I can't imagine the cable management. I own those same fans. Despite them being one cord daisychain fans, you still need a hub & the hub has 4 channels with a max of four fans per channel. So there's 3 hubs in total in this build, with 2 hubs having the front & top radiator mounts all to themselves. And there's one more for the last two in the back lmao. I imagine you plugged one of the fan hubs into the outside USB port on the mobo, since I think the mobo only has two USB 2.0 headers lol.
Very nice! Seeing this got me back interested in building out a 1000D I had bought a couple of years ago. It won't be anywhere near your level of workmanship, but am now considering quad 480's. Great work!
I did it with 32 fans, all LL120 using 2 commander XT, 4 pwr splitters and 4 rpg lightning nodes from Corsair. Just be careful to mark each lead by number and you can set them to cascade.@@russdubz
The case + radiators + fans (not the same brand of radiator or fans) from overclockers comes to about £3,000 only know this because i went through the agony of buying it
very nice, but for security reason, I prefer the power supply on top of the chassis.. Just in case you got a water leakage... You don't want water in your power supply...
Почитай на сайте производителя что там указано по максимальному значению по Омам, или это другая ревизия, потому что sl-inf 120 больше 3 не работают от контроллера ЛИЧНО У МЕНЯ @@Hamakaze174
@@ashasashas999 я прямо сейчас на официальном сайте вижу текст, что «поддерживает кластеры до 4 вентиляторов» (на разъем имеется ввиду, опять же). Общее количество вентиляторов на контроллер - до 16 шт. Не знаю почему у тебя не работает. У себя даже не проверял, да и нужды нет, но полно роликов где так подключают и все ок
Hey, I have the same case With 2 separate loops for the CPU, and the Gpu both have a extra thick 480 rad. I just added a extra thick 360 rad to the gpu loop but now the gpu is running hotter by 5°c while the coolant has gone down in temp sitting at 17°c. Used a different coolant than I usually use and there could be air trapped in the new 360 rad I have mounted on the top. Do you have any advice? I already plan on changing the coolant and getting rid of as much 90°fittings as possible to increase flow rate
You could vacuum fill. Connect a pipe to your drain valve that extend to the bottom of a hard bottle which has a volume greater than your loop. Fill the bottle. Connect a vacuum pump to the top of the bottle and turn on. All air in the loop will be drawn out of the system through the incoming coolant. Once your down to near vacuum, turn off pump and let air into top of bottle, air pressure will force fill your loop, no possibilities for trapped air.
can you do a parts list please?
no stf
@@GuancheTF95 spicy bat
- How much fans do you wish?
- Yes!
Like this Corsair’s chase.
I can't imagine the cable management. I own those same fans. Despite them being one cord daisychain fans, you still need a hub & the hub has 4 channels with a max of four fans per channel. So there's 3 hubs in total in this build, with 2 hubs having the front & top radiator mounts all to themselves. And there's one more for the last two in the back lmao. I imagine you plugged one of the fan hubs into the outside USB port on the mobo, since I think the mobo only has two USB 2.0 headers lol.
i seriously love how clean it turned out'
Bealtiful work!
Very nice! Seeing this got me back interested in building out a 1000D I had bought a couple of years ago. It won't be anywhere near your level of workmanship, but am now considering quad 480's. Great work!
Awesome build ❤
Push pull on 30 mm rad is just funny
wow best build pc
price?
@@Pro3dross Probably worth more than my car
Do some benchmarks
I want to build a big ass pc like this I’m just scared as shit if I install all that and boom liquid all over the place 🤦♂️
Test for leaks using air pressure
I did it with 32 fans, all LL120 using 2 commander XT, 4 pwr splitters and 4 rpg lightning nodes from Corsair. Just be careful to mark each lead by number and you can set them to cascade.@@russdubz
Sweet setup! Where do u get the boards from?
The case + radiators + fans (not the same brand of radiator or fans) from overclockers comes to about £3,000 only know this because i went through the agony of buying it
What is this Distro Plate for the GPU?
very nice, but for security reason, I prefer the power supply on top of the chassis.. Just in case you got a water leakage... You don't want water in your power supply...
Hi mate could you do a parts list please for my son for his birthday,
cant wait to buy this off of marketplace in 2 months for 1000 Dolors
What's the name of that two parts on the bottom left and right? Left one who connected to gpu and right one who connected to both
reservoir?
Quais peças vc usou pra conectar ao reservatório??
I really wish I knew the parts so I can build this
Whats the name of that resevoir I wanna buy that
IceManCooler
Imagine when it comes time to clean the dust and buildup of grim off all those fans !!!
He could try to reply to some messages
вентиляторов больше в раза 4 чем максимум нужно
Name of that case ?????😮
Why do you install fans on both sides of the radiators?
I don’t think your supposed to do that
For better pressure it kinda works like a suction cup
@Kee_the_goat depends on fans, rad thickness, and fin density.
Having fans both sides, in push - pull, increases the possible airflow.
I have this case but different content.
Как вы 4 штуки вентиляторов через коннектор подсоединили?
В мануале можно только 3
Или у вас новая ревизия?
Почему 3? До 4 ведь на каждый разъем контроллера (которых тоже 4), т.е всего 16 на один контроллер можно
Почитай на сайте производителя что там указано по максимальному значению по Омам, или это другая ревизия, потому что sl-inf 120 больше 3 не работают от контроллера ЛИЧНО У МЕНЯ
@@Hamakaze174
@@ashasashas999 я прямо сейчас на официальном сайте вижу текст, что «поддерживает кластеры до 4 вентиляторов» (на разъем имеется ввиду, опять же). Общее количество вентиляторов на контроллер - до 16 шт. Не знаю почему у тебя не работает. У себя даже не проверял, да и нужды нет, но полно роликов где так подключают и все ок
@@ashasashas999 а новых ревизий, насколько я знаю, вообще не было. Только реверсы недавно выпустили и все
@@Hamakaze174ну смотреть что можно на словах и тд это одно , а что по факту это совсем другое
1:17분에 나온 수냉판 어디서 구미ㅐ해요
Hey, I have the same case With 2 separate loops for the CPU, and the Gpu both have a extra thick 480 rad. I just added a extra thick 360 rad to the gpu loop but now the gpu is running hotter by 5°c while the coolant has gone down in temp sitting at 17°c. Used a different coolant than I usually use and there could be air trapped in the new 360 rad I have mounted on the top. Do you have any advice? I already plan on changing the coolant and getting rid of as much 90°fittings as possible to increase flow rate
You could vacuum fill.
Connect a pipe to your drain valve that extend to the bottom of a hard bottle which has a volume greater than your loop. Fill the bottle. Connect a vacuum pump to the top of the bottle and turn on.
All air in the loop will be drawn out of the system through the incoming coolant. Once your down to near vacuum, turn off pump and let air into top of bottle, air pressure will force fill your loop, no possibilities for trapped air.
о том что вода из крана свидетельствуют пузырьки!
price?
What is thickness of radiator?
30mm
Is the idle CPU temperature 80 degrees? What do you understand? Doesn't that matter?
I9 13 14th pura buchaaaa
Fan name
custom parts.. you can't buy it.. 🙄