HOW TO ADJUST CAR DOOR THAT DOES NOT CLOSE demonstrated on PORSCHE
HTML-код
- Опубликовано: 16 янв 2019
- HOW TO ADJUST DOOR ON CAR. WIND NOISE FIX
If your car door does not close all the way or you hear wind noise you might just need to adjust your door. The front left door on our Porsche did not close right. It was hanging a little low and you could hear some wind noise as well. We showed you how to adjust the door on this Porsche Cayenne but many vehicles will use the same design escpecially VW, AUDI, SKODA, SEAT.
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. 
Авто/Мото
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
A repair manual I was looking through mentioned using a marker to mark the original position of the bolts so that when you loosen them (and the door "drops") you will be able to see where your starting position was.
Probably not the audience you were going for, but I just used your video to fix the door on my 1983 Ford Ranger. Thanks!
Ye i used your vid too to fix my 1989 Honda Accord EX 2.0 and it worked well!! Thanks man
Just did my 2003 ranger too! Worked perfect!!
I'm getting ready to fix the door of a mini-van. I love videos that apply across vehicle types and brands!
My door sagged way more on my Volvo s80, found this and very helpful thank you 😊
I tried this on a 2001 nissan pulsar that has hinges that are worn making the door sag but with no luck. The bolt holes in the door are not adjustable like your car. To fix it I loosened off the 2 bottom hinge bolts a fair amount, used a car jack and a bit of wood to jack up and hold the end of the door up and then I put a "shim" piece of metal about 2mm thick in the gap between the bottom door frame and the hinge plate. Tightened up the bolts and removed the jack. The shim pushes the door frame "up" at the rear so the door then aligns with the latch properly. Problem solved. Thanks for the video.
It is amazing how you got the door fit perfect by guess work. If I did it several try's and lots of patience would be needed.
I Love all of your Videos when I get a chance to watch them. My passenger door on my vehicle Benz Defender and when I open and shut the door so I'm Going to take your advice and try to fix my own so Thanks for the help
Thank you! Really helpful. Best channel on RUclips 💪🏼
Is try that ??
I find this most simple and very good tutorial. Thank you
Man I love you guys! I was having that problem after install a new window motor regulator!
Perfect video, thank you
Watched a ton of videos 6 months ago and wish I would have found your channel then. Thanks great video
Thanks, this is a very good guide !
guys i love your videos,everytime i watch one of your videos i get all the answers i need :D thank you very much!
Thanks so much!
Yo I’m subscribing in your freaking channel . I’ve been looking for this for weeks now because my Nissan Altima rear left door isn’t 100 close . I will do this … I’m so happy … thank you
Dude your'e a hero. Thank you!
Very good!!!!!!! I'll try that out, first, for the very same problem!!!!!
Very thankful to u ..... Very use full for me
Well done bro
Thanks so much! I have the same problem with my Touareg 2!
I fix by this way
İ had need right this video.👏🏻👏🏻 thx
We use a scissor jack and a board to level the door out before we retorque them.
very helpful...sorted In 5 mins on Vw Cc
Thanks!
This is great for door hinges that aren't welded on. For door hinges that are welded and have the brass bushings that have worn out and the owner didn't replace them and the hole egged shaped out, it is a much harder fix.
Yeah like you’re screwed 😢
Tip for anyone else trying this. Accidentally tighten the bolts when your door is slightly too far foward and it will not open enough to try again. I'm sitting here desperately trying to fit the spanner in the tiny gap without pushing the door so far open that it scrapes and bends the outer panels.
Great video!
Thx.
I was messing with my buddy and slammed on the breaks as he was trying to get in and he flew into the door. I tried bending the hinges back but still get a TON of wind noise. I didn't realize you can adjust the door up and down. Ill try this out thanks!
Well, that’s not very nice💀
New hinge pins and bushings
My wife took our 2012 Armada to a shop here in Anchorage,Alaska and they told her its 4k to fix it🤦♂️🤦♂️Thank you for this video..Damn rip off..
Excellent
Thank you!
Thank you I just bought an Audi TT with the same problem. The door was sagging a bit and causing it to leak water into the car.
10 minutes job , u saved me 300😊
Awesome! I didn't know doors were adjustable. I'll give it a try on my Highlander.
There is also a problem with rubber on the metal latch on door that wears out.
