35
Turbo Lab America Awesome! I appreciate it. Can’t wait to run it!
Sweet! Looks solid. Just curious, do all hx35s have the same size exhaust wheels? I have a 45ish mm HX35 that cam from a non intercooled truck. I bought a 56/83 (cold side) 70/60 (hot side) Hx35w center cartridge and I was wondering if my 14cm T3 divided exhaust housing will work with the 70/60 turbine wheel.
The Hx35 turbines are the same for the dodge with the Cummins engine, the compressor wheel varied from 54x78 to 56 x 83mm.
There is an Hx35 on a marine (boat) that has a 56mm turbine, and some hx40s on marines have 62mm turbines rather than 64mm ones
Is there an additional charge for machining this particular housing? Looking to run two of these on a Dodge Cummins as the primaries in a triples setup. wanting to use the 76x64 turbine and the 62x86 compressor.
Currently running he351cw on manifold and feeding it with 2x 54mm 7 blade hx35.
Looking to upgrade hx35s to 62x86/76x64 with 2 of these .83AR housings.
looking to upgrade he351 to 67x89/76x67
We have the same housing machined for the 64 x 76 turbine. We can machine them for the 67 x 76 turbine but we don't charge you for that if you buy the housing
Do you have a website?
this looks like a good mod,I'm currently running a 12cm housing with external wastegate on a 1jzgte.
Surprisingly the turbo doesn't spin at idle (700 rpm) hope this allows it to spool at idle.
+MrRayden6 that sounds like an exhaust leak before the turbo or your wastegate is leaking.
So I have a H1c turbo and I’m picking up my Hx35 this weekend. What all is interchangeable with them? And what are some benefits of interchanging parts? 1993 12 valve Cummins swap. Thanks
The turbine housing and matching actuator, piston rings, journal bearings, and turbine shaft are interchangeable, that’s it.
Turbo Lab America thanks for the info
this might be a dumb question but will this exhaust housing work on a hx30 exhaust wheel?
Tge hx30 turbine is smaller 58 x 65 I think. I think it's the same turbine as the he351cw he341 and hy35 but I think the hx30 may have a vband connection like the hy35 he341 he351
Will this work on a HX35w with 12cm housing
It fits the hx35 turbo but there outlet doesn’t fit thee dodger down pipe. The inlet fits the 5.9 manifold though. We include a vband flange to weld onto a downpipe
Turbo Lab America Thanks 👍🏻
Can this be modified to fit the HX55
No
So I can throw my 19 cm H1c exhaust housing on my hx35w?
Yes
Turbo Lab America
Thank you
How to contact you???
82ar is smaller than 12cmº stock housing?
Miguel Arellano no a 12cm is .89 ar. Currently have it on my mr2
Can you make a hx35 ball bearing?
+Trials2Bmx mno
just to make it clear. this can be an option for the modified hx40 you offer correct?
+hinata32725 ruclips.net/video/EVyIrxQUjC8/видео.html
Very nice!
I would like to order a housing for my build do you have a housing for this part number #3534923
Which turbine wheel did you want it machined for?
How do I measure the wheel