Hyundai Sonata Door Panel removal
HTML-код
- Опубликовано: 11 сен 2024
- Panel Clip remover tool: amzn.to/2GrIqUl
if you need the panel clips click here: amzn.to/2SreCKF
If this video helped you fix your problem and save some bucks, then support our channel! Any size donations are welcome!!! Its simple and quick just click the link and select amount.
www.paypal.me/...
Or check my store here:
/ @garageboys
Don’t miss the chance to be a proud supporter of a good cause!
Also like and subscribe
-----------------------------
This video will show you how to open the door panel on a 2006 Hyundai Sonata what is video you can fix your window fixed your door handle interior exterior and fix any other attachment that goes in the door panel it will show you the tools you require and every bolt size and screw size. if it helped you please subscribe to our channel
for Business inquiries email me at: Garageboys281@gmail.com
Disclaimer: Due to factors beyond the control of GarageBoys, I cannot guarantee against improper use or unauthorized modifications of this information. GarageBoys assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GarageBoys recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GarageBoys, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GarageBoys.
53 seconds in and realising which step I skipped. Thank you!
Great tutorial .The best explanation as compared to others. However, I needed to see the entire window regulator removed. You went right to the door lock situation you had. BUMMER !! Thanks for the tip on securing the window. Nobody else shows that. Guess they want to create more business for the glass industry.
Super . Thanks for helping That was a great video. I’d watched several videos but in none of them shows we need to loosen the two bolts for the glass holder. That was exactly the hint that I needed. Thank you so much
Hi. That was a great video. I’d watched several videos but in none of them shows we need to loosen the two bolts for the glass holder. That was exactly the hint that I needed. Thank you so much.
Glad I was able to help, if you can, help me back by liking and subscribing
Thank you so much for this video! Was looking all over and was glad to find your video. Replaced a driver side door that has a bad lock actuator didn’t know how to remove that inner panel for access and this video helped me tremendously.
Glad I could help 😃 if you can, help me back by liking and subscribing 😃
thanks good clear video
Useful video, lots of details. Sucks that the power window on these cars goes out in so many different ways. My panel has an issue with just the drivers side auto down. It sticks down and doesn't come up properly. Im hoping if I replace the buttons it will start to work again. Ill come back and comment again if I had any luck.
Thanks subscribed. My window wouldn't go up so I started taking it apart but couldnt get that second part off and I put it back together. I didn't want to mess with the motor but I guess I should have.
Thanks for subscribing 😊
Great video! Love the detail. Very helpful.
Watched this before diving into disassembling my car door to replace the exterior handle assembly. Wow, disassembling the door of a 2002 sonata was a lot easier than this. Although I couldn't find any videos that showed me how to take one apart; my car is so dang old. Thanks tho.
Garage Boys don't have a pic set nor door panel removal kit???
The 2 rivets closest to the door lock needs to be drilled out or the regulator panel won't come off.
Thanks dude
I loved your video. It was quite clear and very helpful but my problem is that the window cables inside got out of the track and snapped. I need to remove the inner panel completely. Any way you have a video showing how to get it off completely?
I don’t actually do it in the video but I talk about it and show how to do it. Go to min. @11:35 I mention that if you remove the 3 bolts on the side you can then wiggle it and slide it off to the right
Thank you so much for the help. I actually managed to get it done. Wouldn't have been able to without this video.
How do you unroll the window when that's problem you have with the door?
How do you disconnect the thick wire that cross from the lock mechanism to right side of the door in to the car ??
I have a 07 Hyundai sonata and my passenger door does not have an outside door handle. Not only that,, but I can no longer open from the inside or outside. What can I do here?
I'm having the problem that the window is all the way down and doesn't turn by hand. How can one removes the windows bolts in that case.
please get some plastic trim removal tools
My window glass is stuck all the way down & I can’t manage to pull it back up despite manually turn the gear where the motor was at. For my 11 hyundai elantra touring there’s no grip on the gear, Please help
Make sure showing a hole was black on the lock use flashlight
I got a 2009 Sonata on the passenger side door buzzes really loud when I put car in reverse or remote lock it. It's annoying but hella funny when in a parking lot and people are getting in/out of their cars because it scares the shit outta them.
I have a 2009 Hyundai Sonata. Both exterior and interior door handles are broke on the drivers side door . I can't open the door. What is the best way to cut out the door panel to unlock the door and replace the handles?
How do you take that inner plannal off ?
What if you can't roll the window down
keep watching the video I explain what to do in that case. or fast-forward to @9:25
Thanks for the info. I have to figure out how to get inside the door on my 2003 Sonata. Both the inside latch and the outside handle won't open the door. Yep, I have to try to remove the door panel because the door won't open.
Ouch, good luck and sorry I don’t have a video about that specific situation yet 😞 -let us know how it goes
@@GarageBoys I got it figured out. I took a reciprocating saw and cut the plastic handle and back plate off of the car. I reached inside and found that the problem was that the latch mechanism was corroded. A few months ago I found a very nice one at Pic-A-Part, along with a good door handle. I replaced the mechanism, and now I'm trying to find the handle. I must have put it in a very safe place, because I have no idea where it is now. I think that I saw it a few days ago.
If your window won't roll down, keep watching the video I explain what to do in that case. or fast-forward to 9:25
I just finished my window regulator, took me over 4 hours. I thought everything went well, I put everything back together, but my door lock works erratically, as if the cable is loose. Sometimes it locks fine but other times it doesn't, like it's weak or if the cable is loose, it doesn't click (loud) like before. I checked and the cables were put back fine. Any ideas? I'm not sure if that white plastic piece on the top left went in the right place next to the lock, could that be it?
It sounds like you need to clean your switch, check my video on my “Hyundai Repairs” Playlist about the Hyundai Santa Fe where I clean the connector for the gas cap door switch. It’s about the same mechanics and you have to do about the same thing for yours
@@GarageBoys OK I'll give it a shot, thanks for the advice and thanks for posting this video.
Thanks for the info.
My window doesn't work I tried to change the motor but no luck. I changed buttons and still doesn't work. What I should do?
I tried to put the motor on other door and it's working great so please if you have any suggestions I will be appreciated .
Have you tried to check the fuses? I think those cars have one fuse for each window
Power Window Regulator
Different for 05 and older
What u do if window doesn't go down
keep watching the video I explain what to do in that case. or fast-forward to @9:25
شرح كيف تركيب فريم السواق انترا 2006
Is it the same on a 2005?
Yes it is
different body design
My child safety is on the power window is not working,,door handle is broke....I'm screwed
قود لايك 🙋♂️
Its not satisfying video ,cuz u didn't show us how to remove the panel,which is the video name on!!
I did remove the door panel, look at the thumbnail. Door panel is the plastic cover that where you have the window and lock buttons. Maybe you are talking about the frame cover.