Hello, thanks for the tip. the hinge on the top, how do you remove it? mine is slightly bent from an accident it has one bolt on the outside and the other bolt inside the a pillar. its almost impossible to reach going through the electrical connector harness. any help is applicated.
My VW Passat driver side door is killing me with that exact problem!! Gonna give it a try
Did it work for your vw passat
@@keegy1965 no. I had to do a lot of tweaking to get my door to close and lock properly. It may work for you though.
I did this and my cayenne turned into a transformer he's now destroying the yard ? 😳
Maybe tape the edge of the door so when your sticking the socket in there it doesn't scratch the paint like it did in this video.
Thnx. I have Touareg with the same door as the porsche (they came from the same factory line) and the wind noise is bothering me.
Just did this method tbh it made my door worst it won’t shut lol off to the garage now it’s sorted😅
I think you left out a lot of important details. This method normally won't work as there are other issues involved.
Typically on an older car or a door that has been used a lot, the door bushings will wear out because they are typically oil impregnated brass. This is so the structural part of the hinge doesn't get damaged and for smoother operation. Adjusting hinges because of worn out bushings is not the ideal repair method. Not when bushings are $20 or less.
The other issue can be because the sheet metal on the door has sagged at the hinge locations. This is more common on 2 door vehicles as the heavier doors cause more stress on the hinge areas. If the hinge bushings are good, you can adjust the door by placing a floor jack with a 2x4 on it near the bottom edge of the door. About 10-12" forward of the rear of the door. With the door almost closed, jack the door up several inches. Compare the striker bolt to the door latch groove. You will have to go a little past the striker as the weight of the door will pull it back down. This may take several attempts to get it right. When correct, the striker should be centered in the latch groove. I like to have the striker more to the bottom of the groove so it will stay aligned longer as the hinges wear and the metal sags over time.
Unless it's been in an accident, using the bolts to adjust the door position is not the main problem 90% of the time.
Cool story bruh, needs more dragons and castles and sheeeeeeit
Only loosen the top to ajust pitch. Dont touch the bottom.
That looks easy but is it for any vehicle 🚗 ? Ford f-150
My BMW 730 Ld shows door open on the dashboard and it has softdoor. This has started from a week, I will try the suggestion and see if I can save money by DIY, Thanks
The other way, the other way
Same like my 2010 a6. Same problem also.
Thank you!
must be nice to have adjustable doors
What size spline socket is needed for this?
How to adjust a front door that aligns properly up and down but the edge between the front and back door sticks out and 1/8th inch. With non adjustable striker.
Hi. My car has a dropped door. Its a Vauxhall Astra mk5 3 door. It has brackets that are welded to both the door and car. I tried just opening the door a little and lifting by hand but it didn't do anything. I'm a bit worried about using a jack to lift the door. Any suggestions on how to fix welded brackets? Thanks
did you manage to fix it? i have the same issue only with the mk3 cabriolet
@casperveneman1151 Hey. Yeah I did. I got a new set of door pins and also adjusted the door latch just a tiny bit.
How can I adjust the headlights on my Porsche Cayenne 2008 v6 I can't find a single tutorial any where . Hope you guys can help me out adjusting my headlights . Thanks
I have an '03 Corolla, had the passenger door open and started going In reverse cause I was testing a dash cam, by the time I realized it was open it was already too late. The door caught onto the dirt and folded outwards, heard something crack but nothing broke. The door is now rubbing with the fender and the door has damage lol.
Have the same problem on my shitty Peugeot 307. Will try it today
How do you fix a door that has a horrible clanking sound as it closes instead of the satisfaction sound of a smoothly closed door?
Looks like Russian accent, or Germany?
Will go now trying adjust, thanks
some people just use wood its that posible?
My opel corsa has no adjustment bolts. Only hinge pins!
The door is sagging because the top bolt had a massive gap before you touched it...
Not work after need to bend the door
. littel up after the door close properly
My mums passenger door on her Porsche doesn’t open how can I fix that
She got a Porsche she can pay to fix it
Meineke:
240$ Parts
150$ Labor
69$ for bringing your car to meineke
Total: 1,150$
что за акцент?)
🇧🇬
Where do you come from?? Your accent is different
Im almost certain they are Bulgarian
Sounds french
adjust your dog? why would i want to adjust my dog.
"dat is one ting, anoder ting"???? Eastern European!