The drivers side has an electronic module inside the door that plugs into the window motor.Its called a one touch button module.That might be causing the clicking noise from the motor.Its supposed to sense when the motor bottoms out by load sensing and shut the motor off.
Leave the window all the way up disconnect the wire to the window motor take the three screws off the window motor reach your hand in there take the motor out replace it or fix the motor itself open up the motor regulator you can fix the regulator by pretty 3. 10 mm screws in it and it will work fine I just changed mine fixed the motor itself and did everything within 5 to 10 minutes very easy
I tried tackling this job today. My window rolled down but wouldn’t go back up. No warning. It was smooth sailing getting the panels off and testing the switches and fuses which were good. But I was unable to get the regulator assembly off. It seems riveted in place. I manually rolled up my window but scraped my window tint in the process.. will try and retackle this in the morning.
The drivers side has an electronic module inside the door that plugs into the window motor.Its called a one touch button module.That might be causing the clicking noise from the motor.Its supposed to sense when the motor bottoms out by load sensing and shut the motor off.
Leave the window all the way up disconnect the wire to the window motor take the three screws off the window motor reach your hand in there take the motor out replace it or fix the motor itself open up the motor regulator you can fix the regulator by pretty 3. 10 mm screws in it and it will work fine I just changed mine fixed the motor itself and did everything within 5 to 10 minutes very easy
Thanks - informative!
Thanks for the help
Made it look easy. Great job 👍🏼
I tried tackling this job today. My window rolled down but wouldn’t go back up. No warning. It was smooth sailing getting the panels off and testing the switches and fuses which were good. But I was unable to get the regulator assembly off. It seems riveted in place. I manually rolled up my window but scraped my window tint in the process.. will try and retackle this in the morning.
Been a while but any update ??
Stuck on the same process now I can’t get it off bc it’s riveted
You’ll have to drill those rivets out bro unfortunately
Good idea with the suction cup!
I love you bro you are the friend 12:28 lol
Leave the window up take the three screws off the motor disc
Thanks fellas
Great video! Thank you
hey my mustang is overheating when i'm at a stop for too long when its super hot outside. doesn't happen when its cold outside. what should i do?
Check the electric fan mounted to the radiator it should kick on when the car reaches a certain temperature if doesn't thats the problem.
This video could have been 10 mins shorter.
@@chris10077 yo might have air trapped in cooling system/ or bad fan or fan/ temp switch
Just did one today for a customer. It was a bitch