If you can tig weld or know someone that can, I’d suggest you make a custom gas tank that runs along the entire length of the underside of your top tube. Just a thought.
Going that fast you need to get a steering stabilizer because if the bars move one way too much while you’re tucked down it will just throw you off. I had it happen to me on a different bike with taller bars where my hands were right in front of me and up some more.
74.1 MPH = 119.3 KPH Safe riding brother, be careful and maybe wear more layers because even that footpath is able to turn you into human mincemeat and I'm sure you know that. You don't regret riding naked until it's too late.
Ngl as long as you know defensive driving u don’t need all that padding forreal , just drive safe and always be careful for others that aren’t use to seeing a motorcycle on the free way or street
Yo man what clutch are your using and what do you recommend torque converter or clutch I'ma be doing a 301 build but I might wanna run a clutch you let me know
I’m running a regular $25 clutch from Amazon. I cut the springs shorter from it so it won’t burn the clutch at idle or low rpm but it ran great and had no issues. Right now I’m in the process of making it run with a 40 series torque converter but I will make a video on it once it’s running.
I have other question sir I appreciate ur help in regards to drilling out the dial pen area. I was wondering if you could explain that just a bit more or if by any chance you may have a picture ? Of how u did this in odder to fit everything properly also it’s ok to remove the electric starter and just have that hole open exposed as well ? Thank u sir.
Yes i removed the whole starter assembly and I now have the hole exposed. It will be safe to run as far as I know as long as nothing gets caught in there because the flywheel is exposed a little. I can actually show you exactly how I drilled out the area where the dial pen goes. I will have a video up soon but I’ll upload a RUclips shorts about it since I’m trying out a new torque converter for it to see the difference and I can show you exactly what I did to make it fit.
@@larryluna36 brother u are the man thank u sir helping me out me that I rather be safe then sorry and I got everything loking really good at this point just last thing to do is the drilling for the clutch in the shaft to fit as you did I’m super excited and thank u again for the awsome ideas u came up wirh to make it work.
Check out my new video i just posted. I explained how I drilled out the dial pen area more and showed exactly how I did it. ruclips.net/video/paAm6aje5-U/видео.htmlfeature=shared
Starting with a 420cc even stock is already a head start because of how much more power and torque it has over a 212cc. The carb I’m using is a flat slide 28mm and the jet is a 120 and needle position is 2nd to the bottom. It runs perfectly smooth it doesn’t bog at all but I think it could use a little more tuning because the spark plug isn’t colored the way it should be
@@larryluna36 I got a 24mm pwk i got a 140 main 32 pilot silver needle in middle but im at 212cc 308 cam 1:1 champion rockers 27/25mm SS valves. You may need the main to be richer ? Subbed following the progress
what tire size and gear ratio u got ? i got a 420cc with stock style carb - 3.85 ratio - 145/70-6 tire and just hit 61mph today after i removed the balancer (wanted to see what it does - gained 1mph)
I have 5 inch tri-star rims with 11/5-5 tire rear and 4.10/3.50-5 front tire. Gearing on clutch is 14tooth and 35tooth rear sprocket. Motor is all stock just 28mm carb, exhaust and governor delete.
This is a standard 5 inch BAM frame, not a custom frame it’s just a regular 5 inch frame. You will run into problems with clearance in a couple different places but I’d recommend you buy the gopower sports big block plate adapter to make it a lot easier.
That thing got a lot of room for improvement. Cam/valve springs?? 30mm carb? Better clutch? All things that will MPH faster. I bet you a clutch gets you 5mph. I have a cheap one now and it has to go. It ruins top end
It certainly does have a lot to improve. The only thing done to it is governor delete, a 28mm carb and exhaust with muffler. I do need to get a new exhaust because this one right now is for a 212 and the tube size is actually restricting the exhaust flow and it has a muffler to make it even more restrictive.
It will definitely be a difference I heard the flywheels on these big blocks are significantly lighter. I will start adding performance parts next and just make it even crazier!! 🤣 thanks for watching
I have a video up on my RUclips showing the process but I bought a gopower sports big block mounting plate and drilled new holes on my frame and had to grind the block a little .
I honestly found the best carb set up for my old predator 212cc was a Amazon 26mm round slide carb. It ran perfect for me with a 125 jet and the little clip being 2nd to the top slot on the needle.
