Replacing Fuel Injectors on Honda Element | Turbo Toaster Part 9: Upgrading Fuel Injectors | k24

Поделиться
HTML-код
  • Опубликовано: 25 окт 2024

Комментарии • 6

  • @claudiosousa153
    @claudiosousa153 2 месяца назад +1

    You should pull the fuel pump relay and run the car till stall to remove all the pressurized fuel before this procedure.

    • @TheMileHighMechanic
      @TheMileHighMechanic  2 месяца назад

      @@claudiosousa153 I would say yes if you just ran the car. In my case the car was sitting for a few weeks before I did the pump. There isn't any fuel pressure in the system as long as the car has sat for a couple of hours, so there was no need to bleed any pressure off. Your absolutely right if it did have pressure

  • @regalt1987
    @regalt1987 Год назад +1

    Please tell me your going to pretty that up a bit. maybe a cool color tubing.

    • @TheMileHighMechanic
      @TheMileHighMechanic  Год назад

      All of the covers have gone back on to cover up the wires/fuel rail and intake....somewhat pretty

  • @regalt1987
    @regalt1987 Год назад +1

    When are we driving this thing and how much do you want to sell it to me for?