I have a predator hemi , with just a vm22, and a header, and it does 60+mph. im in Atl. Im from L.A. I miss riding in compton down alameda . shoutout to you bro. keep up the good work .
Wat gearing you running trying to get my mega moto right and I'm thinking of 15t clutch and 55t sprocket I want to do 60+ but still be decent on the take off
@@1of1minis did u remove the governor and wats your take off like and I have the ducar 212 with the stock 75t sprocket on the rear might just go with ur set up first thanks bro
@@1of1minis how r y'all getting such high speeds? my go kart has an 11 inch drive tire on 18/60 and im only getting about 45mph, on 12/60 I was getting about 30 top
That flywheel should be 32 degrees BTDC. So you should be at 36 degrees. Timing wheel is a good thing to have if you're sticking with this which I know you will. Have you tried ratio rockers? I got a set sitting at the shop I may use when I build one of my other engines.
Really wish I knew you needed to upgrade your rod before i removed the gov and added a carb, sadly for me i ended up blowing a hole straight through my engine. we win some we loose some !
I hit 62 mph on a fully stock 212 on a ct200u, it has no governor, 18 Lbs springs , carb and pipe ; got it on gps at 62 top speed , stock flywheel and rod
Max Torque gotta video on RUclips all about it, also shows how to cut the clutch shoes in half to double the contact area and create total lockup. My lil bike in the kitchen gettn some work. Good work braaah. ✌👍
@@RoyalJZ yeah i ain't trying 2 blow da motor. Wat kinda brakes u suggest? I jus ordered sum hydrolic. Was thinkin bout da band dat goes over da clutch 🤔
Bro my brother and law hit 65 with stock rod and cam stock head he had vm22 and straight pipe but I love the sound of your bike it's nasty love this video
Bouta try out a 265 Cam & 22pd springs on my stock motor just Got PWK 28 on it rn. What speeds you think I might hit? & is it a safe came to run w/o piston & rod
I'm ryden blu taco fram with makunic carb and pipe a dip waiting for 212 predator clutch and it's on frfr I did wanna keep twerk converter but don't weld so took it off so engine would line ...
Hey friend what did you do to get your bike to go from 50 miles an hour to 65 miles an hour, mine has a Cam but it’s gear different than yours so it only goes 55
That boy say he did his thang too that motor, keep building them, you'll realize that it's not always more money more power, I've done a budget build with a dino cm 265 cam $50 cam with ratio rockers the cheap stamped ones. Straight pulling the fuck away from big cam bikes 🤣
Dawg my 5hp briggs flathead engine after port polish sanding head/brow 26mm mukuni 8offset key mildest cam only drank fresh 93 that mf would knock without it
Naw bro I got 5 mini bikes but mine bigger then yours I'm from d.c You guys in La ride the little ones. I brake my Jackshaft off and straight chain it zip tie 38 back sprocket racing clutch racing chain from go power sports boy I'm doing 71 mph don't need all that🤷🏿♂️💯 you lose torque but my top end is crazy💨🏍💨💯 stay doing your thing lil dude👍🥇
I got a genuine 22mm mikuni carb mb200 header pipe predator 212 governor still in 42 tooth 12 tooth centrifugal clutch hitting 56mph keep it up Royal Jz subscribe if ur new like the video
@@RoyalJZ obviously there for protection you didn’t blow the motor when you were gapping those kids on the stock pred right? Therefore statement makes no sense you need billet parts to go over 30 but yet the stock motor does 45.🤔🫡
@@-allblck1gunman-286 The video when I gapped the kids I was only doing 50 mph around 7800 rpms. it’s proven that a 212 predator can do 50 mph without blowing the flywheel magnet. Once you start going higher in the rpms to reach 60 mph it’s a greater risk of blowing the flywheel or rod
I'm proud of you man you are really showing progress. No where but up. Keep up the great work
Man, this thing is fast. This is the exact kind of set up I would like to have.
I have a predator hemi , with just a vm22, and a header, and it does 60+mph. im in Atl. Im from L.A. I miss riding in compton down alameda . shoutout to you bro. keep up the good work .
Wat gearing you running trying to get my mega moto right and I'm thinking of 15t clutch and 55t sprocket I want to do 60+ but still be decent on the take off
@@baker666kennels9 that should help. im running 17t/75. my bike does 60+
@@1of1minis did u remove the governor and wats your take off like and I have the ducar 212 with the stock 75t sprocket on the rear might just go with ur set up first thanks bro
@@1of1minis how r y'all getting such high speeds? my go kart has an 11 inch drive tire on 18/60 and im only getting about 45mph, on 12/60 I was getting about 30 top
@@blxebxrry3 they are wrong. No possible way you could do what they claim with nothing billet or 18 lbs springs.