So great !!!! It’s fun watching you figure it out .
Thanks for watching!!
Hell yeah homie big difference now shit is bad ass
Thank you man I appreciate the support. I have bigger plans for it still.
these big blocks are awesome, just hard to gear it for starting on hills and slow street riding as you are limited with the 14 tooth clutch
Yes the only thing you can do is change the rear sprocket
If you can tig weld or know someone that can, I’d suggest you make a custom gas tank that runs along the entire length of the underside of your top tube. Just a thought.
I actually wanted to do that and get a 1 Gallon cylinder tank but someone I know stopped making them for a while.
Sick dude. Can you do a video on how to tune properly 🙏🏼
Of course I will take my time to explain that and do a video on that very soon.
🔥🔥🔥🔥🔥🔥
That things a death wish😂 love it
It really is now and I have more plans for it still😂
Going that fast you need to get a steering stabilizer because if the bars move one way too much while you’re tucked down it will just throw you off. I had it happen to me on a different bike with taller bars where my hands were right in front of me and up some more.
Thank you for that information. I didn’t know I needed one but I will look into it.
Clean bike
Thank you man I appreciate the support!!
try a polini dream bike 12,5 hp it will lift the front end even at 30mph have to hold it on the back brakes. cute build though
I’ve heard of those engines 😂 I’ve never actually ridden one but I heard they’re very wheelie happy
74.1 MPH = 119.3 KPH
Safe riding brother, be careful and maybe wear more layers because even that footpath is able to turn you into human mincemeat and I'm sure you know that.
You don't regret riding naked until it's too late.
Thank you and that is very true. I appreciate it
Ngl as long as you know defensive driving u don’t need all that padding forreal , just drive safe and always be careful for others that aren’t use to seeing a motorcycle on the free way or street
Yo man what clutch are your using and what do you recommend torque converter or clutch I'ma be doing a 301 build but I might wanna run a clutch you let me know
I’m running a regular $25 clutch from Amazon. I cut the springs shorter from it so it won’t burn the clutch at idle or low rpm but it ran great and had no issues. Right now I’m in the process of making it run with a 40 series torque converter but I will make a video on it once it’s running.
nice bike man! you might be able to get more power by using grippier tires and better quality fuel
I think so too it’s basically all stock right now and just running on regular gas
🎉🎉❤
Thank you for the support!!
I have other question sir I appreciate ur help in regards to drilling out the dial pen area. I was wondering if you could explain that just a bit more or if by any chance you may have a picture ? Of how u did this in odder to fit everything properly also it’s ok to remove the electric starter and just have that hole open exposed as well ? Thank u sir.
Yes i removed the whole starter assembly and I now have the hole exposed. It will be safe to run as far as I know as long as nothing gets caught in there because the flywheel is exposed a little. I can actually show you exactly how I drilled out the area where the dial pen goes. I will have a video up soon but I’ll upload a RUclips shorts about it since I’m trying out a new torque converter for it to see the difference and I can show you exactly what I did to make it fit.
@@larryluna36 brother u are the man thank u sir helping me out me that I rather be safe then sorry and I got everything loking really good at this point just last thing to do is the drilling for the clutch in the shaft to fit as you did I’m super excited and thank u again for the awsome ideas u came up wirh to make it work.
@@nutsnbolts4601 No problem man!! Thanks for watching and supporting the channel
Check out my new video i just posted. I explained how I drilled out the dial pen area more and showed exactly how I did it.
ruclips.net/video/paAm6aje5-U/видео.htmlfeature=shared
Wow 😮
It is a Very fast bike 😂
i got a 212cc built drag bike but the torque heavy 420cc is drawing me in to build another!! what was your carb size, and jetting ??
Starting with a 420cc even stock is already a head start because of how much more power and torque it has over a 212cc. The carb I’m using is a flat slide 28mm and the jet is a 120 and needle position is 2nd to the bottom. It runs perfectly smooth it doesn’t bog at all but I think it could use a little more tuning because the spark plug isn’t colored the way it should be
@@larryluna36 I got a 24mm pwk i got a 140 main 32 pilot silver needle in middle but im at 212cc 308 cam 1:1 champion rockers 27/25mm SS valves. You may need the main to be richer ? Subbed following the progress
what tire size and gear ratio u got ? i got a 420cc with stock style carb - 3.85 ratio - 145/70-6 tire and just hit 61mph today after i removed the balancer (wanted to see what it does - gained 1mph)
I have 5 inch tri-star rims with 11/5-5 tire rear and 4.10/3.50-5 front tire. Gearing on clutch is 14tooth and 35tooth rear sprocket. Motor is all stock just 28mm carb, exhaust and governor delete.
