When loaded into Revit project; the PARTIAL command does not trim the edges of the panel as it does within the family file, It is to be mention that OVERHANG and EMPTY commands work properly, therefore, I would like to ask you whether it is model issue or a parametric mistake. Thanks
without looking at the revit files, i would say it is probably a modeling issue. these custom adaptive curtain panels are meant to be used within a patterning structure within the conceptual family editor environment. I hope this helps.
Dzan Ta thanks for your reply I did some research in Autodesk forums in that very subject, wondering if you would be interested in make a video from, that’ll be well regarded, link as follows; forums.autodesk.com/t5/revit-architecture-forum/border-tile-partial-leaves-overhang/m-p/5813786#M98832 Cheers
This mouse cursor only displays when I am using Autodesk Screencast recording software. You may be able to change to a different mouse icon via windows Mouse settings
you saved my weekend, or else i would possibly chewing myself out to figure this out.
Thank you. very informative.
You're welcome.
When loaded into Revit project; the PARTIAL command does not trim the edges of the panel as it does within the family file,
It is to be mention that OVERHANG and EMPTY commands work properly, therefore, I would like to ask you whether it is model issue or a parametric mistake.
Thanks
without looking at the revit files, i would say it is probably a modeling issue. these custom adaptive curtain panels are meant to be used within a patterning structure within the conceptual family editor environment. I hope this helps.
Dzan Ta thanks for your reply
I did some research in Autodesk forums in that very subject, wondering if you would be interested in make a video from, that’ll be well regarded, link as follows;
forums.autodesk.com/t5/revit-architecture-forum/border-tile-partial-leaves-overhang/m-p/5813786#M98832
Cheers
How to get frames of individual panels bend exactly like a surface?
Select grid pattern and change to a different pattern such as rhomboid. Then, build your framework accordingly
It does not work for me. They get out of proportion when loaded.
nestcuni verify you have draw your sweep profile on the correct plane which is perpendicular to the path
hi. how can i get this mouse cursor?
This mouse cursor only displays when I am using Autodesk Screencast recording software. You may be able to change to a different mouse icon via windows Mouse settings
sir we need How to put Doors on Curtain Walls in Revit 2018 version please
see the following video:
knowledge.autodesk.com/community/screencast/39cfb6d1-e25e-4568-aced-1427716988bb
Thanks a lot sir
you are welcome
thanks for helpful video sir
you are welcome...don't forget to like and share...