You can also put lighter shoes in the Max torque clutch. I did the black spring , lighter shoes and 12 tooth on the clutch and hit 69 mph
What's your gearing n what's done to the engine internal wise👀👀👀
That flywheel should be 32 degrees BTDC. So you should be at 36 degrees. Timing wheel is a good thing to have if you're sticking with this which I know you will. Have you tried ratio rockers? I got a set sitting at the shop I may use when I build one of my other engines.
Nah never used any other rockers besides stock but I’m probably going to build a race motor
I need a jockey
Nice video. Love the header sound. Much love from Texas.
Mad Props to you RoyalJZ that's Awesome! PLEASE do a video with all you did on the Build .
12 tooth clutch add a 36 tooth rear sprocket. I did 67mph. Felix Mayes.
Oh yeah stock cam pred..224. and stock carb, Header pipe.
Royal gang please stand up 👏🏽👏🏽
Gonna get smacked up running them stop signs like that on that tiny bike if you keep doing that.. be safe
Really wish I knew you needed to upgrade your rod before i removed the gov and added a carb, sadly for me i ended up blowing a hole straight through my engine. we win some we loose some !
I hit 62 mph on a fully stock 212 on a ct200u, it has no governor, 18 Lbs springs , carb and pipe ; got it on gps at 62 top speed , stock flywheel and rod
Me to
@@Flaggrassmonkey the bigger tire bikes have a higher top speed I’ve noticed
have your flywheel or rod blown up yet
i wanna do this but i don’t trust my flywheel or rod lmao
also waiting to do billet internals
@@ct200u definitely gotta have billet internals
When Mine was stoke it went 55 down a hill and never exploded I was wide open throttle for at least more than 15 seconds
Max Torque gotta video on RUclips all about it, also shows how to cut the clutch shoes in half to double the contact area and create total lockup.
My lil bike in the kitchen gettn some work. Good work braaah. ✌👍
Probably nothing going to cut the shoes don’t have nothing for a clean cut
u did it bruh thats crazzzy good stuff mane
That's awesome! I'm going to try that next. Thanks
Send the link to the app you use to watch the mph
Sheeeesh..... It's 4sho fast. Keep doin yo thang. Billet flywheel and rod 4 40mph plus. Thanks 4 da advice 👍
You can get away without but it’s a risk to blow the motor
@@RoyalJZ yeah i ain't trying 2 blow da motor. Wat kinda brakes u suggest? I jus ordered sum hydrolic. Was thinkin bout da band dat goes over da clutch 🤔
Do dat my dude!!!💥💯👍🏾
That’s fast.Good job.
Mini bike is movingggggggg .
Movingggg😂
🔥🔥🔥 good stuff my dude
I run a 40t an 10t max tourqe with no gov Pz27 and 26lb valve springs on a doodle bug and I hit 60 mph
Make sure u guys lap your flywheel if ur not using a key . A degree wheel would help if the degree but if not then eye it out .
What speed app you use?
Bro my brother and law hit 65 with stock rod and cam stock head he had vm22 and straight pipe but I love the sound of your bike it's nasty love this video
Good work G!!💪🏾
That's awesome man I didn't know arc flywheels could help advance the timing
I'm making one, weld a rear star to the centrifugal clutch cap
Badass💨💨🙌🏽
Bouta try out a 265 Cam & 22pd springs on my stock motor just Got PWK 28 on it rn. What speeds you think I might hit? & is it a safe came to run w/o piston & rod
I know this is late but definitely get a flywheel and rod !!
Awesome job 👏🏽‼️keep up this good content ‼️🔥💯😎👍🏽
Thanks for watching 🔥
I'm ryden blu taco fram with makunic carb and pipe a dip waiting for 212 predator clutch and it's on frfr I did wanna keep twerk converter but don't weld so took it off so engine would line ...
I got mine on the big boy chopper frame I need know where u ordered ya pipe from
Noti gang yesi
Good looking 🔥🔥
Oh hell yeah bro 😎
Your weight is a contributing factor
What is the gearing
He said 10/36
Im trying to take my governor out of my predator 212 do i need the connecting rod?
Respect
Currently building a trike. Really hoping I can hit 60 with some mods
Hey friend what did you do to get your bike to go from 50 miles an hour to 65 miles an hour, mine has a
Cam but it’s gear different than yours so it only goes 55
What valve springs ?
What sprocket sizes u running?
How much for one tou to do for someone one
It’s a only a matter a time till your cam goes flat
😂 I got like 3 stock cams but I’ll probably change it out for something better later on
What's the horsepower you using on it I want to know that way I can build me one
You should make a video on how to port a head
Going soon
What app u use to text ur speed
Yesssirrr
Drop teeth on sprocket for more top speed
all in gearing, i hit 60 on a bicycle with a 212 stock rod , stock carb, and stock flywheel
What gearing setup
whatt????