What frame is this? I want to build one with a 420 or 469 but I’m worried about engine clearance
This is a standard 5 inch BAM frame, not a custom frame it’s just a regular 5 inch frame. You will run into problems with clearance in a couple different places but I’d recommend you buy the gopower sports big block plate adapter to make it a lot easier.
Bro you needa seriously upgrade ur brakes 💯 fuckin awesome bike build tho 💯
Thank you man I appreciate it!! This foot brake finally works good now but yeah i know a actual disk brake set up would be much better
@@larryluna36 yeah get hydraulics 👍🏼👍🏼
That thing got a lot of room for improvement. Cam/valve springs?? 30mm carb? Better clutch? All things that will MPH faster. I bet you a clutch gets you 5mph. I have a cheap one now and it has to go. It ruins top end
It certainly does have a lot to improve. The only thing done to it is governor delete, a 28mm carb and exhaust with muffler. I do need to get a new exhaust because this one right now is for a 212 and the tube size is actually restricting the exhaust flow and it has a muffler to make it even more restrictive.
Internally everything is bone stock. No cam no valve springs or anything it’s completely stock just how it came out of the box
@@larryluna36where did you get the frame from
@@mdp9810 I got the frame from @backalleyminibikes on Instagram I messaged them and they were quick to reply.
@@larryluna36 thank you 🙏
hi back again im having trouble finding the right wheels i was thinking of buying citta girela wheels but i dont know
I’m running a 5 inch tri-star rim with CST tire
@@larryluna36 thx i'l look into it
@@larryluna36 ok so i looked and found big 17 inch tires that could go 220km/h and im making mine 200km/h so it will be fine
Yes you will be fine
Can you drop ths link for the rear sprocket
I got the rear sprocket from srericsgarage on insta.
I love your video now add a billet flywheel and get more top speed and take off
It will definitely be a difference I heard the flywheels on these big blocks are significantly lighter. I will start adding performance parts next and just make it even crazier!! 🤣 thanks for watching
@@larryluna36 your bike flying
What speedo app do you use
It’s called Speedometer 55 GPS Speed & HUD it’s only available for iPhone.
THAT THING IS FASTER THEN MY 125 I TOP OUT AT 80KMH
It is 😂 do you have a 125cc dirt bike?
@@larryluna36 yeah its a pos lmao
@@larryluna36 its on my page if you wanna check it out 1 down 3 up 125 4 stroke
I recently bought a mega moto with a 98cc engine and a slight mod, I was testing out how fast i could go yesterday and reached 71kmh
are you in the Santa Ana area I ride out on that river bed all the time
Yes this is the Santa Ana river bed trail
Goes faster then my 700cc quad 😑
😂 that quad will destroy this mini bike off road though. They’re so much fun
@@larryluna36 Tru dat
How did you mount the engine?
I have a video up on my RUclips showing the process but I bought a gopower sports big block mounting plate and drilled new holes on my frame and had to grind the block a little .
@@larryluna36 heck yeah
what frame is that engine sitting on?
It’s a BAM 5” Frame it’s not custom just regular frame.
What was ur gearing?
It’s 14tooth on the clutch and 35tooth on the rear wheel
What's the best carb for a stock 212 with a budget?
I honestly found the best carb set up for my old predator 212cc was a Amazon 26mm round slide carb. It ran perfect for me with a 125 jet and the little clip being 2nd to the top slot on the needle.
@@larryluna36 how much do they cost?
I’ve seen the whole kit that comes with extra jets,filter,intake manifold and hardware for about $35-50
My 212cc all it had done to it was springs, 26mm carb, and exhaust and that carb set up was perfect for me and gained a good amount of power/speed.
@@larryluna36 thats nice I'll have to look in purchasing one
What rim & tire size?
Rims are 5 inch tri star and tires are 11 inches
That is so sketch!!! I barely could go 30 on mine and it’s already fast 😭
It is sketchy and there’s people who go over 90-100 that must feel crazier
That's a stock engine fasho
Yes all stock internals with this 420cc predator