Cap 😂😂
What timing key u used
That boy say he did his thang too that motor, keep building them, you'll realize that it's not always more money more power, I've done a budget build with a dino cm 265 cam $50 cam with ratio rockers the cheap stamped ones. Straight pulling the fuck away from big cam bikes 🤣
Yup you don’t need the high dollar parts to be fast
Nice job! Keep using that high octane. The more timing you give the motor the higher the octane fuel you want to run.
I just don’t know how much timing I can give my motor
Dawg my 5hp briggs flathead engine after port polish sanding head/brow 26mm mukuni 8offset key mildest cam only drank fresh 93 that mf would knock without it
Parts list pls ?
Damn that shit hella fast...mines only go 40 lol🤦♂️
Damn cheap mods can change that
Get a air filter, pipe, change sprocket and chain get sum new wheels
Nice 👍
Just da carb n pipe can do 65 with out da springs n fly wheel
What are some good bolt on mods I can do to my Motor
Video coming soon!
I know cuz mine is just with da carb n a pipe n it hit 60 already n my motor still goo
Come on man give us the full run down on the built we trying get some 60mph too bruh bruh
It’s all about gearing
Naw bro I got 5 mini bikes but mine bigger then yours I'm from d.c
You guys in La ride the little ones.
I brake my Jackshaft off and straight chain it zip tie 38 back sprocket racing clutch racing chain from go power sports boy I'm doing 71 mph don't need all that🤷🏿♂️💯 you lose torque but my top end is crazy💨🏍💨💯 stay doing your thing lil dude👍🥇
I guess I gotta make a vid on how to advance or retard the timing 🙄
u had that max torque clutch on it 🤫
Yessir i got a black spring coming for it soon
Pog🔥
What's all the mods
NOTI SQUAAAA
🔥🔥 sheesh
What are the mods you have right now?
Billet rod and flywheel any carb and timing key
How much rpm is your minibike
😂 idk i probably going to buy rpm tach
Get a tach hour
@@alexytgaming4543 imma get one soon
Like my minibike half gas is like 5,500rpm
And full is probably like 7,500-8,000 rpm
How do you fuck with the timing
Where did u get ur bike?
Gts hobbies on Instagram
nah bro i got built predator 212 with a 315cam and I can’t even go 60 what am I doing wrong
🤨damn probably take the motor apart and check everything out
Too tall rear sprocket..
Yeah it's loud too stop setting off my car alarm when you hit the block looking a,ss
Yeah bike rev up higher hopefully this clutch spring make it rev up higher
I got a genuine 22mm mikuni carb mb200 header pipe predator 212 governor still in 42 tooth 12 tooth centrifugal clutch hitting 56mph keep it up Royal Jz subscribe if ur new like the video
What size chain are you running ?
SIIIIIIIIIICK! wanna do that to a bicycle.
whats the app
Ad a torque converter and go down 4 teeth on the rear sprocket man. I guarantee 75 mph
Mines stock and it goes 61
Stock cam?? Boy you crazy 😂😂 thats crazy tho hitting that high rpm?
I was shocked myself😂😂
stop sign
10 tooth front 51 tooth rear on a stock bike doing 55 mph
What’s done to it
Says stock engine goes 45 but you need a billet rod and flywheel to go over 30 😂🎉 my 3hp goes 42 stock!
Billet parts is just for protection. Don’t want to blow a motor to prove a point
@@RoyalJZ obviously there for protection you didn’t blow the motor when you were gapping those kids on the stock pred right? Therefore statement makes no sense you need billet parts to go over 30 but yet the stock motor does 45.🤔🫡
@@-allblck1gunman-286 The video when I gapped the kids I was only doing 50 mph around 7800 rpms. it’s proven that a 212 predator can do 50 mph without blowing the flywheel magnet. Once you start going higher in the rpms to reach 60 mph it’s a greater risk of blowing the flywheel or rod
🔥 📛 👨🚒 🚒 🧯 🎆 🔥 #Minibikelife let's go
I’m sorry to tell you I hit 63 all stock
Besides the upgraded carb all stock, no flywheel no rod no springs
💪💪💯✔️
Not a stock cam. Quite obviously.
No way
I was shocked too😂
hit 66 with stage 1 with 18" springs stock cam stock flywheel and stock rod and no timing and stock carb, but on a racing kart 212cc predator
I was stuck on 50 mph before I added timing
I get 62mph completely stock engine 52 rear and 13 tooth clutch gear
You weigh like 90 pounds?
My sons Deadpool bike is stock just carb and pipe and hits 65 he beat a alky bike last Sunday haha 😆 GTS Hobbies ftw Speed Addicts 1320 ftw 🦾🚀🏁
People sleep on a stock cam just have to set it up right
Wat gearing you running